13" inch Early 2015 MacBook Pro A1502 Disassembly Battery Spicy Pillow Replacement Repair
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2021
- Disassembly Repair Fix Tutorial Teardown Guide If my videos helped you save money, please consider helping me continue to make these videos by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
Venmo:
"@BinhVu" Last 4 Digits if it Asks Are 6734
Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
itsbinhrepaired@gmail.com
Patreon:
/ binhrepaired
Feel free to mail me your old electronics or parts you replaced during an upgrade.
Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035
Tesla referral link: www.tesla.com/referral/binh58522 - แนวปฏิบัติและการใช้ชีวิต
![13" MacBook Pro Battery Replacement Tutorial [Early 2015, A1582] #ifixit](http://i.ytimg.com/vi/gYICJiqESDU/mqdefault.jpg)
![เจ้าผู้เดียว - ดิด คิตตี้ [OFFICIAL MV]](http://i.ytimg.com/vi/q0NLCYKBOTo/mqdefault.jpg)
![[TH] LEV vs TLN | TE vs VIT - VALORANT Champions 2024 DAY 3](http://i.ytimg.com/vi/_AbmrWv2lO0/mqdefault.jpg)
Thank you for not letting anything out like other tutorials regarding this do. Amazing.
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you so much, I did my battery replacement because of your guidance. Thank you million times
Awesome! If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you for the clear instructions. Followed and battery replacement successful. Important tip for whoever else watches: First finish watching until the end of each step, before jumping in, e.g. when inserting the battery. I did take off the top plastic of the replacement battery too soon, but luckily the cells still held together during insert. I also forgot to put the touchpad bottom connector latch in the DOWN position before doing the P+R etc. power on... and had a slight panic when my Mac booted to the password recovery screen and I couldn't use the touchpad or keyboard. Quick re-watch of part where you reconnect trackpad fixed that ;) PS. The tool used for loosening the old battery == palette knife (someone else identified it for me) and it works as advertised.
Awesome, glad the repair went well in the end. Thanks for the support as well!
Thanks for that explanation. It helped me a lot, I believe it helped many other people too.
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Thank you so much for this!! Very easy to follow. Great teacher.
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you, your demonstration was very good and helped me.
Big thumbs 👍 bro
Awesome, glad it helped! If you haven't already, please like and subscribe so others can find my videos. Thanks!
Very helpful. Clear images and good commentary.
Glad it helped. Thanks for the support! Just realized the same name. Haha
Great videos. Have replaced two batteries with your help. Thank you!
Awesome, glad it helped! If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
I am surprised you were not too scared of the spicy pillows!
Lol I've worked on thousands of these.
Thanks. Very useful vid!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
best tutorial !
Thanks! If you haven't already, please like and subscribe so others can find my videos. It really helps the channel grow.
Title should be “Bob Ross fixes MacBook. ASMR” 😂 👍🏻
Lol happy little trees
18:49 You can actually remove those 8 screws for the trackpad guard plate and clean it separately. There is no adhesive gluing it down and it comes right off. I did mine like that so I won't risk getting any fluid into the trackpad area. Made it easier to get a perfect clean and shine, and screwing the plate on back after.
I know, but didn't want to take it out. Lol
Thank you
No problem
This was so easy! I didn't think I'd be able to do it correctly. Thank you!
Glad it worked out. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
I used nail polish remover to help liberate the battery and clean up the adhesive from the case. It's worth a go as it makes it really easy !
True, but very dangerous. It can dissolve plastic and melt the keyboard keys and film. Be careful with that.
@@ItsBinhRepaired are you sure about that? Ifixit basically put it in their kit and charge people $15 for it. I feel like they wouldn't sell it if it was that dangerous.
@@gideonb93 yes, I'm sure. That's why ifixit has people completely disassemble the laptop, which is unnecessary. I've had a customer spill acetone (nail polish remover) on their keyboard abs it deformed the keys and destroyed the laptop.
Unfortunately I didn't have any alcohol or nail polish laying around, so I just used a old plastic credited card and slowly pried it off carefully. It's doable if you go slowly and carefully and only have to watch out for is puncturing the battery seals. I punctured one of the cells when using a mini minus driver with a metal head. A bit of smoke came out with the sweet smell. Stopped after that and just used plastic card since it's less likely to puncture the seals. Got the job done perfectly in the end.
Yeah, you have to be careful with that. The fumes are toxic.
excellent
Thanks! If you haven't already, please like and subscribe so others can find my videos.
Thankyou
Glad it helped
The easiest method to remove the battery that always worked for me is to take a thin nylon rope and push it underneath every battery piece on both sides. Few scrubbing moves and the job is done.
Nice
The adhesive glue comes off easier with a citrus solvent like C22 Citrus Solvent Wig Adhesive Remover and than use rubbing alcohol for final cleanup
Anything that dissolves grease would technically work. Acetone is the strongest, but could easily dissolve the plastics as well.
While removing the adhesive that is on top of the track pad, is it okay to wipe the alcohol over the 8 screws on the track pad? First time fixing mines so should I be worried if alcohol seeps through the lining of the screws? Thanks in advance.
I would avoid it
I'm about to replace battery for a 15" 2015 with a slightly bloated battery. It has Monterey installed. Are the keyboard inputs I need to do after the same still?
Yes
Hey man I just did this upgrade on my computer exactly. I accidentally removed the keyboard connector and while trying to re insert it I scraped off the last pin and now some of my keys don’t function. Am i totally screwed or is there a way to fix that individual pin
I'm not sure.
is it dangerous when the battery gets so bulky?
When I replaced mine, the battery was so bulky it literally bent the aluminum a bit.
Just don't pop it
I used this video and others to replace my battery. I didn't like the idea of using a metal bladed tool to cut through the adhesive, so I used a combination of a credit card and a plastic putty knife. I finished doing the entire operation in about an hour and half. Apple Store said they could not get a replacement battery and that I was going to have to buy a new laptop. So Ebay battery and 1-1/2 hours of labor, and I am up and running again.
Awesome! Hope the battery works well. I usually go with Amazon. They have better return and refund policies.
@@ItsBinhRepaired - unfortunately, Amazon won't ship batteries to Hawaii! But so far so good.
@@genboyer :( that sucks
I've already bought an OWC replacement battery for my mac book pro. Have you ever used that?
Should be decent.
@@ItsBinhRepaired Thank you so much! I was able to remove the battery and put a new one and dropped it off at the Apple store.
@@makikuroda4890 awesome, glad it worked out. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Thank you so much for the contribution! I really appreciate it.
Is it possible to explode the Mac book pro after puncturing The battery? I’m just scared about doing the same thing😅 And How strongly did you push the batteries through ?
You can cause a fire. I never had it happen, but some people said they did.
I'm a beginner at fixing PC. Which one is more dangerous, using a spatula or acetone to remove the batteries? I felt like acetone might melt outside of the batteries.
Acitone can melt a lot of things. I wouldn't risk that.
I just used rubbing alcohol to the bottom of the battery edge and used plastic card to slowly remove it, not the best way, like the nylon string comment. On another note, why is this model Macbook Pro so prone to battery swelling comparing to others?
From leaving it plugged in
Likely they tried to use more of the max capacity.
I want to replace myself the battery but i the same time i want a authentic apple battery or at least a good brand, what i have to do ??
Pay a lot of money to ifixit. Their batteries might be the best, but I'm not sure. Apple only sells overpriced iPhone parts. They don't sell MacBook parts.
@@ItsBinhRepaired Great video. I think mine is due for a replacement soon.
Where did you get your battery? How much was it? How it is holding up? Could you please provide a link?
Thank you.
@@hulong0205 here amzn.to/3R7N7Ss they're my customer's computers. They're happy with them.
I replaced my battery but now laptop only comes on with the charger and says battery not charging. I ordered a brand new battery, any ideas?
Either it's not plugged in all the way or the replacement is defective.
@@ItsBinhRepaired I took it apart again and redid it, still nothing; I will reach out to manufacturer
How did it go?
Thank you, everything went smooth but now my mouse pad is not working.
You might have damaged the trackpad or the trackpad cable.
@@ItsBinhRepaired I have ordered the cable to see if that resolves the issue. If not, then do I have to replace the trackpad, by again removing the battery? Anyhow do I stick it back, put glue myself?
@Sri Reddy You can just roll up packaging tape.
Did it work again with the new cable? I have the same problem with the track pad 🫤
I hate how TH-cam doesn't notify me of replies. Were you able to figure it out?
Wow. For me. How not to take the battery out. There are so many better videos of removing a battery for mbp. Pure luck that your metal tool punctured more and didn't start a fire.
Apart from the speed of your youth it seems.
A slower approach and some alcohol applied to dissolve away the glue in a matter of minutes would have negated this dangerous video.
I have a giant Costco tub filled with these things all removed the same way. There have been no issues.
😂😂
If you know what you're doing and follow instructions, you'll be fine. Lol