Thanks bud. I changed mine out after watching your video. I had a crack in the epoxy at back of the coil pack at the plug #3 location. Runs awesome again. Took me less than an hour cause of your excellent video. Appreciate it!
thanks for the video,im done took an hour and a half cuz the washer hose broke,she's a done deal running good you rock,i hope you get paid for these videos,i just subscribed
Hey John What were the symptoms you had of a blown ignition coil? I think mine is going but I don't have a scanner Check engine light and clicking when I push down the gas, shaking when in idle and driving Thanks!
Yes you will. The cracks are only a symptom of what's wrong inside the coil pack. Over time the heating and cooling cycles deform the coils inside the pack, which is what causes the misfires. Putting silicone over the cracks will not rectify the damage inside the coil pack.
Thanks bud. I changed mine out after watching your video. I had a crack in the epoxy at back of the coil pack at the plug #3 location. Runs awesome again. Took me less than an hour cause of your excellent video. Appreciate it!
thanks for the video,im done took an hour and a half cuz the washer hose broke,she's a done deal running good you rock,i hope you get paid for these videos,i just subscribed
Good job and you found the bolt, thanks for video!
Thanks! I also got the same problem in my 2000 Ford Windstar Lx. I'm going to try changing it.
What's the order for each wire from the coil to the front of the engine?
Hey John
What were the symptoms you had of a blown ignition coil? I think mine is going but I don't have a scanner
Check engine light and clicking when I push down the gas, shaking when in idle and driving
Thanks!
If its a cylinder misfire is it safe to assume its the coil? Could it also be a plug?
Nice. What code was the Windstar throwing?
You rock dude! Doing this tomorrow.. Thanks...
great help FAM save me a lot of money
Know the bolt sizes for the cover and coil pack?
I gotta do thisshe is running roughor at least look at the coil for cracksawesomethanksyour the man
THANKS A LOT
What is the size of the bolt to get the right tool?
i think for the coil.its a 7mm
How do you adjust the idle on these?
You don't. It's all controlled by the computer and the idle speeds are programmed into it.
somebody give me the strings of coil cables?
You can coat the crack with clear silicone and then you won't even have to spend $68
Yes you will. The cracks are only a symptom of what's wrong inside the coil pack. Over time the heating and cooling cycles deform the coils inside the pack, which is what causes the misfires. Putting silicone over the cracks will not rectify the damage inside the coil pack.