what will happend when you lift front end up or jump, skis will rotate around axles, not good for safe landing, they should be attached to springs or something to stop rotation of ski for safety ride
I would have made the front ski longer. or at least put it further back. If it lifts off the ground as it is now it will flip downward and get rammed into the snow when landing. that can probably cause you to crash pretty hard.
Proportions look OK smaller ski in front for less weight to front its ok Mount a distance piece for rear shock or find a longer one for better clearance rear ski
Put an elastic rope from the top of the front ski to the base of the fork, so the ski can not flip over, for more details check the 2 videos at my channel
Rear ski is too in front, it hits your center pivot point..... The front axle is with no bearing, so it is fixed and will eventually get loose or break the bolt. If you lift the bike, or jump with it, front ski flips nose down ending up to dive to snow, same with the rear ski. Bolts holding the skis on their brackets are too weak and badly situated. For heavens sake, don't introduce such designs on youtube and people, DO NOT copy this design as is but fix all the issues. This is clearly done by unskilled people and will eventually be a catastrophe to your health !!
First of all. I build a skibike myself WITH THIS VERY DESIGN 7 years ago and NEVER failed since then (I will upload a picture on Instagram to prove it). No catastrophe to my or other people's health who used and abused of it, I'm sorry. Using bearings causes severe injuries: when jumping, skis can easily rotate resulting not parallel to the ground or even worse vertical. Using BEARINGS is EXTREMELY DANGEROUS.
@@TheItalianMakers Gli sci vanno meglio se sono snodati, ha ragione il tipo, anche se l'ha messa giù pesante... Poi li tieni in posizione con degli elastici
what will happend when you lift front end up or jump, skis will rotate around axles, not good for safe landing, they should be attached to springs or something to stop rotation of ski for safety ride
simple! I love it
How well does it ride? the shortness of the front ski looks problematic.
Ottimo progetto.
Bro made this look too easy!
Bravo
and where do you put you feet during riding
+Thomas Fischer small skis on feet and if not working well, we will make footpegs
We were making these as kids back in the 60's!!
Nice
What are the dimensions of the steel triangles in cm? And how long should the rear ski and the front ski be?
What happens when the ski flips over on the first bump??
I would have made the front ski longer. or at least put it further back. If it lifts off the ground as it is now it will flip downward and get rammed into the snow when landing. that can probably cause you to crash pretty hard.
Quali sono le misure dei triangoli di acciaio in cm? E quanto deve essere lungo lo sci posteriore e lo sci anteriore?
Pretty dope. But those welds are bustin lose ! Lol
Proportions look OK smaller ski in front for less weight to front its ok
Mount a distance piece for rear shock or find a longer one for better clearance rear ski
Hai già avuto modo di testarla?
Vorrei costruirne una pure io
Put an elastic rope from the top of the front ski to the base of the fork, so the ski can not flip over, for more details check the 2 videos at my channel
drill a hole in their seat tube so when they wash their bike the water gets underneath the seat
nice job and from scrach thanks for the video
+billypunte thanks!
+billypunte thanks!
How many centimeters are the skis?
+Sotis Ntriv around 30 cm front and 45 rear. I would suggest using "big foot" skis
ont pourrai voir le teste?
+coqlacour araye soon
Welds weren't to bad at all I can say is maybe turn up your colts and run your head a bit faster and you won't have to grind as much
Volts
+Scout Master DongBag thanks I'll try that!
Why didn´t you use a lathe to make the shafts, then all of it would be lighter, and your front ski is way to short!
but you deserve a like, even though youre italian :-)
there is no footpegs?
+Jake Mallett we will first use them without footpegs and with small skis at our feet for braking and then with footpegs. You ll see in a future video
The Italian Makers very interesting, I will be looking forward to that video :)
Ok where do i sent my money
you could make a business out of selling mounting kits for that. It's pretty impressive.
Rear ski is too in front, it hits your center pivot point.....
The front axle is with no bearing, so it is fixed and will eventually get loose or break the bolt.
If you lift the bike, or jump with it, front ski flips nose down ending up to dive to snow, same with the rear ski.
Bolts holding the skis on their brackets are too weak and badly situated.
For heavens sake, don't introduce such designs on youtube and people, DO NOT copy this design as is but fix all the issues. This is clearly done by unskilled people and will eventually be a catastrophe to your health !!
First of all. I build a skibike myself WITH THIS VERY DESIGN 7 years ago and NEVER failed since then (I will upload a picture on Instagram to prove it). No catastrophe to my or other people's health who used and abused of it, I'm sorry.
Using bearings causes severe injuries: when jumping, skis can easily rotate resulting not parallel to the ground or even worse vertical.
Using BEARINGS is EXTREMELY DANGEROUS.
@@TheItalianMakers Gli sci vanno meglio se sono snodati, ha ragione il tipo, anche se l'ha messa giù pesante... Poi li tieni in posizione con degli elastici
Я из старого бмх и горных лыж собрал th-cam.com/video/an2ojQq4TrA/w-d-xo.html
xd
xddd