Get our newest crawler here - www.banggood.com/custlink/K33v6Tz50c Get the 6ch Radio Transmitter & Receiver We Now Use Here - www.banggood.com/custlink/mD33VJz8zU It's got a built in Gyro, ABS Braking, and a 500M Range For Under $30!
Well. I'm not sure? We have quite a few. They actually have their own room. We have 9 FPV Quads, 4 airplanes, 5 boats, 3 nitro crawlers, HPI Savage, Traxxas TMaxx, Red Cat Volcano. Electric, Emaxx, Slash w/ OBA, Tamiya Lunchbox, 6 WPLs, a Fanyee HEMMTT, a JJRC Osh Kosh, nd a Traxxas Rustler and about 30+ on road cars and trucks. Too many. For what we've spent we could have purchased BIGFOOT!!! Yeah, my kids say im addicted. I dunno?
Used to race motocross, there’s a product called SC1 we used to spray in front of the engine, under fenders, on plastics etc that made mud and dirt slide right off in the wash process. Would be super useful on bodies/undercarriage, places you might not want wd40. Plus it’s the best smelling thing on the planet
I'm just now looking at getting into this fascinating hobby. I mean I had a few RC vehicles when I was younger, but nothing of this sort. The closest was a monster truck that actually had both 2 and 4WD, which to me was mind-boggling at the time. Lol Anyway, just wanted to say thanks for the tips, and I'll be watching many more of your videos now!
Favorite tires for me are Hyrax by far, I live in southern California in the desert. I also love the proline BFGs Krawlers, RC4WD Patagonia and surprisingly I really like the Duratrax Deep Woods but Hyrax are my top.
I couldn't have said it better! Literally I run hyrax on all my crawlers. If it's not hyrax it's deep woods... both are great all around grip. Best tires period!
I'm on the east coast of the US and I love using pit bull rock beast and jconcepts landmines. They're great in the mud, water and conform around rocks extremely well
Love it Ive started a channel, go carts quad bikes to my dream car c63amg, this info helped lots, haven’t put out a full edited video yet but it’s coming, yeah the boys, full send, I’ve been very inspired by your channel, thanks for the into my bro
Here's some great all around tires. Proline TSL Super Swampers XL and Pitbull Rock Beast. Both tires work great in temperate forest climates to deserts and everything in between.
I’m from the UK and as I have a lighter crawler, i use fastrax rocko 1.9s. They are really cheap and soft, and grip really well and plough through mud!
Sup hero. I love in the bluegrass state. Yes Bluegrass Kentucky. I live by the Ohio river in the eastern part ... I'm a crawler by birth ,but I'm wondering into the drift car world. Great vids.
WD-40 has a degreaser in it. so it can be bad for gear grease and bearing grease. It can break it down over time. PTFE Silicone spray is a better alternative, and a plus is the driveshaft will thank you for the PTFE Silicone.
In my opinion pit bull tires are the best crawling tires out there. Well after breaking them in. Were great new but on another level after break in. My scx10 lll is a goat! It also has brass front amd rear bumper mounts (talking between the frame rails), front brass portal covers unner and outer, rear brass portal covers, and steel rock sliders. Removed the interear (it weighes 1 lb), lastly aluminum beadlock wheels. Going to put a VW Bug body in it to lower CG. Thats it. Shes a tank. Stock electronics. Never overheats. Like you say. Its a crawler not a speed buggy. Ill open it up to get over a rock, but 1, or 2 mph the rest of the time.
I use Pro-line 1.9 CLASS 1 BFG KM3 PREDATOR tires😃. They look super Scale and they also grib good as they are Predator Class 1 tires….. I’am from Denmark🇩🇰🇩🇰 Sherpa CR3.4 PRO - Toyota Land Cruiser LC70 Orange with rust…👌🏾
nice tips. Tire do make the best performace gain for sure. I like the bfg km3's from proline racing, or the super swampers. Both in the XL size. 4.75. I am in nor cali. Much love Richie.
Here's a video breakdown to make it easier to find what you want to know. 1:05 Wrong tires 3:14 Too little, or too much weight 6:15 Overpowering your crawler 7:58 Not waterproofing enough 11:26 Not cleaning or maintaining your crawler
I live in Minnesota in the US the super Swampers and boggers are optimal I've got bfgoodrich crawler tires on mine rn but the winter here is super cold and I'm still trying tires for the seasons
Hyrax 1.9 & 2.2 with Dual stage foam. I also have my vision of air down sand times which are 2.2 Hyrax with 1.9 singe stage foam on my 1:10 scale crawler.
I got my duratrax deep woods out here in the desert of El Paso Texas and las cruces New Mexico and I can’t complain! Goes up the hard dirt mounds. Grips the soft dirt. My gen 8 has treal outer brass portal and on the front I have the C mounts brass I bought the front inner portal and the axle but it would be way too much weight with an all brass axle. I was going for a F60/R40 weight ratio. Great video man good advice hey everyone reading this if you are in the area let’s go crawl!
Just got our first crawler.. maybe it's a little cheap. HSP rock hammer. Wondering, why won't it roll, after release of throttle, it just stops. Out of box, I then trimmed throttle and it started to roll. Then I charged the batt(as I tested for 3min on delivered batt charge) and no matter what I do it won't free roll upon release of throttle. Faulty, or just a noob . ?
Do you have any tips on what software you use for editing? I’m looking back at my commentary and it’s pretty Amateur and cheesy? Any tips? I’m the more talk behind the camera and film type
I've tried many different compounds and brands of RC crawler tires. The conclusion I've come to is that my favorites would be the original 1.9 ripsaws, dick cepek mud countrys, Pro-Line super swamper TSL 1.9, and the stock Axial SCX10 2 BFGs
I still live the axial ripsaws white dot (ultra soft) as well I run the 1.9 rc4wd super swampers. I live in western Washington, wet, slick rock, a little of everything. I run very heavy trucks, all low weight of coarse. I think my scx10 is around 13 lbs. Will crawl anything and became boring, then I did a 1.9 ascended ford 100. And is a bit lighter but outfitted similarly. I run tekin hand wound 35 and 55 turn motors, 3-4s
Well in south africa climate makes a huge difference we do mostly extreme scale crawlers so quite heavy but very capable with narrow rc4wd rocky bois But I prefer my dirt crawling with wet rock capability but most of us run high end electronics
I have three crawler first was scx10 with clod buster body next is trx4 blazer then I got trx6 snap-on hauler and I run spectrum DX6R DX5C DX4C dX2E but I still don't play in water because I have a GT power with built-in esc and Bluetooth lights engine sound Vibration
Hello I’m just wondering do you know a cheap good quality I’m Rockcrawler because I’m trying to get into like Ed rock Crawling in that but like I live in Australia
I have a redcat Gen 8 scout and I thought the factory tires were decent and good all around tires…same with the stock tires on the TRX4. Sure there’s better ones for specific needs but they’re good overall purpose tires!
Madrid Spain 🇪🇸 usually likes to run canyon tyres for crawling. Here everything is very dry. Dry stone dry earth dry sand dry dust. Up in mountain areas you might find water zones, but all around canyon
Have you heard any buzz about a soon coming Axe Edition V2 of the Redcat Racing Gen 8 Axe Edition? I called them yesterday and inquired about why nobody appears to have any Gen 8 Axe Edition kits. They informed me I can get one from them. When I asked if they're working on a new model of the axe edition, he expressed he can't say yes or no, but he also hinted I may want to wait a little because their might be a V2 coming soon with huge improvements. I tried really hard to get more information on it, but he was only allowed to hunt to the strong possibility of it coming very soon, leaving off by saying to me the Axe Edition is a great RC truck I'll be very happy with, but also stating I'd be very happy with either truck (either being the Axe V1 or the Axe V2). I'm dying to know more. BTW, I also asked if said vehicle was about to be released, would it be more expensive or the same price as the current Axe Edition, and the answer was "The same price".
News normally exaggerates but not in this case, we have had quite a bit of flooding, Matlock where our Daughter lives copped it worse than I’ve ever seen it. Both the Derwent and Trent and the river Don burst their banks, it’s eased now but on Saturday past which is a good week after the worst I went through some bad flooding near Rowsley just off Chatsworth Grounds. The ground is water logged so we don’t need anymore bad rains or it will kick off again. We live halfway up a steep hill so we’re good. Got to feel it for those who aren’t. As fortunate. They will keep chucking houses up on land that’s known to flood, Dave x
Great tips, and can testify wd40 makes a world of difference in the very long term as well, I have a traxxas tmax that I noticed parts were starting to rust and bind up the first couple years owning it, since then I always use wd40 when I replace or fix it, and that alone pretty much keeps everything in good shape. It’s been neglected for years yet everything’s still all free and moving fine, would have been junk if I hadn’t adopted that practice.
I love my Traxxas tmax I've had it for years but it's just sat around the last couple years. I'll never let it go. It's time to slow down and get a rock crawler now.
@@276rclife6 Yea man it’s fun, plus you don’t break parts nearly as bad. I got a whole course setup in my back woods now, I took it camping with me and my brother has a summit he brought, we went on a hike with them crawling through the woods and stuff, stuff I’d never do with my tmaxx, def a great addition to my rc stuff.
@@travispratt6327 cool..I've got close to 10 acres of land to play on..just gotta get to work on it..plus being new to crawling it's just me for now..lol
I wish I'd seen this video before buying a crawler in the first place... I bought a Redcat Racing Everest-10. It's been a journey learning literally everything on my own. Thanks internet. The owner's manual was actually quite useful considering I didn't know my ass from an ESC at the time. There's lots of super obscure things too like "hey, this one part is completely universal on every crawler"... Is it? Well, shit! I wish I'd know that before buying the one direct from Redcat Racing because I could get one half price elsewhere. I added dual steering. I'm disappointed that the "3ch radio" that shipped in the crawler doesn't actually use channel 3. Come on!!! Now I gotta spend like $500 on a 6 channel radio to do all the shit I want to do (like dual motors some day maybe)... Anyway... I don't consider any of the money I spent on my little toy wasted because it's all usable on other RCs. Even parts I got that aren't compatible (like the steel pinions and spur gears I ordered that won't work... I can keep them for future RC projects). Anyway... I named my RC. Its name is Creepy as in Creepy Crawley. So... right now Creepy is $400 if you count parts and upgrades. I really like my 1.9" tires but the original 2.2" that shipped are now waterproofed so my new "mud set" will be the original Redcat Racing 2.2" and my "rock set" will be the Injora 120mm I've mostly taken my RC through north-central Pennylvania clay-mud and let me tell ya... fall through spring... it doesn't matter what tread your tiny tires have. You'll get caked over and after a few feet of puddle or mud pit you're traction surface is just mud on mud. I believe (I don't have the tires handy right now) the text on the side of my Injora set of tires says "Rocks Tyre Super Swamper". They're a little softer than the Redcat originals but they're narrower and aren't enough to float the whole crawler where the original 2.2 were big enough to float over deep mud. Also... the Injora tires have a metal wheel and there's less thread to engage with the axles (meaning you gotta be double sure you put loctite on when you swap wheels). Total aside... I'm thinking that I should maybe get like monster jam tires for real mud crawling. That seems like a tread pattern that would actually shed the caked on mud. If anyone has experience with a monster truck V pattern in 1/10th scale in sticky clay mud... let me know if it's good. Or bad. I really want to know.
I have had good luck with club5 racing for parts for the redcat. I have the gen 8 and the g8 axe love them both. Great channel thanks and keep crawling.
@@276rclife6 I have both its definitely worth the money for the axe the brushless motor and 6ch controller are far superior. I put a fusion in the v2 and ended up buying the flysky controller as well. HAPPY CRAWLING
@@276rclife6 2s 7600mah 35c will give you 6 to 7 hrs of trail time. I use 2s 5000mha 25c gives 4hrs and I bring an extra just in case. Venom or Lectron pro. Steer clear of cheap batteries get a good charger and a lipo bag to store and charge them in.
had my 2 trx4's for 4 years, when i first got them i checked out all diffs and lubed up all parts, since then i've not touched them, no issues at all. think there is people who clean and wash, re lube to much in my opinion.
I've got two more mistakes/fixes for you. Never...Ever run your Traxxas TRX4 RC before you pull it all down, regresse it with marine grease or the white lithium stuff, minimum, This includes all moving parts, including the transmission. Because Traxxas in their infinite wisdom and cheapness (rofl) use the shittiest grease or don't even bother to use grease at all. I can't stress "SHITTY" enough here. Tighten the 11 tooth gear too, mine wasn't tight and it chewed the plastic gear...I could go on for another hour...sigh! Your spot on. Great video. Use Inox in Australia, WD-40 is crap. And G'day from Australia.
Not sure if it has been mentioned before but everyone should own a small hair dryer wd40 and synthetic grease. I shower my cars after every run than use the hair dryer to get the water out of the areas that would normally settle hang drying
![[Full] 4 ต่อ 4 Celebrity EP.910 | 22 ก.ย. 67 | one31](http://i.ytimg.com/vi/4TR3MVpOiw8/mqdefault.jpg)
Get our newest crawler here - www.banggood.com/custlink/K33v6Tz50c Get the 6ch Radio Transmitter & Receiver We Now Use Here - www.banggood.com/custlink/mD33VJz8zU It's got a built in Gyro, ABS Braking, and a 500M Range For Under $30!
Bro give buy link of rc rock crawler rear wheel gears plzzzz
It will be interesting what full size vehicle manufacturers of EV's, for off road Utes design as waterproof.
Dielectric grease to keep water out of bullet connections. "Dielectric," means electrically resistive to conduction.
you missed 1 very important fact. that is. you can never have enough crawlers/trail trucks
very true, I have 2 but a large collection of go fast stuff so I know what you mean
Andy Smith sooooo true I just got a new one today 😂
Well. I'm not sure? We have quite a few.
They actually have their own room.
We have 9 FPV Quads, 4 airplanes, 5 boats, 3 nitro crawlers, HPI Savage, Traxxas TMaxx, Red Cat Volcano.
Electric, Emaxx, Slash w/ OBA, Tamiya Lunchbox, 6 WPLs, a Fanyee HEMMTT, a JJRC Osh Kosh, nd a Traxxas Rustler and about 30+ on road cars and trucks.
Too many. For what we've spent we could have purchased BIGFOOT!!!
Yeah, my kids say im addicted. I dunno?
Used to race motocross, there’s a product called SC1 we used to spray in front of the engine, under fenders, on plastics etc that made mud and dirt slide right off in the wash process. Would be super useful on bodies/undercarriage, places you might not want wd40. Plus it’s the best smelling thing on the planet
They should make a deodorant that smells like SC1
Awesome tips! Thank you so much. As a returning rc'er after 20 years, this was very helpful.
You are so welcome!
I'm just now looking at getting into this fascinating hobby. I mean I had a few RC vehicles when I was younger, but nothing of this sort. The closest was a monster truck that actually had both 2 and 4WD, which to me was mind-boggling at the time. Lol Anyway, just wanted to say thanks for the tips, and I'll be watching many more of your videos now!
Hey did you ever get you a truck
Waterproofing is underrated and should be done more often to all the sensitive components.
Favorite tires for me are Hyrax by far, I live in southern California in the desert. I also love the proline BFGs Krawlers, RC4WD Patagonia and surprisingly I really like the Duratrax Deep Woods but Hyrax are my top.
I couldn't have said it better! Literally I run hyrax on all my crawlers. If it's not hyrax it's deep woods... both are great all around grip. Best tires period!
@@natereilly5376 Yup still my favorite. I run them on my trx4 with dual stage foams and I run the bigger 2.2 hyrax on my bomber.
I'm on the east coast of the US and I love using pit bull rock beast and jconcepts landmines. They're great in the mud, water and conform around rocks extremely well
On my Redcat Everest I just modified and weighted the original tires and it worked.
Love it Ive started a channel, go carts quad bikes to my dream car c63amg, this info helped lots, haven’t put out a full edited video yet but it’s coming, yeah the boys, full send, I’ve been very inspired by your channel, thanks for the into my bro
Here's some great all around tires. Proline TSL Super Swampers XL and Pitbull Rock Beast. Both tires work great in temperate forest climates to deserts and everything in between.
#1 just to clarify @1:52 East vs West coasts in the states. Not: "Climate change," Mate. Just geological topography. Cheers.
No he’s just talking climate not topography 🤣. Meaning when tires get cold they act differently than they would when they’re hot
I’m from the UK and as I have a lighter crawler, i use fastrax rocko 1.9s. They are really cheap and soft, and grip really well and plough through mud!
I watched a youtube video to modify or trim the stock trx 4 tires on my defender. I was truly happy with the results. Night and day difference.
Thanks for the tip. Cause am buying a Crawlers this week. Live in Central Iowa
Sup hero. I love in the bluegrass state. Yes Bluegrass Kentucky. I live by the Ohio river in the eastern part ... I'm a crawler by birth ,but I'm wondering into the drift car world. Great vids.
I'm between the Flat Iron XL and the Hyrax, both proline tires, with dual stage foams.
Happy with the stock canyon trail over here in the uk, thanks for your info.
Great video man just great. Tip if you want to run through water make sure you have an air compressor or a can of air.
Good tip!
WD-40 has a degreaser in it. so it can be bad for gear grease and bearing grease. It can break it down over time. PTFE Silicone spray is a better alternative, and a plus is the driveshaft will thank you for the PTFE Silicone.
Thanks, fully aware of that
Super Swampers in Ohio & I go to PA to crawl sometimes 👊🏾😎
RC4WD 1.9 IROKS are my go to livin here in Tennessee.
tires i use are the Goodyear Wrangler Duratrac both in 1.9 x 3.75 on my Trail Finder 2 and 1.9 x 4.75 on my SCX 10.3
In my opinion pit bull tires are the best crawling tires out there. Well after breaking them in. Were great new but on another level after break in. My scx10 lll is a goat! It also has brass front amd rear bumper mounts (talking between the frame rails), front brass portal covers unner and outer, rear brass portal covers, and steel rock sliders. Removed the interear (it weighes 1 lb), lastly aluminum beadlock wheels. Going to put a VW Bug body in it to lower CG. Thats it. Shes a tank. Stock electronics. Never overheats. Like you say. Its a crawler not a speed buggy. Ill open it up to get over a rock, but 1, or 2 mph the rest of the time.
I use Pro-line 1.9 CLASS 1 BFG KM3 PREDATOR tires😃. They look super Scale and they also grib good as they are Predator Class 1 tires…..
I’am from Denmark🇩🇰🇩🇰
Sherpa CR3.4 PRO - Toyota Land Cruiser LC70 Orange with rust…👌🏾
nice tips. Tire do make the best performace gain for sure. I like the bfg km3's from proline racing, or the super swampers. Both in the XL size. 4.75. I am in nor cali. Much love Richie.
Hiya whereabouts in Nor cal
@@DriftomaniacsRC Tahoe.
Very informative thank u I am new to crawling
Love your videos mate. I hope you keep makeng em. Much appreciate it.
My favs are sipped Trx4 stockers, klm-r, Hyrax. All three work outstanding in New Mexico terrain!!!
All excellent points! Most if not all of them I learned the hard way 🤣
Here's a video breakdown to make it easier to find what you want to know.
1:05 Wrong tires
3:14 Too little, or too much weight
6:15 Overpowering your crawler
7:58 Not waterproofing enough
11:26 Not cleaning or maintaining your crawler
Bonus Tip. 11:30 Improper tire placement. Front left and rear right need to be swapped. :)
Amazing tips Rich, you are spot on with everything , especially the tyres and wheels, fantastic video bro 👍😁👍
Nice tips Rich, we actually just got a couple of crawlers ourselves!
I live in Minnesota in the US the super Swampers and boggers are optimal I've got bfgoodrich crawler tires on mine rn but the winter here is super cold and I'm still trying tires for the seasons
I’m in Minnesota also
Pitt Bull Rock Beasts seem to work well in most all conditions. Work really good in cold. Rubber stays soft. I live in Michigan
I use them on my Element Enduro and Gatekeeper
Hyrax 1.9 & 2.2 with Dual stage foam. I also have my vision of air down sand times which are 2.2 Hyrax with 1.9 singe stage foam on my 1:10 scale crawler.
i like the 1.9 mudslingers for my redcat gen 8 i live in Colorado USA there good for snow wet rocks mud and sand
Thank you, great info, and I like your attitude and delivery.
New subscriber.
Best tires are the Ruptures by JDConcepts or Proline Hydrax
Ontario, Canada
Thank you .
You rock for this video.
love the baja claw ttc micky tompson mounted on metal weighted rims. i live in quebec but they aren't good in freezing temperature
Love your videos. There so informative. Keep up with the great work with the channel
Well done Rich!
I got my duratrax deep woods out here in the desert of El Paso Texas and las cruces New Mexico and I can’t complain! Goes up the hard dirt mounds. Grips the soft dirt. My gen 8 has treal outer brass portal and on the front I have the C mounts brass I bought the front inner portal and the axle but it would be way too much weight with an all brass axle. I was going for a F60/R40 weight ratio. Great video man good advice hey everyone reading this if you are in the area let’s go crawl!
Lol the real TRX4 with the 2 speed trans is a godsend. I can crawl, then flip a switch and bash. But you need to overpower it 😆
ProLine Hyrax. Amazing tires. I live in the desert. Las Vegas.
I miss Vegas a lot I was thinking about buying house out there this year
Most of these tips apply to full size 4x4s as well.
Cool video!
When you test for it being waterproof, you probably can only be wrong once.
That, Brian. Gets comment of the day award! I am in the garage laughing like crazy. The world needs humor right now!
Proline hyrax are the absolute best I would say anywhere but I live in Texas
Treal, offers brass everything for gen 8
South west England and I use 1.9 gmade mt1903 tyres, great.
I'm out in Central California and run 1.9 TRX-4 tires stretched over 2.2 rims with 2.2 stadium truck foams.
Just got our first crawler.. maybe it's a little cheap. HSP rock hammer.
Wondering, why won't it roll, after release of throttle, it just stops.
Out of box, I then trimmed throttle and it started to roll. Then I charged the batt(as I tested for 3min on delivered batt charge) and no matter what I do it won't free roll upon release of throttle.
Faulty, or just a noob . ?
Do you have any tips on what software you use for editing? I’m looking back at my commentary and it’s pretty Amateur and cheesy? Any tips? I’m the more talk behind the camera and film type
I got some Proline Hyrax G8 today, I live in Sydney Australia
Clear nail polish is a super cheep conformal coating alternative. What kind of brushed motor would be a good upgrade to the Gen 8 I dont like the 17t?
I ended up going with a Holmes Hobbies Crawlmaster Pro 12t and its a torq monster.
I've tried many different compounds and brands of RC crawler tires. The conclusion I've come to is that my favorites would be the original 1.9 ripsaws, dick cepek mud countrys, Pro-Line super swamper TSL 1.9, and the stock Axial SCX10 2 BFGs
Proline makes the same BFG krawlers as axial but are way better than axials.
@@stpbasss3773 hell yeah awesome
ripsaws rule
I just subscribed great channel I'm making my own little videos too thanks for the Inspiration
Over here on the coast of Washington state I run 1.9 proline boggers on my scx 10 ii while bashing around, But run 1.9 hyrax if I go crawling.
What is the white car on the far right? I’m looking for a buggy utv type car. I like that one.
Very helpful video. I'm thinking of getting into crawling.
Do it! You won't regret it. Your wallet may. Lol✌
@@caddydaddy53ify Did it, got two trx 4's bronco and defender.
@Peter Alexander I wish.
Brilliant video 👍
Kind regards
James
Fae
Scotland 🏴
Going hunting for haggis next week up Glen coe 👍😀
I have a Gen 8 with factory electronics it's been in water to the roof
Tip #6 Make sure your tires are on the correct way. They often grip better in one direction. haha.
I still live the axial ripsaws white dot (ultra soft) as well I run the 1.9 rc4wd super swampers. I live in western Washington, wet, slick rock, a little of everything. I run very heavy trucks, all low weight of coarse. I think my scx10 is around 13 lbs. Will crawl anything and became boring, then I did a 1.9 ascended ford 100. And is a bit lighter but outfitted similarly. I run tekin hand wound 35 and 55 turn motors, 3-4s
I live on the north coast of Mexico tijuana and I use canyon trail 1.9 and they work 👍👍👍
Well in south africa climate makes a huge difference we do mostly extreme scale crawlers so quite heavy but very capable with narrow rc4wd rocky bois
But I prefer my dirt crawling with wet rock capability but most of us run high end electronics
I have three crawler first was scx10 with clod buster body next is trx4 blazer then I got trx6 snap-on hauler and I run spectrum DX6R DX5C DX4C dX2E but I still don't play in water because I have a GT power with built-in esc and Bluetooth lights engine sound Vibration
Vancouver Island, BC Canada. TRX-4 running Proline Hyrax on Dual stage foam on RC4WD Fuel Zephyr.
Cut & siped 2.2 mudslinger 2 XL 's im in alabama we got slick rocks and even slicker mud !
I run RC4WD stuff, never had a problem. Even the 1.9 Baja claws keep my 9lb Vaterra planted.
Hello I’m just wondering do you know a cheap good quality I’m Rockcrawler because I’m trying to get into like Ed rock Crawling in that but like I live in Australia
Redcat everet 10 would be my starting point. Cheap, capable and lots of mods out there for it.
Thank you
Fs racing rock crawler, best value as it is a copy of the scx10 but with many higher spec parts....
1.9 and 2.2 is just wheel size there are lots of different tire sizes
In the midwest the Deep Woods tires by Duratrax are my favorite. They are also cheap.
I have a redcat Gen 8 scout and I thought the factory tires were decent and good all around tires…same with the stock tires on the TRX4.
Sure there’s better ones for specific needs but they’re good overall purpose tires!
Madrid Spain 🇪🇸 usually likes to run canyon tyres for crawling. Here everything is very dry. Dry stone dry earth dry sand dry dust. Up in mountain areas you might find water zones, but all around canyon
Have you heard any buzz about a soon coming Axe Edition V2 of the Redcat Racing Gen 8 Axe Edition?
I called them yesterday and inquired about why nobody appears to have any Gen 8 Axe Edition kits. They informed me I can get one from them. When I asked if they're working on a new model of the axe edition, he expressed he can't say yes or no, but he also hinted I may want to wait a little because their might be a V2 coming soon with huge improvements. I tried really hard to get more information on it, but he was only allowed to hunt to the strong possibility of it coming very soon, leaving off by saying to me the Axe Edition is a great RC truck I'll be very happy with, but also stating I'd be very happy with either truck (either being the Axe V1 or the Axe V2). I'm dying to know more.
BTW, I also asked if said vehicle was about to be released, would it be more expensive or the same price as the current Axe Edition, and the answer was "The same price".
U have a great intro love it
Richard my good friend, your my bestest new mate. Love from North Nottinghamshire, South Derbyshire, xxxxxxx
Great, and much needed advice x
David how's the weather? Has the rain eased? It looked awful on the Beebs website.
News normally exaggerates but not in this case, we have had quite a bit of flooding, Matlock where our Daughter lives copped it worse than I’ve ever seen it. Both the Derwent and Trent and the river Don burst their banks, it’s eased now but on Saturday past which is a good week after the worst I went through some bad flooding near Rowsley just off Chatsworth Grounds. The ground is water logged so we don’t need anymore bad rains or it will kick off again. We live halfway up a steep hill so we’re good. Got to feel it for those who aren’t. As fortunate.
They will keep chucking houses up on land that’s known to flood, Dave x
Well the SCX10 1 came with proline flat iron 1.9 so I haven't had a need to change them.
Great tips, and can testify wd40 makes a world of difference in the very long term as well, I have a traxxas tmax that I noticed parts were starting to rust and bind up the first couple years owning it, since then I always use wd40 when I replace or fix it, and that alone pretty much keeps everything in good shape. It’s been neglected for years yet everything’s still all free and moving fine, would have been junk if I hadn’t adopted that practice.
I love my Traxxas tmax I've had it for years but it's just sat around the last couple years. I'll never let it go. It's time to slow down and get a rock crawler now.
@@276rclife6 That’s what I did, I got an Everest 10, pretty happy with it.
@@travispratt6327 cool..is crawling as fun as it looks? I'm about to order the new gen8v2
@@276rclife6 Yea man it’s fun, plus you don’t break parts nearly as bad. I got a whole course setup in my back woods now, I took it camping with me and my brother has a summit he brought, we went on a hike with them crawling through the woods and stuff, stuff I’d never do with my tmaxx, def a great addition to my rc stuff.
@@travispratt6327 cool..I've got close to 10 acres of land to play on..just gotta get to work on it..plus being new to crawling it's just me for now..lol
My favorite tires are mud slingers
I wish I'd seen this video before buying a crawler in the first place... I bought a Redcat Racing Everest-10. It's been a journey learning literally everything on my own. Thanks internet. The owner's manual was actually quite useful considering I didn't know my ass from an ESC at the time. There's lots of super obscure things too like "hey, this one part is completely universal on every crawler"... Is it? Well, shit! I wish I'd know that before buying the one direct from Redcat Racing because I could get one half price elsewhere.
I added dual steering. I'm disappointed that the "3ch radio" that shipped in the crawler doesn't actually use channel 3. Come on!!! Now I gotta spend like $500 on a 6 channel radio to do all the shit I want to do (like dual motors some day maybe)... Anyway... I don't consider any of the money I spent on my little toy wasted because it's all usable on other RCs. Even parts I got that aren't compatible (like the steel pinions and spur gears I ordered that won't work... I can keep them for future RC projects).
Anyway... I named my RC. Its name is Creepy as in Creepy Crawley. So... right now Creepy is $400 if you count parts and upgrades. I really like my 1.9" tires but the original 2.2" that shipped are now waterproofed so my new "mud set" will be the original Redcat Racing 2.2" and my "rock set" will be the Injora 120mm I've mostly taken my RC through north-central Pennylvania clay-mud and let me tell ya... fall through spring... it doesn't matter what tread your tiny tires have. You'll get caked over and after a few feet of puddle or mud pit you're traction surface is just mud on mud.
I believe (I don't have the tires handy right now) the text on the side of my Injora set of tires says "Rocks Tyre Super Swamper". They're a little softer than the Redcat originals but they're narrower and aren't enough to float the whole crawler where the original 2.2 were big enough to float over deep mud. Also... the Injora tires have a metal wheel and there's less thread to engage with the axles (meaning you gotta be double sure you put loctite on when you swap wheels).
Total aside... I'm thinking that I should maybe get like monster jam tires for real mud crawling. That seems like a tread pattern that would actually shed the caked on mud. If anyone has experience with a monster truck V pattern in 1/10th scale in sticky clay mud... let me know if it's good. Or bad. I really want to know.
Rc4wd Goodyear MTR 1.9 4.75 NC
North Central US river rock and sand Hyrax and Baja Claw so far
I run louise champs on my 2 element trucks and in south africa run rock and sand mud and no problems for me
First lack of maintenance!
Proline Hyrax G8 in Utah
I have had good luck with club5 racing for parts for the redcat. I have the gen 8 and the g8 axe love them both. Great channel thanks and keep crawling.
I'm on the fence on the gen8 axe over the v2 any thoughts. Is it worth the extra $ for the axe or is the V2 good enough
@@276rclife6 I have both its definitely worth the money for the axe the brushless motor and 6ch controller are far superior. I put a fusion in the v2 and ended up buying the flysky controller as well. HAPPY CRAWLING
@@caddydaddy53ify thanks for the info..I'm new to crawling and don't want to waste my money..what battery's you use
@@276rclife6 2s 7600mah 35c will give you 6 to 7 hrs of trail time. I use 2s 5000mha 25c gives 4hrs and I bring an extra just in case. Venom or Lectron pro. Steer clear of cheap batteries get a good charger and a lipo bag to store and charge them in.
@@caddydaddy53ify ok thanks
Merci stai tres pratic... jle savai pas qu'il y avais 2 grandeur de pneu
had my 2 trx4's for 4 years, when i first got them i checked out all diffs and lubed up all parts, since then i've not touched them, no issues at all.
think there is people who clean and wash, re lube to much in my opinion.
How can we reduce body roll without having to take off accessories or counter the weight?
Rear sway bar. One of my first upgrades. It keeps both front tires on the ground on steep climbs. Not as effective with portal axles.
@@RTmadnesstoo where can you find sway bars?
But that TRX-4 spare tire looks so cool :)
Put it back on when it's sitting on the shelf. Put it in you pocket when the going gets steep.
4:10 I just took the spare wheel and placed it on the hood 👍🏼
I've got two more mistakes/fixes for you. Never...Ever run your Traxxas TRX4 RC before you pull it all down, regresse it with marine grease or the white lithium stuff, minimum, This includes all moving parts, including the transmission. Because Traxxas in their infinite wisdom and cheapness (rofl) use the shittiest grease or don't even bother to use grease at all. I can't stress "SHITTY" enough here. Tighten the 11 tooth gear too, mine wasn't tight and it chewed the plastic gear...I could go on for another hour...sigh! Your spot on. Great video. Use Inox in Australia, WD-40 is crap. And G'day from Australia.
Any recommendations on a good starting crawler for a newbie?
TRX4 Sport is probably one of my top 3. Second place is a Axial SCX 10 II and third is Redcat Gen 8 Axe Edition.
Usually what I go by is if they say it’s waterproof I see that more like splash proof so things like water drops
Not sure if it has been mentioned before but everyone should own a small hair dryer wd40 and synthetic grease. I shower my cars after every run than use the hair dryer to get the water out of the areas that would normally settle hang drying
*Cool*