Scale model rc car wash tri foam soap friction brushes wheel scrubbers 3 brush system CHP California Highway Patrol white polar bear patrol car LED spotlights
Absolutely phenomenal 👏, a couple of ideas i had was maybe add some sort of drainage system to the inside of the wash tunnel so there would be no water leaking. Another idea I had was to add more decor to the tunnel itself like outside lights to indicate the carwash was in use or add doors and windows to view what's going on inside the wash. another idea for this build is maybe a sign to indicate where the car should stop or could have a voice telling the driver what to do. and maybe you could add a inside the car camera view to kinda have a 1st person view camera shot. Not saying that the carwash itself was bad this is one if not the best scale model i have seen but those were some ideas to help you out 😁👍
I appreciate that!! I actually have some full wash bays with windows doors and vacuums! I will work on more inside the car views with my other Wash. this wash was an experimental wash so I didn’t expect much from it. As soon as I construct the new bay, it will have lights entry and more signage! Thanks again for your suggestions as I have yet to incorporate all of them into one video
I love your brush material. I made my first model carwash in 2006 and my last in 2009. In 2020 I started working on a ryko premier plus and have only picked up the project again in the past couple of weeks. I would love to know what you use. I used to use lycra/spandex wich worked well and developed my own brush core system. Glad to see you still making model carwashes. Once Im done maby I can share some ideas.
Thank you! I used medical tourniquets for the brush material and roll paper core for the brush core. This material seems to work better for me when soaked with water. However, I will get back to using foam for the brushes.
I appreciate it!! This was an experimental project because I was testing wheel scrubbers, tri foam and a new setup for the three brush system. Lots of experiments with this wash.
Woahhh that’s awesome!! Hey dude I have a question, are you using some sort of computer to control each cycle of the wash or do you have some sort of controller that operates everything?
Thanks a lot!! My car washes are manually controlled via a control board. I do have microcontrollers that can control the wash on their own but I have not reactivated them yet.
@@britishcarfan9601 I chose not to run it off of a computer only because I have more free reign over the types of Wash cycles it’s capable of. Pretty soon, I will reimplement the microcontroller software into the systems. But I need to finish several phases of research and development first such as with the perfection of the tri foam delivery system. I’m working on it though!
@@jrwash1962 Ahh I see. Well I wish you good luck on your projects! At some point could you make an old Hanna Sherman tunnel with Proto-Vest dryer like the 90T Stripper in the near future?
@@britishcarfan9601 At this point I’m open to building one for sure, I just need time. My work schedule has restrained me to the point where I don’t have a lot of time to work on the projects but I’m trying to get through that too. I love the vest dryers lol
Thank you! It’s not based off of any system in particular because is an experimental project. The only requirement was for it to have 3 brushes and wheel scrubbers. I appreciate it!
amazing id love to try make 1 myself if i knew what i need to make the brushes and get the water soap to spray out and make the brushes spin
It’s taken me years to get to this point but I’m still learning!
Absolutely phenomenal 👏, a couple of ideas i had was maybe add some sort of drainage system to the inside of the wash tunnel so there would be no water leaking. Another idea I had was to add more decor to the tunnel itself like outside lights to indicate the carwash was in use or add doors and windows to view what's going on inside the wash. another idea for this build is maybe a sign to indicate where the car should stop or could have a voice telling the driver what to do. and maybe you could add a inside the car camera view to kinda have a 1st person view camera shot.
Not saying that the carwash itself was bad this is one if not the best scale model i have seen but those were some ideas to help you out 😁👍
I appreciate that!! I actually have some full wash bays with windows doors and vacuums! I will work on more inside the car views with my other Wash. this wash was an experimental wash so I didn’t expect much from it. As soon as I construct the new bay, it will have lights entry and more signage! Thanks again for your suggestions as I have yet to incorporate all of them into one video
I love your brush material. I made my first model carwash in 2006 and my last in 2009. In 2020 I started working on a ryko premier plus and have only picked up the project again in the past couple of weeks. I would love to know what you use. I used to use lycra/spandex wich worked well and developed my own brush core system. Glad to see you still making model carwashes. Once Im done maby I can share some ideas.
Thank you! I used medical tourniquets for the brush material and roll paper core for the brush core. This material seems to work better for me when soaked with water. However, I will get back to using foam for the brushes.
Awsome man that looks awsome
Thanks a lot man!! I appreciate it!!
No problem I know you spend a lot of time on it.
Fantastic job. I genuinely think this is your best one yet, it’s literally awsome. And the new tri foam, I love it.
Thank you!! I am finally starting new research projects with the newer models. This model is a test model which was modified from a touchfree wash.
You did a great job.
@@Leoleony123 Thanks again!!
Thr fact u made rim cleaners (which are dying in most car washes lately) is amazing. I love rim cleaners
Thank you!! I had to have wheel scrubbers lol!!
awesome video like always!! you never fail to amaze which explains why many people followed you for years!!! excited for your new projects..
I appreciate it!! This was an experimental project because I was testing wheel scrubbers, tri foam and a new setup for the three brush system. Lots of experiments with this wash.
@@jrwash1962 great experimental project! keep on making new machines man everyones loves them!
@@bpot1927 I appreciate it man!!
Dang bro that’s so cool man I actually made me my own model car wash with spinning brushes
Very nice!! I appreciate it!!
Ooh getting the c8 washed! Lol
Yes!! It’s one of the C8 CHP Polar Bear cars that I have lol!!
Love it sooo much what is the brush material though?
Medical tourniquets were used to make the brushes.
@@jrwash1962 I have them now I’ll start exploring.
@@carwashfan8729 I just got more in yesterday.
Yay me making it now
@@carwashfan8729 soon as I get off work, I will start on them!!
Now I wanna try and make one! Sorry I haven’t commented in so long btw.
It’s all good! I’m only on here every so often. Wish you the best!
@@jrwash1962 Thank you! You as well.
@@biggysmoovemusic7777 thanks!!
Looks so real! I wish I can make these.
I appreciate it!! Start with some kind of planning whether it’s drawings or an experimental project.
Sooo coool I’d love to make one could you tell me how and what the brush cloth material is?
Medical tourniquets are used for the brushes and Thank you!!
Nice!!😃
Thanks man!!
Please make a tutorial on how to make something like this!! This looks so awesome!!
I’ve been trying to find time to get that done. It’s just that my work schedule has been so busy but I’m still working on it!
Hi
@@carwashandrollercoastersvi5669 hi!
Woahhh that’s awesome!! Hey dude I have a question, are you using some sort of computer to control each cycle of the wash or do you have some sort of controller that operates everything?
Thanks a lot!! My car washes are manually controlled via a control board. I do have microcontrollers that can control the wash on their own but I have not reactivated them yet.
@@jrwash1962 Oh nice!!! I thought you had a computer running it all looool 😂🤣
@@britishcarfan9601 I chose not to run it off of a computer only because I have more free reign over the types of Wash cycles it’s capable of. Pretty soon, I will reimplement the microcontroller software into the systems. But I need to finish several phases of research and development first such as with the perfection of the tri foam delivery system. I’m working on it though!
@@jrwash1962 Ahh I see. Well I wish you good luck on your projects! At some point could you make an old Hanna Sherman tunnel with Proto-Vest dryer like the 90T Stripper in the near future?
@@britishcarfan9601 At this point I’m open to building one for sure, I just need time. My work schedule has restrained me to the point where I don’t have a lot of time to work on the projects but I’m trying to get through that too. I love the vest dryers lol
Awesome video and it definitely shows how much work you put into all your machines. Is the material called theraband for the brushes by chance
Thank you!! I appreciate it! The brushes are actually medical tourniquets.
Based on a real system, what is this machine supposed to be? Awesome machine, though.
Thank you! It’s not based off of any system in particular because is an experimental project. The only requirement was for it to have 3 brushes and wheel scrubbers. I appreciate it!
This is a soft touch car wash
Yes!
What material do you use to make your brushes out of where did you buy it
Wows sorry, I though I responded but it never posted. 5 months late! Sorry. I got the medical tourniquets from Ebay.
what are the specific dc motors you use?
I used robotics dc gear short shaft motors for the brushes, gantry and wheel scrubbers.
Hi what are the brushes made out of
They are made out of medical tourniquets
@@jrwash1962 how do you hook them on the brush
@@carwashandrollercoastersvi5669 They are stapled on.
@@carwashandrollercoastersvi5669 They are stapled on.
𝘱𝘳𝘰𝘮𝘰𝘴𝘮 🤘