Came over from The Den of Tools on his recommendations. Great video and keep up the good work. I have been looking for a packout system like this. I will check out my local Wal-Mart for more info.
Great job for your first video. 👍🏻 Den of tools gave you a shout out. What a great compliment. I really liked how well you went through the demo process.
Great video. Down to the point and covered a lot of detailed information. I personally own quite a few of Hart tools and was thinking of investing in a roll around stack box. Now that I know Hart is expanding their toolbox line I'll stick with Hart.
Just want to mention that TTI may make the power tools for Milwaukee and Hart, as well as for Ridgid and Ryobi. They don't make the tool cases for any of those brands. Keter in Israel 🇮🇱 makes the majority of the cases. They make the Milwaukee PACKOUT, DeWALT Tough Cases, and the Ridgid tool cases. As a matter of fact, Keter sells the exact same cases as the Ridgid, in Europe but under the Keter name. Keter also makes the Husky brand of cases which amazingly look identical to the Hart cases.
You're right, I meant to say "owns" rather than "makes" while addressing their relationship to one another. That was a slip up on my part. Thanks for helping set the record straight!
I actually got this box with the Hart stack rolling bottom. I use it for rc racing. So far so good. I would recommend laying tools like pliers and long screwdrivers across the drawers and not front to back. They sometimes can stick up and prevent the drawers from opening and closing properly.
This is what i was looking for as a service tech we need tool boxes with drawers for tools for ease of access. Gonna go get me some of these and have them stacked. Thank you for the review. Not everyone has the money for Milwaukee packouts this will fit my budget.
Hello nice video I’m now a new subscriber coming from Den of tools. I was already considering the Hart system, now because of this showing they’re going to expand it. I’m now sold on the system because I love those drawers. Thanks
I own 4 of those and they are amazing for the price. Im completely impressed and cant wait for them to design more for it. Just something i found that wasnt mentioned in this video. That Hart latch once its unlocked and sets all the way down you can push it straight into the packout.
Hey, man! Enjoyed your video, hard to believe this was your first. I subscribed, because I can relate to you a lot better than some of the folks that do tool reviews. Between you and the Tool Bear, I think I can get good, straightforward info on tools. Best of luck to you!
I really appreciate that! I'm gonna do my best to keep everything fair and honest. I actually have a few tools that are complete junk that I also plan on reviewing so others don't fall victim to spending hard earned money on them. Thanks for watching!
Thanks for the sub! I think I'm going to do one comparing small parts organizers next since I have the DeWalt, Harbor Freight, Stanley, and Craftsman versions
Currently, I am using a backpack for my tools. But, I believe a system like this would work excellent for me. The price point of the heart stackable box is very nice. I have purchased the starter kit. I am impressed with it. I did just purchase this two drawer system to add to my stackable system. I do think with the total four bins that I will have, that will be a good starting point. My only gripe with this system, and I'm sure it is with all of them, is the fact that there does not seem to be any organizers on the inside of the box on the side of the box for wrenches and pliers and the like. But, this will help me keep my crap organized all the better.
Nice job! I did a quick review video on the Husky Connect drawer system which looks a bit like this one. I like some of the Hart features and also how modular it is with other add-ons. Looking forward to a follow up from you to see how it holds up. Good luck with your channel!
Just found out about these. I like they have the drawers and organizer for better access. I have the Rigid ones , they dont make a drawer. The Dewalt I dont like latches, no handle on the drawer unit., expensive. The Milwaukee,, waaayyy to bulky. PS, the drawers look small for tools??
I have nothing of great insight to say. The tool bear gave this video a shout out, so I stopped by. Just leaving a comment to bump up the engagement number. Nice overview. Subscribed & Liked - keep'em coming.
It looks like they supply enough dividers for both drawers. That’s good. The new Husky two drawer toolbox only has dividers for one of the two drawers. I returned that one to Home Depot for that reason.
Considering the fact that a two drawer system from Milwaukee is $160 and the Dewalt is 130 I’m probably gonna stick with the heart for now I won’t be using it on a daily basis so I can’t justify spending that much I can buy a whole heart system for the price of two drawers from Milwaukee
Haha it's all good. Testing to see if various batteries will fit is actually a really good idea for future tests of mobile systems like this. I may even do a short follow up video to see what batteries and common tools will and won't fit in the drawers as well as measurements of the divided sections. Thanks for the idea!
I don’t have the Milwaukee two drawer but I believe that the drawers are deeper on the Milwaukee two draw verses that of the hard two draw. The heart to draw may be more similar in size to the Milwaukee three drawer unit. Any case nice vid 👍
Agreed! I was expecting flimsy drawers or thin plastic based on the price point and the fact that it's marketed more for home gamers, but the build quality is nice enough that I would consider it good enough for some contractors
Why are there no reviews on the other 3 Hart tool boxes? And only 4 videos of reviews on this particular drawer box? I just ordered the “tool box” and “half stack organizers” on Walmart app as a bundle. Noticed they weren’t in store and tags says online purchase only.
I'm not sure to be honest with you. I know they were also giving those other boxes out to other Walmart reviewers, but many of them seem to just be in it for the free stuff and don't even provide the minimum required feedback for Walmart's website, let alone go above and beyond to share the info with others on their own accord. Unfortunately I only get to select one product from the lineup of whatever Walmart randomly offers (if I'm even quick enough to snag one after I get the email since they have more reviewers than they do products), otherwise I definitely would have gotten all of them to try out! If I ever have the opportunity to get my hands on more, I'll definitely share them!
I've got to agree that's a good point - that there should be more reviews - that Walmart should've and could've better supported the rollout of the new products by giving every reviewer ALL components of a toolbox organizer that are meant to stack together - I can't believe I / we have to state this - it should be an obvious issue, as they are meant to be put together. - And if Walmart has not yet manufactured the other components, then perhaps they should've before releasing any of them. It reduces their value. Edit: I do like the tool box shown in this video - was surprised at its features and know Walmart will probably have a very competitive price.
@@pentiuman I agree there is much to be improved with the review system, because as it stands, there are 3 different companies involved in each transaction: The company that produces the product (in this case, Hart), the outside vendor that handles the review program, and Walmart. At the time of recording, it was listed as "out of stock," but the product page showed $39.98. Now, it's available for purchase (online only) for $43.94.
Hey hey bro you said don’t have another modular system 🤔 then proceeded to show your tstack box Dun dunn dunnn!! I’m on to you budd 🕵🏻♂️👁 Ps. Nice vid thank you I got hart small parts organizers definitely gone grab couple of these too 🤗
If DeWalt could figure out how to lock stuff together and stick with one design I'd be much happier with their modular stuff. Some smaller boxes lock together but not all. It's a little frustrating. I have some of their small parts organizers. I went with Milwaukee. They are insanely tough. I bring different setups to different jobs. Super sturdy and I don't worry about them not attaching to each other. Very smooth and definitely high quality. That being said, that Hart system looks like a better design than DeWalt's. Not sure about ruggedness, but I haven't had any hands-on. Great video. Very enjoyable and you're very natural and chill in front of the camera.
Thanks for the encouraging words brother! I was actually quite nervous since I prefer to be behind the camera, but I'm sure I'll get more used to it over time
At the time of recording, it was listed as "out of stock," but the product page showed $39.98. Now, it's available for purchase (online only) for $43.94.
At the time of recording, this 2 drawer unit was listed as "out of stock," but the product page showed $39.98. Now, it's available for purchase (online only) for $43.94.
All hart tool boxes are super flimsy and might be ok to keep at ho e to pull out once every two years but don’t fool your self and show up on the job site with this crap. 1, you will be made fun of and laughed at. 2 , it will break by end of the day.
Glad you did a water test. Divider system is a little outdated and is just landfill material. They should spec and produce the drawers and then people can 3d print their own inserts or trays. Because some of us prefer trays. There's no reason not to support both, other than just stodgy designers.
Personally I like the customizable dividers since they're instantly available for set up and can be changed as needed, but I also agree that a 3D printed tray would be really cool! Since the divider tracks in the floor of the drawers are recessed and the tracks on the back and front only protrude a miniscule amount, I think it would still be a good candidate for a 3D printed tray. Thanks for watching!
Haha I tend to get stuck on words when I get nervous. I kept saying "that said" when I would segway into another thought too, but I was able to edit most of those out since they were at the beginning of the sentence lol. Thanks for watching!
@@dadtothebone3158 I liked the video, not hating. I noticed you were keeping your hand on top of the box when opening the drawers. Is there an issue with weight?
@@xshadowxsoldierx No worries, I ain't a snowflake that gets offended by anything and everything lol. It wanted to tip forward when I had the drawer open more than about halfway with the 15 lbs of tools in said drawer. It was worse when it was the top drawer that was loaded down and open, but the bottom drawer was empty at the time so I'm thinking, in real world applications, with both drawers loaded and only one open at a time, it would probably be more stable. Also, if it were attached to the STACK system, that would also help stabilize it. Once I get it set up with my own tools, I'll make a follow up video to show how I used the dividers and how it's holding up and I'll make sure to point out it's tipping point with each drawer open if it still does it. Thanks!
The mug will definitely make regular appearances haha. I might start hiding it around in the background of future videos sometimes too. Thanks for watching!
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [TEASER MV]](http://i.ytimg.com/vi/VC689EgdSIw/mqdefault.jpg)
Good job. No long intro, no sub begging, just to the point . Clear good video quality.
Came over from The Den of Tools on his recommendations. Great video and keep up the good work. I have been looking for a packout system like this. I will check out my local Wal-Mart for more info.
Great job for your first video. 👍🏻 Den of tools gave you a shout out. What a great compliment. I really liked how well you went through the demo process.
Awesome! Thank you!
Thank you for including drawer dimensions. I couldn’t find those anywhere else online.
Nice job! I Love tossing in actual tools and the water test! Happy to hear Walmart is continuing to flesh out the Hart storage.
Me too! I'm tempted to grab the 3 piece parts organizer when it comes out. Thanks for watching!
Great video. Down to the point and covered a lot of detailed information. I personally own quite a few of Hart tools and was thinking of investing in a roll around stack box. Now that I know Hart is expanding their toolbox line I'll stick with Hart.
Just want to mention that TTI may make the power tools for Milwaukee and Hart, as well as for Ridgid and Ryobi. They don't make the tool cases for any of those brands. Keter in Israel 🇮🇱 makes the majority of the cases. They make the Milwaukee PACKOUT, DeWALT Tough Cases, and the Ridgid tool cases. As a matter of fact, Keter sells the exact same cases as the Ridgid, in Europe but under the Keter name. Keter also makes the Husky brand of cases which amazingly look identical to the Hart cases.
You're right, I meant to say "owns" rather than "makes" while addressing their relationship to one another. That was a slip up on my part. Thanks for helping set the record straight!
Good to know. I will look for one not made by Keter, BDS.
I actually got this box with the Hart stack rolling bottom.
I use it for rc racing. So far so good. I would recommend laying tools like pliers and long screwdrivers across the drawers and not front to back. They sometimes can stick up and prevent the drawers from opening and closing properly.
Thats a good idea. I wonder if the bottom tote will fit a 1/10 scale.
This is what i was looking for as a service tech we need tool boxes with drawers for tools for ease of access. Gonna go get me some of these and have them stacked. Thank you for the review. Not everyone has the money for Milwaukee packouts this will fit my budget.
Hello nice video I’m now a new subscriber coming from Den of tools. I was already considering the Hart system, now because of this showing they’re going to expand it. I’m now sold on the system because I love those drawers. Thanks
Thanks for the sub!
I own 4 of those and they are amazing for the price. Im completely impressed and cant wait for them to design more for it.
Just something i found that wasnt mentioned in this video.
That Hart latch once its unlocked and sets all the way down you can push it straight into the packout.
Hey, man! Enjoyed your video, hard to believe this was your first. I subscribed, because I can relate to you a lot better than some of the folks that do tool reviews. Between you and the Tool Bear, I think I can get good, straightforward info on tools. Best of luck to you!
I really appreciate that! I'm gonna do my best to keep everything fair and honest. I actually have a few tools that are complete junk that I also plan on reviewing so others don't fall victim to spending hard earned money on them. Thanks for watching!
Den of tools link, Good job👍 on the video...liked and subscribed..... looking forward to seeing more of your videos, keep up the great work
Thanks for the sub! I think I'm going to do one comparing small parts organizers next since I have the DeWalt, Harbor Freight, Stanley, and Craftsman versions
I love you enthusiasm about the subject matter keep up the good work ,new subscriber
Currently, I am using a backpack for my tools. But, I believe a system like this would work excellent for me. The price point of the heart stackable box is very nice. I have purchased the starter kit. I am impressed with it. I did just purchase this two drawer system to add to my stackable system. I do think with the total four bins that I will have, that will be a good starting point. My only gripe with this system, and I'm sure it is with all of them, is the fact that there does not seem to be any organizers on the inside of the box on the side of the box for wrenches and pliers and the like. But, this will help me keep my crap organized all the better.
Nice job! I did a quick review video on the Husky Connect drawer system which looks a bit like this one. I like some of the Hart features and also how modular it is with other add-ons. Looking forward to a follow up from you to see how it holds up. Good luck with your channel!
Thanks for the support! I'm getting ready to release some more content soon. I'll be sure to check out your video and channel as well
Good job on the video. Keep them coming. I would love you to test more hart tools.
Just found out about these. I like they have the drawers and organizer for better access. I have the Rigid ones , they dont make a drawer. The Dewalt I dont like latches, no handle on the drawer unit., expensive. The Milwaukee,, waaayyy to bulky.
PS, the drawers look small for tools??
Hey, here for support... Hoping this channel can grow, pretty interesting for a first video 👍🏻
Thank you for showing this! Very cool to see more products coming out for this. 👍
You bet!
Answered all my questions about this, great review, thank you
hi dude! welcome to the tube! looking forward to more videos!
Hey, thanks!
Den of tools gave you the shout out so here I am and subbed.
Thanks! I look forward to making more videos like this one
The drawer boxes look very interesting.
I have nothing of great insight to say. The tool bear gave this video a shout out, so I stopped by. Just leaving a comment to bump up the engagement number. Nice overview. Subscribed & Liked - keep'em coming.
I appreciate that!
I have the hart stack system was super cheap black friday cant wait for these more attachment
The plastic looks pretty cheap, almost like a rubbermaid container. Is that accurate?
It looks like they supply enough dividers for both drawers. That’s good. The new Husky two drawer toolbox only has dividers for one of the two drawers. I returned that one to Home Depot for that reason.
Considering the fact that a two drawer system from Milwaukee is $160 and the Dewalt is 130 I’m probably gonna stick with the heart for now I won’t be using it on a daily basis so I can’t justify spending that much I can buy a whole heart system for the price of two drawers from Milwaukee
This is awesome! Can Ryobi batteries fit inside? Maybe laying sideways? Could you measure the depth of the drawers?
Never mind, just had to watch a little longer!
Haha it's all good. Testing to see if various batteries will fit is actually a really good idea for future tests of mobile systems like this. I may even do a short follow up video to see what batteries and common tools will and won't fit in the drawers as well as measurements of the divided sections. Thanks for the idea!
Found you via the den, thanks for the info
Cant wait for the content
Is hart better than the husky one?
Not even close as far as being sturdy and ridged. Hart boxes are made of soft plastic and flimsy.
In Europe it is sold under the brand Keter, and this connectors version is Keter Stack'N'Roll.
I don’t have the Milwaukee two drawer but I believe that the drawers are deeper on the Milwaukee two draw verses that of the hard two draw. The heart to draw may be more similar in size to the Milwaukee three drawer unit. Any case nice vid 👍
Good to know! Thanks!
Great job bud, keep em coming!
Thanks! Will do!
I got the craftsmen versastack drawers on my 216 tool set I like but I wish they were deeper drawers like this one
The bear sent me!
Looks good to me I want this and am open box for the bottom.
Nice looking box.
Agreed! I was expecting flimsy drawers or thin plastic based on the price point and the fact that it's marketed more for home gamers, but the build quality is nice enough that I would consider it good enough for some contractors
Thanks. I'm already in the tstak system but these look nice.
Why are there no reviews on the other 3 Hart tool boxes? And only 4 videos of reviews on this particular drawer box? I just ordered the “tool box” and “half stack organizers” on Walmart app as a bundle. Noticed they weren’t in store and tags says online purchase only.
I'm not sure to be honest with you. I know they were also giving those other boxes out to other Walmart reviewers, but many of them seem to just be in it for the free stuff and don't even provide the minimum required feedback for Walmart's website, let alone go above and beyond to share the info with others on their own accord. Unfortunately I only get to select one product from the lineup of whatever Walmart randomly offers (if I'm even quick enough to snag one after I get the email since they have more reviewers than they do products), otherwise I definitely would have gotten all of them to try out! If I ever have the opportunity to get my hands on more, I'll definitely share them!
@@dadtothebone3158 Walmart website has the toolbox and two half stack in a bundle. Online purchase only. Just got mine yesterday.
I've got to agree that's a good point - that there should be more reviews - that Walmart should've and could've better supported the rollout of the new products by giving every reviewer ALL components of a toolbox organizer that are meant to stack together - I can't believe I / we have to state this - it should be an obvious issue, as they are meant to be put together. - And if Walmart has not yet manufactured the other components, then perhaps they should've before releasing any of them. It reduces their value. Edit: I do like the tool box shown in this video - was surprised at its features and know Walmart will probably have a very competitive price.
@@pentiuman I agree there is much to be improved with the review system, because as it stands, there are 3 different companies involved in each transaction: The company that produces the product (in this case, Hart), the outside vendor that handles the review program, and Walmart. At the time of recording, it was listed as "out of stock," but the product page showed $39.98. Now, it's available for purchase (online only) for $43.94.
Good review!
The Den of Tools Bear sent me!
Hey hey bro you said don’t have another modular system 🤔 then proceeded to show your tstack box Dun dunn dunnn!! I’m on to you budd 🕵🏻♂️👁
Ps. Nice vid thank you I got hart small parts organizers definitely gone grab couple of these too 🤗
Haha that's true! I didn't even consider that my DeWalt parts organizer was part of their system lol. Good catch!
lol thanks good work on the vids keep it up
If DeWalt could figure out how to lock stuff together and stick with one design I'd be much happier with their modular stuff. Some smaller boxes lock together but not all. It's a little frustrating. I have some of their small parts organizers. I went with Milwaukee. They are insanely tough. I bring different setups to different jobs. Super sturdy and I don't worry about them not attaching to each other. Very smooth and definitely high quality. That being said, that Hart system looks like a better design than DeWalt's. Not sure about ruggedness, but I haven't had any hands-on. Great video. Very enjoyable and you're very natural and chill in front of the camera.
Thanks for the encouraging words brother! I was actually quite nervous since I prefer to be behind the camera, but I'm sure I'll get more used to it over time
Great job!
The bear sent me i subbed and give a like. Great 🎥:)
What’s the price range.
At the time of recording, it was listed as "out of stock," but the product page showed $39.98. Now, it's available for purchase (online only) for $43.94.
Maybe by now you figured it out or already knew, the front locking strap will slide under bottom drawer out of the way.
Subscribed. Thanks
Holey shit, that seems pretty nice
1 question, how tall is it?
The overall dimensions are 18.95" wide, 13.06" deep, and 9.18" tall. Thanks for watching!
How much is the hart syatem
At the time of recording, this 2 drawer unit was listed as "out of stock," but the product page showed $39.98. Now, it's available for purchase (online only) for $43.94.
It does fine in the rain nobody blasts a box with a hose
good job thanks
They new Ryobi system is much more flimsy than the Milwaukee packout so im sure the hart is close to the quality of the Ryobi system
Thanks for the insight! I'll have to stop and play with them in-store when I see them
All hart tool boxes are super flimsy and might be ok to keep at ho e to pull out once every two years but don’t fool your self and show up on the job site with this crap. 1, you will be made fun of and laughed at. 2 , it will break by end of the day.
Glad you did a water test.
Divider system is a little outdated and is just landfill material. They should spec and produce the drawers and then people can 3d print their own inserts or trays. Because some of us prefer trays. There's no reason not to support both, other than just stodgy designers.
Personally I like the customizable dividers since they're instantly available for set up and can be changed as needed, but I also agree that a 3D printed tray would be really cool! Since the divider tracks in the floor of the drawers are recessed and the tracks on the back and front only protrude a miniscule amount, I think it would still be a good candidate for a 3D printed tray. Thanks for watching!
Good look 👍👍😎🇵🇷🍕✌️
🐻 sent me
Detent
This comment indexes into your comment section which is indexed below your video.
Haha I tend to get stuck on words when I get nervous. I kept saying "that said" when I would segway into another thought too, but I was able to edit most of those out since they were at the beginning of the sentence lol. Thanks for watching!
@@dadtothebone3158 I liked the video, not hating. I noticed you were keeping your hand on top of the box when opening the drawers. Is there an issue with weight?
@@xshadowxsoldierx No worries, I ain't a snowflake that gets offended by anything and everything lol. It wanted to tip forward when I had the drawer open more than about halfway with the 15 lbs of tools in said drawer. It was worse when it was the top drawer that was loaded down and open, but the bottom drawer was empty at the time so I'm thinking, in real world applications, with both drawers loaded and only one open at a time, it would probably be more stable. Also, if it were attached to the STACK system, that would also help stabilize it. Once I get it set up with my own tools, I'll make a follow up video to show how I used the dividers and how it's holding up and I'll make sure to point out it's tipping point with each drawer open if it still does it. Thanks!
Some of those indexes should have been detents.
Keep the intro card as is. Very dad joke.
The mug will definitely make regular appearances haha. I might start hiding it around in the background of future videos sometimes too. Thanks for watching!