how would I draw a 100 x 100 x 4 thin plate in 2D and if I have used thickness 4 along y-direction and length 100 along x direction for a 2D model, what value should i input for plane stress thickness in section ?
From what I understand, you are looking at the cross section of the plate. You'll have to input 100 as the plane stress/strain thickness but most importantly, you'll have to use plane strain elements e.g. CPE4, CPE4R, CPE8, CPE8R
![[Watch Party] RoV Pro League 2024 Winter | with Moowan ( Bacon Time Vs Talon )](http://i.ytimg.com/vi/CCEDhu6dPN8/mqdefault.jpg)
Keep Going
Can you say what the assumptions/simplifications you have made are?
Is there a way to view a stress concentration factor within the software or is the only way to use the max stress to find it using the equations?
I doubt that's possible as there is no easy way to tell Abaqus what is the bulk stress
how would I draw a 100 x 100 x 4 thin plate in 2D and if I have used thickness 4 along y-direction and length 100 along x direction for a 2D model, what value should i input for plane stress thickness in section ?
From what I understand, you are looking at the cross section of the plate. You'll have to input 100 as the plane stress/strain thickness but most importantly, you'll have to use plane strain elements e.g. CPE4, CPE4R, CPE8, CPE8R
@@HubertGod hey yes I'm looking at the cross section (side view of the plate) .. I have already used CPE4
Hi sir, I have a problem with this, can I contact you and ask?
Yes, perhaps find me on LinkedIn
@@HubertGod I sent a request to connect. I am grateful