@mashleybuilt7337 I've looked at the listing on several websites. I also emailed the company but haven't heard back yet. Just need to find out what the threads are on the ends of the rail. If you bought the fitting for the feed side you can look at your purchases. I really appreciate it.
@@swanginfleet "Size: AN6 (9/16-18 UNF) male flare to 3/8 inch (9.5mm) push on hose barb" this is what I purchased and it worked. I'm not sure if the hole on the regulator side is different, but thats the size that worked for me
If u run the filter right off the rail then u can screw line into it. Had do mine that way
So was the pressure regulator worth it other than the o ring being big?
It depends. This regulator doesn't hold pressure after the car is turned off like an OEM or a good name brand one. I don't personally care for it.
WALLS!!…..ha..good god yall,what are they goowd for? Absolutely nuffin…say it again.. huu!.
Do you know the thead type and size on the ends of the fuel rail?
Im referring to the threads that were damaged on yours.
The side I needed an extra fitting for is -6an I'm not sure about the return side.
Ohh sorry. I'm unsure. I'll have to go back and see if the listing has that information.
@mashleybuilt7337 I've looked at the listing on several websites. I also emailed the company but haven't heard back yet. Just need to find out what the threads are on the ends of the rail. If you bought the fitting for the feed side you can look at your purchases. I really appreciate it.
@@swanginfleet "Size: AN6 (9/16-18 UNF) male flare to 3/8 inch (9.5mm) push on hose barb" this is what I purchased and it worked. I'm not sure if the hole on the regulator side is different, but thats the size that worked for me