The glass doesn't slide when it lays on top of rubber... so stick the pads to the lip of the rim. Maybe in line with each spoke. And lay glass on top. The pads are less visible that way and the rim won't scratch the glass.
RANDY AND ALL OF ILLIMINATE CONGRATS ON 900K I REMEMBER THE DAYS WORKING ON THE S2000 YOU ALL HAVE CAME A LONG WAY AND I LOVE THE CONTENT ALL THE TIME, STAY BLESSED ROAD TO 1MILL
I ordered 2 hoodies for m birthday in January but because I live in germany I can expect them to come in march, but I am so fricking excited I can‘t wait anymore, keep up the good work! Love you guysy❤️
@@lebuniorruiz6724 they can make decent power but the r34 is a much bigger car than the cars the k series is In, he said it was gonna be fast so maybe an ls7
Hey Randy, i made a coffe table out of my old Rays wheel, but for the base i used a large umbrella shade stand, cut the stem to desired height and welded a wheel bearing to the top. So now i can bolt on the wheel with lugs and it spins too! Like a JDM lazy susan haha. Its great! Hope that helps :)
Love the VS table!!! So jelly I would paint the basket black or get a black one and put some leds in there, would be rad af!!! Love the content always. Be safe keep it up guys!
Needs the thicker glass and led lighting strip in the barrel. The visual effects from the leds would be pretty dope especially since it's raised off the ground with the basket.
You could check one of those car themed restaurants since they have wheels for table , if I remember correctly one I went had like a barrel to make it taller then led strips and the power supply running thru inside, make a small hole for the wire to exit and route around the vs kf wheels
Contact Jayztwocents on youtube about that racing sim, I think he lives in california. He is a PC expert and a car enthusiast as well. Check out his channel.
You should get 4 pistons and rods , and somehow bolt them to the bottom and hold it up, idk how you could do it but it’s worth a shot and could look pretty sweet
@randy you should put the rubber feet on the rim lip where the glass meets the metal. That way it doesn't make noise when you bump the glass. Also when you do that it will be more secure in holding the glass still. To even further secure it use hot glue to attach the rubber to the glass [use just a small dab] to secure the feet to the glass. And .... lol if you want the table to be a bit higher ... stack the already rim on top of another "half" barrel in the bottom to give it more height. Get vu's new welder to tack the half barrel to the existing rim so the top dosent fall with the glass. Tack inside the barrel so it wont be seen
Randy cut the size of the wheel into the top of the black table and place the wheel into it and have the glass on top of the wheel. Later on in life make a base for the wheel using a old hub so the wheel can spin freely. 👍🏼
I would glue some risers on the existing glass and add a bigger glass top . It would be a 2 ties glass table . You could even add a bigger wooden circle glued to the bottom of the wheel for more stability . paint it black of course = )
I really really miss the old illiminate days of all the guys working out of an actual garage. No fancy equipment, no shop quality tools, just a genuine group of people with a hobby of cars on the side of everyday life. Not hating on the current state of illiminate, but I just miss the old days. I still notice (and appreciate) their passion for cars but I just don’t personally enjoy the more “industrialized” and “average Joe big TH-camr” feel of illiminate atm and I don’t see it ever returning to what it once was. I still love this channel and everyone in it (and I will continue watch y’all) but I just really miss the older diy style of illiminate.
Thrustmaster t300, gt omega cockpit, thrustmaster handbrake/sequential, thrustmaster 6 speed shifter, a steering wheel adapter, and a steering wheel of choice, such as like a Nardi steering wheel or vertex
I love SIM racing and I know some good stuff you should get you should either get all thrust master parts because they’re really good and could be a little cheaper. But if you want to go all out I would recommend a Fanetic sim rig because they’re super good realistic and overall one of the best brands but they are a little pricey!
For the table. If you can get Luke to weld together some pipes to make legs for it, bring a bar or pipe up to the desired height. take a wheel spacer and mount/weld it to a bracket on that upwards pipe. That way you can have it solid center mounted and put dope 326 power lugs on it
Yo you should add some LED lights to the bottom of the wheel to give it even more of a floating effect!🤔
Facrs
I was gonna say the same thing but yeah they should do that
I was actually gonna say the same thing lol
Who the fuck is commenting???
Tony: alittle goes a long way
Randy: lets put more
Randy: am i doing it right?
Tony: i guess you're doing it right 😬
Tony: $20 dollars a bottle 😭
lmao i was thinking the same thing
right lol
Randy when he upgrade his gaming set up: hmm... Get some Recaros, Vertex steering wheel and some door panels🤣🤣🤣🔥🔥🔥
🤣🤣that would be funny/dope at the same time lol,or used like a cheap car shell
@@LuisRiveraPr00 ye lmao I'm just waiting for it 🤣🤣
Randy will just get the front clip of a car
Careful he might do a full build
randy: nevermind ill just put the console in my car😎😎🤣🤣
The glass doesn't slide when it lays on top of rubber... so stick the pads to the lip of the rim. Maybe in line with each spoke. And lay glass on top. The pads are less visible that way and the rim won't scratch the glass.
The office walls need a huge neon illiminate sign. Get it done please!
Obviously the table looks great to randy, hes the smallest one😂
Literally told my class to take a break when i saw the notification
Yo mr.culaton???? U watch illiminate too???
@@manvir3271 hell yeah i do
Mr culaton I’m glad we watch the same channel can you get me a couple point so I can pass the semester it’s at a 68 rn
@@justinthomas-_-4686 same here, I'm at a 27
@@manvir3271 you’ve been watching sonny too much then
Randy: "I don't care what you guys think"
... a second later
"Let me know what you think in the comments below" 😂😂
ahahahahah
🤣🤣
He was referring to his friends. He cares about what we think tho. To help improve the table
Bruh literally told his friends that
what a good way to end the day🔥🔥
Couldnt agree more 💪🏽
Completely professional Bro!!.. Randy's getting hella professional and mature!.. you have turned into one hell of a businessman!
Randy: guys
The chair: nah we ain’t speaking today
You should put a black cloth over the basket so you don’t see the basket and maybe at some led lights so it lights up underneath. Great video!
I ignore other yt notifications but when I see Randy’s yt I click no matter what
I like it it looks like a brake rotor! Great Job Randy!!
Notification gang where y’all attt??🛸🛸
I have two SBC RPF1’s I need to do this for. Was also thinking of a wall mounted reel for a hose too.
Tony: just a little will do the trick
Randy : uses whole bottle of polish
Make a lil box form platform from your left over floor wood to raise the table of the ground.
7:07 just helping the compilation
Edit: 17:03 I didn't know he would fart again😂
Another Edit: 19:40 OHHHHH MYYYY HE DID IT AGAIN💀
RANDY AND ALL OF ILLIMINATE CONGRATS ON 900K I REMEMBER THE DAYS WORKING ON THE S2000 YOU ALL HAVE CAME A LONG WAY AND I LOVE THE CONTENT ALL THE TIME, STAY BLESSED ROAD TO 1MILL
Put Vicks on your shoulder 🤣🤣🤣
Supporting from the Philippines 🇵🇭🇵🇭
I ordered 2 hoodies for m birthday in January but because I live in germany I can expect them to come in march, but I am so fricking excited I can‘t wait anymore, keep up the good work! Love you guysy❤️
The og’s remember when Steph saved the illiminate boys from a rouge tree
Timber bro the tree
Whats her channel?
@@sandercornel she doesn’t have one she posts on andrews channel
@@sandercornel look up Andrew Ibarra
All love from 🇨🇭 and love you vids man keep it up
For some reason, I feel like the engine that they are gonna put in the r-34 is a VR38. Or maybe a 2jz-gte.
They said people wouldn't like it so I doubt its VR38 but could be a 2jz
Imagine it’s a k-series
(joke btw that’s the dumbest swap you can make on a r34)
turyy満 he did say it was going to piss people off and ig your one of them I don’t like it but it’s something new and slow
@@lebuniorruiz6724 they can make decent power but the r34 is a much bigger car than the cars the k series is In, he said it was gonna be fast so maybe an ls7
It’s 2 k series engines
I love your videos so much and you of course no matter what I'm doing I have to click on the video when its up
“We only have so many workers here” while everyone else does nothing, lol
i love the diversity of the vlog content! has some nostalgic vibes
You should put on one of those led lights on the other end of the wheel it'll be pretty sick in my opinion
Looks dope I did this with an old wheel a few years ago and had RGB leds wrapped around the inner barrel
Congrats to Everyone Who is early and who found this Comment”💜.
shit I was late
Why tf do I see u everywhere
@@amer1canalex2 do you?
Who is the girl on ya profile pic shawty bad af 😍
@@joshengelking4383 b by by y
You should fill up the basket with nuts and bolts and put some led lights on the top of the inside rim
I was in the live n Randy revealed the motor but stay tuned he’s gonna piss off the internet with this one 😂
it’s gunna be sick tho
Hey Randy, i made a coffe table out of my old Rays wheel, but for the base i used a large umbrella shade stand, cut the stem to desired height and welded a wheel bearing to the top. So now i can bolt on the wheel with lugs and it spins too! Like a JDM lazy susan haha. Its great! Hope that helps :)
So ready for the Barra reveal !
Love the VS table!!! So jelly I would paint the basket black or get a black one and put some leds in there, would be rad af!!! Love the content always. Be safe keep it up guys!
“My shoulder still hurts” continues to shake wrong arm
Randy I would recommend Fanatec If you want top of the range sim wheel
whos here from the instagram live
K-
You can get a playseat or turnracing rig with a fanatec wheel and pedals. Amazing quality stuff.
I don’t think you care but I was actually born in San Jose and you car a sooo clean you are my inspiration to get a jdm car
Needs the thicker glass and led lighting strip in the barrel. The visual effects from the leds would be pretty dope especially since it's raised off the ground with the basket.
Next video: "So Thomas and I were wrestling and now we got a 1/2 inch glass for the new table."
I like that he took a break off the r34 and gave us a sick diy project keep it up illiminate
when u so early the video isn’t even in his uploads yet
Glad to see tomas back!
You could put a tire on the wheel to give the table a more substantial look
hella stretchy boi
Randy you have a creation mind bro 👨🏻🎓👌🔥
Nice work !!! 👍
the new motor is the Gallo 24, everyone knows that
You could check one of those car themed restaurants since they have wheels for table , if I remember correctly one I went had like a barrel to make it taller then led strips and the power supply running thru inside, make a small hole for the wire to exit and route around the vs kf wheels
Or no leds and a bulb in the middle to make it look kinda divine lmao
Contact Jayztwocents on youtube about that racing sim, I think he lives in california. He is a PC expert and a car enthusiast as well. Check out his channel.
900k LETSSSS GOOO CANT WAIT TILL YOU GET 1M congrats man 🥳🥳
Omg another upload! Love u Randy
You should get 4 pistons and rods , and somehow bolt them to the bottom and hold it up, idk how you could do it but it’s worth a shot and could look pretty sweet
@randy you should put the rubber feet on the rim lip where the glass meets the metal. That way it doesn't make noise when you bump the glass. Also when you do that it will be more secure in holding the glass still. To even further secure it use hot glue to attach the rubber to the glass [use just a small dab] to secure the feet to the glass. And .... lol if you want the table to be a bit higher ... stack the already rim on top of another "half" barrel in the bottom to give it more height. Get vu's new welder to tack the half barrel to the existing rim so the top dosent fall with the glass. Tack inside the barrel so it wont be seen
Super creative table looks amazing
Randy cut the size of the wheel into the top of the black table and place the wheel into it and have the glass on top of the wheel. Later on in life make a base for the wheel using a old hub so the wheel can spin freely. 👍🏼
I would glue some risers on the existing glass and add a bigger glass top . It would be a 2 ties glass table . You could even add a bigger wooden circle glued to the bottom of the wheel for more stability . paint it black of course = )
Gratz on 900k. Lets get that 1 Million!
you can weld some sort of shaft or the bottom of a stool to a wheel spacer, then you attach it to the wheel with lugs
So dope the vlogs outside of the shop are awesome love the vids🔥🔥
Should put some small merch in the basket like a bunch of small stickers and lanyards and key bands! Small details but can see it under the face 💯💯
Imagine if Randy gets a junk car any type with no engine and builds the gaming build inside the car. I’ve seen it on Instagram but it’s sick.
For some reason I'm thinking Sr20. Sr20 swaps in r32s are becoming pretty popular I don't think anyone has done it in a r34 yet
Prop it up on a whole hub assembly (rotor, pads, rock shield) w LCA and upper control arm! 👌🏽👍🏽
Add some led lighting in the basket, it would look good with some colorful light coming from it
Congrats on 900k 🎉 Now on the road to 1mil 🥳
you are my idol randy love you and your frends your videos make all ways my day
boiis he finnaly hit 900k congrats
The fact that he has the best sponsor in the world just makes it possible❤️
Now that you have the basket underneath, you could put a string of led lights under the face and add a little flare to it if you want :)
Congrats on 901K Subscribers ❤
Am I the only one that thinks Tony is underrated?
I really really miss the old illiminate days of all the guys working out of an actual garage.
No fancy equipment, no shop quality tools, just a genuine group of people with a hobby of cars on the side of everyday life.
Not hating on the current state of illiminate, but I just miss the old days. I still notice (and appreciate) their passion for cars but I just don’t personally enjoy the more “industrialized” and “average Joe big TH-camr” feel of illiminate atm and I don’t see it ever returning to what it once was.
I still love this channel and everyone in it (and I will continue watch y’all) but I just really miss the older diy style of illiminate.
Thrustmaster t300, gt omega cockpit, thrustmaster handbrake/sequential, thrustmaster 6 speed shifter, a steering wheel adapter, and a steering wheel of choice, such as like a Nardi steering wheel or vertex
U could maybe paint the outside barrel black and grey to go with the theme of the shop
Just an idea put a spacer and some lugs on the it and mount a semi slick stretched tyre too otherwise it great start to your work coffee table 👌
Tonny needs a company pick up man he rally putting in work from day one ! Make one like the f&f
Dang where do I buy 1 deep dish wheel at. This looks sick
just finished work and i see this, yessirr
Use 2 wheels and 2 baskets then get a glass rectangle and put a wheel on each end to fill that space
you could bolt on a rotor with some spare lug nuts to help complete the look. maybe even repaint a bad caliper and stick it on there.
You should put a light string in there it look hella dope
Use one of those drum base to raise the wheel a little more if you want but sick table tho
Do a table using a RB block with the rods and pistons holding up the glasstop 👍🏻👍🏻👍🏻
Make a stand for it using the lug nut sockets and use some fire lug nuts also would show pass the glass
That fleece Randy always wears looks comfortable 😂 I want one. Make an illiminate fleece!!!!!!
Simple & cheap always a good combo + it looks dope 🔥
I love SIM racing and I know some good stuff you should get you should either get all thrust master parts because they’re really good and could be a little cheaper. But if you want to go all out I would recommend a Fanetic sim rig because they’re super good realistic and overall one of the best brands but they are a little pricey!
Nice table 😁!! Have all the illuminate have there signature, 😉
Lil like led glow inside the wheel or something maybe except idk how you’d route the cables
Randy you should put a mirror and led’s behind the spokes.
Randy wants a wheel setup? Fanatec and a Playseat 👌
nearly at that 1million subs bro a early congratulations from me in new Zealand 🔥🔥💯💯🤙🤙keep up the good work randy dandy🤣🤣🤙🤙🤦♂️
RANDY SHOULD DO A SLEEPER BUILD WITH A 1990-2000 CIVIC - PLEASE MAKE IT HAPPEN
Congrats on 900k boys, keep the grind up 1milli sooon💪💪
Randy is soooo babying that shoulder🤣🤣 love the content tho bro
For the table. If you can get Luke to weld together some pipes to make legs for it, bring a bar or pipe up to the desired height. take a wheel spacer and mount/weld it to a bracket on that upwards pipe. That way you can have it solid center mounted and put dope 326 power lugs on it
900k congrats bro been watching you since 20k subscribers 🤙💙
The table looks great but I wreckon you should use two wheels with a rectangle glass!? That would look dope.💯