I lost a piece of my DP-SM a few years back when I hit some rocks. This was a cheap alternative to removing the lower unit and having a new section of aluminum welded in. That usually entails removing the lower shaft along with the bearing housing and seals so the welding of the new section doesn’t burn up the shaft seals. Will do that eventually but this works well until then!
@@michaelromer2016 ثانكيو ثانكيو ...لدي زورق بانيو طول 5 امتار وعرض 2 متر ومركب عليه ماكنتة جونسن 70 عند السير يذهب يمينا ويسارا ولم اعرف السبب وهل هذه المكينه تكفي له ام صغيره عليه
Thanks Mike for the info. I installed a Skeggard on mine 10 years ago for a bent skeg. This thing should be on every boat.
Thanks for your comments! I totally agree. It only makes sense. Plus, worst case you knock it off, and have to my another one.
Can you tell me where to go to buy a skeggard for a Volvo penta six? And what brand would be best. Thank you , enjoyed your video
It’s also nice to have a rudder when driving the boat, which the skeg accomplishes.
Very true!! Please subscribe!
I lost a piece of my DP-SM a few years back when I hit some rocks. This was a cheap alternative to removing the lower unit and having a new section of aluminum welded in. That usually entails removing the lower shaft along with the bearing housing and seals so the welding of the new section doesn’t burn up the shaft seals. Will do that eventually but this works well until then!
Michael can you tell me the specs of that prop that was on this boat? I’m researching what prop might be best for my boat.
Thanks
هل تلف هذه القطعه يؤثر على سير الزورق
They don't cause any resistance to the boat. If anything, they will help you cut through the water better.
@@michaelromer2016
ثانكيو ثانكيو ...لدي زورق بانيو طول 5 امتار وعرض 2 متر ومركب عليه ماكنتة جونسن 70 عند السير يذهب يمينا ويسارا
ولم اعرف السبب وهل هذه المكينه تكفي له ام صغيره عليه
Thanks 🙏
Anytime!
Long shot but part number by chance
Would you have the part number please