Just ordered my H5 RGB from Amazon. My first build. Thank you for the upload. My heart is saying air cooled but my mind is telling me liquid cooling. Beautifully done and thanks again for the video.
Yo! The two fans are connected via a +5V ARGB connector, so they can be connected to the motherboard. If the connector is removed, you can also connect to the NZXT Controller. In conclusion, both options are possible.🖤💜
I have a question about the two rgb fans that came with the case and the extra rgb fan that you bought. How many pins and volts are the two fans rgb fans that came with the case and how many pins and volts are the extra fans that you bought?
Hi! The two front fans included with the case can be connected to the NZXT controller, or you can use the attached ARGB +5V 3-pin connector. The extra purchased fan must be connected to the NZXT controller, as it's the NZXT connector type. So if you purchase additional fans, you have to use the NZXT controller. Hope this helps💜🖤
@@PC_SNAP Hello! I have seen somehwhere that the nzxt controller only supports 4 pins and the two front fans are only 3 pins so I was wondering if the controller supports both 5V and 12V and if I could connect the 3-pin fans to the 4-pin controller?
I looked at the NZXT controller, and it uses a 4-pin configuration. However, it doesn't specify whether it operates at 5V or 12V. My guess is that it might use +5V, similar to ARGB. Since compatibility with the mainboard header seems unlikely, that detail might not be crucial. The front fans have an ARGB 3-pin connector at the NZXT end, making them compatible with the mainboard :)
Thank you so much! The Ryzen 7 needs the AM5 socket like a B650 or X670 motherboard. Depending on the CPU, you choose the appropriate VCORE and heatsink.💜🖤
That's one mean looking build! I'm planning to use the same parts but in white. Can you please tell me if the h5 flow rgb cabinet comes with a fan controller or not? Also if those fans are pwm controlled or not? I was going for the regular h5 flow but it doesn't come with fans and I'd have to buy fans anyway so I'm thinking to increase my budget for the rgb variant. Also, subbed for more quality content!
Thank you so much! RGB and PWM controllers are not included in the case. However, there are two front 140mm fans and one bottom 120mm fan connected through a PWM splitter, and they are connected using a +5V ARGB gender cable. Using an NZXT motherboard might make it easier but you can also use other options without any problems. In the video, the Kraken AIO has the RGB controller with 3 nodes, so the rear fan to it together. The remaining fans were connected to the NZXT N7 Z790 motherboard directly and controlled all fans' RGB and PWM through NZXT CAM. I hope this helps 💜🖤
@@PC_SNAP Thanks for the reply mate. This is just the answer I was looking for. I'm also planning to get a 240mm kraken so I believe I'll be able to control all the fans with it's controller.
Check 02:39, I used the controller included with the Kraken Elite for the rear cooling fan and radiator fans. The front fans have an attached ARGB +5V connector, so I connected it to the motherboard.
I wish you had talked through the assembly! I have the same case and cooler, but I'm so confused with the cabling.Are the front and rear fans hooked direct to the motherboard? If I buy NZXT RGB and Fan Controller, can I connect all the fans, including the cooler fans to that?
I answered a question from another subscriber, so I'll tell you the same answer here! ===================================================================== RGB and PWM controllers are not included in the case. However, there are two front 140mm fans and one bottom 120mm fan connected through a PWM splitter, and they are connected using a +5V ARGB gender cable. Using an NZXT motherboard might make it easier but you can also use other options without any problems. In the video, the Kraken AIO has the RGB controller with 3 nodes, so the rear fan to it together. The remaining fans were connected to the NZXT N7 Z790 motherboard directly and controlled all fans' RGB and PWM through NZXT CAM.
Just ordered my H5 RGB from Amazon. My first build. Thank you for the upload. My heart is saying air cooled but my mind is telling me liquid cooling. Beautifully done and thanks again for the video.
The filming and editing is as clean as the build itself.
Oh, thank you so much!
I hope you enjoyed watching this 💜🖤
So satisfying to watch.
Thank you !
Thank you so much!
I'm so glad you liked it💜🖤
리뷰 잘봤습니다!
항상 응원합니당!
오호~ 댓글도 달아주시고 정말 감사합니다 💜🖤
Nice build! 😮
Thank you so much, my friend💜🖤
@@PC_SNAP ,🤜🤛
이건 그냥 빌드가 아니라 빌드아트네요!!
오호~ 감사합니다. 💜🖤
영상이 너무나 깔끔해서 마음이 편안해집니다.😂😂
Can you detail more about the front fans connectors? Dirextly to the mobo or you need to use a nzxt rgb hub?
Yo! The two fans are connected via a +5V ARGB connector, so they can be connected to the motherboard. If the connector is removed, you can also connect to the NZXT Controller. In conclusion, both options are possible.🖤💜
@@PC_SNAP oh, nice. So i only need one rgb header on the mobo to power both fans led? Btw, its a 3 pin rgb header, right?
Does the 2 nylon-braided sleeves from the AIO put pressure on the Graphics Card?
The NZXT Kraken tubes are quite flexible, so you don't need to worry about it!
@@PC_SNAP thank you❤
beautiful case❤
Oh, thanks for the comment💜🖤
What are the parameters of the radiator cooler? I'm making my first oc build and getting this case but I don't know if the cooler I chose will fit.
05:40 Check the thermals part in the video!
I have a question about the two rgb fans that came with the case and the extra rgb fan that you bought. How many pins and volts are the two fans rgb fans that came with the case and how many pins and volts are the extra fans that you bought?
Hi! The two front fans included with the case can be connected to the NZXT controller, or you can use the attached ARGB +5V 3-pin connector. The extra purchased fan must be connected to the NZXT controller, as it's the NZXT connector type. So if you purchase additional fans, you have to use the NZXT controller.
Hope this helps💜🖤
@@PC_SNAP Hello!
I have seen somehwhere that the nzxt controller only supports 4 pins and the two front fans are only 3 pins so I was wondering if the controller supports both 5V and 12V and if I could connect the 3-pin fans to the 4-pin controller?
I looked at the NZXT controller, and it uses a 4-pin configuration. However, it doesn't specify whether it operates at 5V or 12V. My guess is that it might use +5V, similar to ARGB. Since compatibility with the mainboard header seems unlikely, that detail might not be crucial. The front fans have an ARGB 3-pin connector at the NZXT end, making them compatible with the mainboard :)
@@PC_SNAP Are the front fans in the h5 flow rgb connected together or do they both need to be connected individually to one header?
Does the Ryzen 7 work on that motherboard? Clean build btw
Thank you so much!
The Ryzen 7 needs the AM5 socket like a B650 or X670 motherboard. Depending on the CPU, you choose the appropriate VCORE and heatsink.💜🖤
That's one mean looking build! I'm planning to use the same parts but in white. Can you please tell me if the h5 flow rgb cabinet comes with a fan controller or not? Also if those fans are pwm controlled or not?
I was going for the regular h5 flow but it doesn't come with fans and I'd have to buy fans anyway so I'm thinking to increase my budget for the rgb variant.
Also, subbed for more quality content!
Thank you so much!
RGB and PWM controllers are not included in the case. However, there are two front 140mm fans and one bottom 120mm fan connected through a PWM splitter, and they are connected using a +5V ARGB gender cable. Using an NZXT motherboard might make it easier but you can also use other options without any problems.
In the video, the Kraken AIO has the RGB controller with 3 nodes, so the rear fan to it together.
The remaining fans were connected to the NZXT N7 Z790 motherboard directly and controlled all fans' RGB and PWM through NZXT CAM.
I hope this helps 💜🖤
@@PC_SNAP Thanks for the reply mate. This is just the answer I was looking for. I'm also planning to get a 240mm kraken so I believe I'll be able to control all the fans with it's controller.
Beautiful 😮
Is That a dream?? ❤❤
there was no fan hub used right? only the rgb pins on the motherboard right?
Check 02:39, I used the controller included with the Kraken Elite for the rear cooling fan and radiator fans. The front fans have an attached ARGB +5V connector, so I connected it to the motherboard.
여행다녀와서 조립하려는 피씨랑 너무 비슷하네요. 케이스, 보드, 수랭, 파워까지 정학히 제 견적이랑 같고
14600k, 아수스4070 , 에센코어ddr5 7200 48gb 주문하려고 하는 중입니다.
팬을 core 말고 duo로 다 교체하려고 생각 중이었는데 core로 해도 예쁘네요!
오호~ 안녕하세요~
좋은 조합으로 가시군요 :)
케이스 기본 팬하고 크라켄 RGB 팬이 CORE 버전이라 거기에 맞춰서 1개 CORE RGB 추가해서 빌드했네요.
전면하고 후면 DUO로 해도 꽤 예쁠것 같아요.
그럼 멋진 빌드하셔요! 댓글 감사합니다.💜🖤
With the case fans, can I use the Nzxt fan and rgb controller?
It's a standard NZXT build, keep it up!
Yeah! That's right!
It's enough to feel NZXT's minimalistic vibes 💜🖤
Amazing build.. what song is this?
Thank you so much!
I'm afraid I didn't keep a record of what music was used.
I'll make a note of it in the TH-cam video description next time💜🖤
I wish you had talked through the assembly! I have the same case and cooler, but I'm so confused with the cabling.Are the front and rear fans hooked direct to the motherboard? If I buy NZXT RGB and Fan Controller, can I connect all the fans, including the cooler fans to that?
I answered a question from another subscriber, so I'll tell you the same answer here!
=====================================================================
RGB and PWM controllers are not included in the case. However, there are two front 140mm fans and one bottom 120mm fan connected through a PWM splitter, and they are connected using a +5V ARGB gender cable. Using an NZXT motherboard might make it easier but you can also use other options without any problems.
In the video, the Kraken AIO has the RGB controller with 3 nodes, so the rear fan to it together.
The remaining fans were connected to the NZXT N7 Z790 motherboard directly and controlled all fans' RGB and PWM through NZXT CAM.
NZXT 깔맞춤해서 그런지 ㅎ 감성 오지네요
보드하고 램하고 쿨러하고 참 이쁜 것 같습니다.
영상잘봣어요
안녕하세요 :)
저도 그렇게 생각합니다.
댓글 감사해요 💜🖤
Hello blogger, could you please provide me with the source link of the GIF from 4:30 to 4:35 It's really beautiful！！！
I forgot because it's been a while.
Have you checked out this link?
giphy.com/explore/download
very well made
Oh, thank you for watching other videos!
허얼 완전 제 취향이네요 참고해서 저도 저렇게 해보고싶어요 ㅎㅎ 잘보고 좋댓구하고갑니다~
Awesome👍
Thank you so much💜🖤
간만에 들어왓는데 영상 퀄 엄청 좋아졋네요
스튜디오같은데서 찍으신건가요?
영상보면 빨려드러갑니다 ㅎ
한국에서 이런 빌드영상 귀한데 포기하지 마시고~자주올려주세요ㅎ
오호! 멋진 말씀 너무 감사드려요👍
아~ 스튜디오가 있으면 참 좋을 텐데...
아쉽게도 작은 방에 영상 데스크 놔두고 시간 날 때마다 짬짬이 작업 중입니다.
기억해주시고 찾아와 주셔서 정말 감사해요💜🖤
Estou montando um setup identico ❤
What's the music in the video?
Here we go!
shorturl.at/icQ1P
shorturl.at/rKmAU
@@PC_SNAP Awesome ty
Does this case support an RTX 4090?
The maximum GPU clearance is 365mm and it seems possible within this range when mounted vertically.💜🖤
which fans do you used in front?
Fans included with the NZXT H5 Flow RGB case!
72° in cinebench ? did you undervolt the cpu ?
I used the NZXT N7 Z790 motherboard with default settings. If adjusting the voltage in the video, I always describe undervolting.
ok man i apreciate the answer thank you
wait whats the difference between nzxt kraken 240 and nzxt kraken elite 240 unu
The pump is the same as the Asetek 7th generation, but there is a difference in the LCD.
what rgb controller is that?
It's the controller included with the NZXT Kraken Elite and RGB fans!
@@PC_SNAP i can’t buy it separate
선리뷰 후감상
감사합니다 💜🖤
🥰
nzxt h7 and turn off led
My friend, sometimes RGB is fine!
👍🏻
Thank you so much💜🖤
RTX4070!!!!!
YE-AH!
Wilson Cynthia Clark Sarah Taylor Carol