Unbrick Redmi Note 9 or Redmi 10X 4G (merlin) using SPFlash Tool 100% Working without Mi Auth ✓✓
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- #Unbrick #RedmiNote9 #SpFlashTool #Note9Brick #NoMIAuthorizedAccount #MiAuth #Redmi10x4G
Hi Friends, This is AllTricks and you are watching How to Unbrick Redmi Note 9 merlin or Redmi 10x 4G without Mi Authorized Account || No mi Auth || Bypass Mi Auth Working 100% .
Please do Like ,Share , Comment and Subscribe to Our channel
You can even use this method to flash MIUI on Locked Bootloader.
...............................................................................................................
WARNING: YOU ARE RESPONSIBLE FOR YOUR ACTIONS.
...............................................................................................................
UnbrickNoAuth zip For Redmi Note 9 merlin or Redmi 10x 4G : mega.nz/file/A...
MTK Drivers : androidfilehos...
androiddatahos...
Download Fastboot Stock MIUI Roms only : xiaomifirmware...
..............................................................................................................
Credits:- Dinelok and all the other developers contributed in this.
If you wanna help us grow, you can checkout our donation link:
Paypal : paypal.me/sant...
UPI : santoshhh000@okaxis
...............................................................................................................
This video has been edited from 2 different sources in order to give complete steps to the viewers
Bro, I don't know how to thank you. You saved me, bro. Just when I thought I lost my phone, I found you, and now it's working. Thank you so much bro... ❤❤
I faced two issues so if anyone is facing them, this is what you do
1. storage has exceeded memory life - in option turn of 'storage lifecycle check'
2. ram exception error - the baud rate is too high for your phone let it be 115200.
Hope this helps someone :)
I couldn't even access fastboot or recovery, but this managed to unbrick my device so thank you so much
So you couldn’t go fast boot and it still worked
@@gv.wizzyy Yes, I was skeptical, had talked to Xiaomi support staff etc, but this genuinly worked, as long as you follow the steps in order. If the phone is in a boot loop to redmi logo and off again then it should work as it did for mine.
Bro did the phone connect to the pc while it was keep booting to the Redmi logo?
dude, super thank you so much, i wasn't using any phone for two weeks now because i bricked my phone from downgrading it. now, i revived it following this tutorial. thank you so so much !! that saved me some pennies
Glad to hear 👌
Maaaan! I tought my phone was dead. I revived it with your help! God bless you my friend.
Thank you
I thought my phone was dead. I was so scared. I followed your tutorial to the letter and it worked. thank you so much.
Happy to help
Bro, you're my saver! Unbricked my Redmi 9, thank you very much! Peace to you and your family!
Thank you
update: Thank you so much man. After 4 hours of struggling and trying, it worked. You saved my phone. Love from Hungary
Your most welcome
DOMINIK, Magyar vagyok, tudnánk beszélni privátban valahogy? Nagyon kéne a segítség!
my phone got unknown device after this and i worry that i have to change my board because i believe i damage my own phone but i guest i wrong because after 3 days when i tried this method its perfectly work for me and thank you sir you save my phone
can't thank you enough, i tried everything to flash my bricked redmi note 9, tried your method and in 30 mins everything was done. Thanks alot
Big thanks bro, it worked. Just a note, on my phone it's hold volume down then press the power button. Python is installed on my PC now, might as well learn it. 🥂
Same on my phone Redmi 9
Broo after 3 hours of issues trying to make your tutorial, i finally did it! Thank you so much!
Your most welcome 😃
Life saver, my friends phone was bricked and tried so many method. But only in your method saw result. Highly recommend this method for anyone who is seeing this comment . 🔥🤜🤛🤝
👍👍
My phone, no fastboot, no TWRP, almost thought I was done but this video saved my ass. Thanks brother, I will buy you a beer if we ever meet.
Done 👍
bro you are truely amazing ! god bless you bro! you are a new suscriber!
Tnx m8 you save my day, I bricked my Redmi 9 global version and I use yours tutorial to fix my phone thank you one more time. Btw on redmi 9 in the last step hold volume button down and power button.
Happy to help
thank you so much my phone was dying I couldn't turn it off or go fast boot or recovery or anything it was in bootloop this helped (redmi9)
Thank you so much, man! This just saved me so much money. I considered going to the repair shop tomorrow if all else fails but this last resort worked. The only thing that got me stuck is that I can't figure out why it keeps me showing a ram exception error. Til I figured it's just the baud rate being too high I'm guessing? 921600 won't work but 115200 did. So for anyone else having the same problem, I suggest doing the same as I did.
Thank you, this is the unique video of youtube complete and functionality , i'm very happy with my phone :)
Merci beaucoup tu as sauvé mon redmi note 9! 🙂
You are my kinnnnng !!!!!!!!
where can i find this file for the miui i am could you let me know please?
@@cidinhasenna2644 I don't know anymore I'm so sorry 😱 but i finally made it work !Keep searching for DA files and you will finally find the correct one... This video was the one working for me, hope it will be the same for you...
@@madamad928 obrigado 🙏
Unbricked successfully.Thank you
THANK YOU BRO!!!!
YOU SAVE MY DEVICE!!!
YOUR THE BEST BRO.!!!!
Congratulations! The onli one that worked to me... Thanks.
Great 👌👌
You save me bro my phone was bricked your method give it new life
its done! phone Alive from "system has been destroyed"- thank you very much
a big thanks to you sir , i thought my device has been dead forever. after watching your video , i have done it .
hey im here to say thank you for your solution, Its work!!! even in 2024 it still workkkk. thoundsand thanks for ya
Thanks man, i works fine on my redmi note 9, i' am very grateful
I have a question bro. What do I have to do with MTK drivers ? Should I install those two files before starting the steps in your tutorial video?
Just follow steps given in video and if driver from folder(shown in video) doesn't install then only try to install one of other mtk drivers
love u my brother,it is worked for me,thanks a lot,subbed
dang you have a new subscriber, thanks for helping me out, but some reason, at the smart phone flash step, i many times have lot error in there, maybe it caused my device detected for COM7 or COM5 and not detected for COM3 like the tutorial, but there still detected as COM3 in UART configuration, I got 3 hours of confusion in this situation, but in another try i use USB method and at full speed, and with battery settings and it worked as in the tutorial. but thanks it means a lot❤❤
MAN, seriously, if I ever you met you in real life, I will buy you a beer. I might have stuck at that step for a week but damn, your comment saved my ass. Thanks brother.
Thank you so much for this tutorial, you saved my life! You gained yourself a new subscriber. Keep up the good work!
Thank you very much you saved me the device came back to life :)
Bro, i am literally crying right now. I tried a lot of things to fix that. I got fucking hard brick. Like I can't get recovery or fastboot. I tried your fix and it ain't worked by your way. But I'm in tears just plugged that phone at 10th hopeless attempt and it WORKED THEN STARTED FLASHING AND FLASHED SUCCESSFULLY ! Before that it ain't got succes on that bypassing. But anyway it worked. So love you and thanks a lot. I thought i lost it♥️♥️😫😫😫😫
I'm glad it helped you
@@AlltricksCoIn thaaaank you a looot!
More support from Philippines
wow its like magic ..thanks so much brother from indonesia
Your most welcome
Thank you so much for this tutorial, you saved my life! big fan sir
Thank you so much for this boss really saved me you are a life saver
Glad I could help
Thanks for bringing my phone life back but after unbrick the bootloader is locked tell me how to unlock bootloader using bugjaeger app please make a video
you are the best!!! this is 100% working thanks man!!!
That method literally save my friend's phone, I hope a method like that gets released for the Redmi Note 9T
bro thank you so much my phone is wake up thank you♥
Thank you very much. It work for me. Redmi10
Thank you sooo much buddy u saved my day♥️♥️♥️
I am interested to learn from you
You saved my life, thanks.
Your most welcome
Thank you so much . I've been searching for hours . . This help me a lot
Thanks Bhai aapne mere mobile Thik kiya good job
Thanks in advanced brother ♥️
Thanks. You save my device, it work.❤️
Not working for me.
Sp flash tool doesn't start the process.
(If it happens like this)
>
Actually it is working now.
In sp flash tool options>connection>port- select your port (go to device managers , select ports and see what it is) for me it was COM10 not COM3.
I just selected COM10 and the flashing started.
Com port number depends on port u using
you are the best. you saved me a million lives. thanks
Thanks tou you I was able to recover my device, thank you so much!!
thq bro you saved my mobile😍
Cara esse vídeo salvou meu dia!!! Parabéns!!!
Hey! Hi
I Have A Doubt?
My Redmi Mobile MIUI Version Is 13. But Unfortunately MIUI 13 Doesn't Have Fastboot Rom Can I Flash V12.5.5 Scatter file?
Or I need to wait for MIUI 13 Fastboot Rom Release?
U can use any miui fastboot rom of ur device
its realy work thank you so much for that tutorial man!
MMMM thanks :(( worked 100% regarts from Spain
Friend I need your help, my device is in that infinite loop and no matter how much I press the button combinations, nothing happens just by pressing power more volume less the computer recognizes it for a second and immediately disconnects, I no longer know what to make friends in I seriously take your help
Msg me on Telegram santoshhh000
I did it with success
thanks a lot
dude u are the best thumb up
Thank You so much it worked ! Brought the device back to life
Hi, I don't understand if this procedure keep all my old data inside the phone o will delete everything, I need to extract my old photo. Every thing work fine until flash tool, I'm waiting for your answer. Is it important know the old MIUI version? I don't remeber it, can I install the last one? Thanks a lot
You will Loose everything on internal storage
@@AlltricksCoIn what bad news, i read about a lot of guys who were happy with the trick, so they were only referring to saving the phone, not recovering the data. So the indication of SP flash tool where it says "update firmware" is fake, they could write format and install new one. The only way is then to install only the recovery type TWRP? Thanks a lot
If you select format in sptool you will loose your imei
You can try unticking userdata before flashing... I hope that helps u ...use same miui rom version you were on
@@AlltricksCoIn I was able to do the low-level dump of the memory partitions and I was able to find system files with the indication of the MIUI version installed: 12.5.1. I must be sure that flashing with SP flash tool and indicating Firmware update does not corrupt personal data, I cannot make attempts, I believe the data is encrypted and therefore I need "something" to decrypt it. TWRP seems to me that it allows you to enter the unlock code and then see your personal files, I am not interested in saving the phone, I am only interested in the data. The problem is that I can't install TWRP from SP flash tool.
Thank you so much bro 😆😆
Thanks bro for saving my device ❤️
Thank you so much, you helped me restore my phone
Bro In which state your was hard bricked or soft bricked
This video was recorded over TeamViewer ... It was someone else device (redmi note 9)
You save my device bro. Thankssss
installed MTK Drivers, but when you connect the phone to the PC, in the device manager, it is displayed as an unknown usb device. Driver signature verification disabled
Press power for 10 sec then try connecting with vol down
buddy, it worked, the phone turned on thank you very much!
Saved my life, thanks!
I love you man you saved my life
No problem 👌
I got error and they said i must do that without battery, have u got battery pluged in during execution?
No
Use volume down while connecting....since that's working for many users
Thank you so much bro,.... You are a life saver.....
Tnank you so much..
millones de gracias gracias a tu tutorial pude levantar uno que no quería con nada muchísimas gracias te ganaste un suscriptor
Nice video!
Could you please make a tutorial to unbrick a POCO F3 with hard brick? It would help me a lot.
Hello sir . I just wanna ask for help , im not getting past the Updated BTP . when i click 1ST RUN THIS on the folder . It’s not showing me waiting for device . Instead it shows me Python was not found; run without argument to install from Microsoft store . How could i get past through this
I tryed it on an other pc and it worked change your version of phyton mine worked on the 32bit version of the latest phyton
@@blackopscodm8616Onde encontrar essa versão amigo ???
gracias master el mejor 100% efectivo el metodo recomiendo al 100 el video suerte y mucho exito
every thing works fine but when i flash the rom a error massage comes in every time remove bettary and usb
Bypass should be successful then only it will flash...
Also make sure usb cable is fine or change it
I have redminote 9 and stuck in logo and restart again n again and I can't go in fastboot mode to?? Is this method will work??
Yes
Did you fond à way To fix your Phone ? ?
My phone is stuck on a bootloop. I've installed the driver and im trying to run the updated BTP part but the phone is not being recognised. Any ideas please?
Install mtk latest drivers
Thank you,it's working 100%
You're welcome!
thank you for the video, my phone is stuck in infinite bootloop after flashing wrong misc.bin, now recovery and fastboot are unavailable and only time my computer recognizes the phone is when i press vol + - and power together. it recognizes quickly and disconnects immediately. i was able to install the drivers from libusb-win32 but i'm now stuck at the updated BTP folder. phone is in infinite bootloop, can't turn it off so i can connect it with vol -. nothing works. any suggestions? thank you in advance!
Press power + volume up... As soon as u see blank screen connect ur device with keep pressing volume up
@@AlltricksCoIn volume up never gets recognized... volume down gives me sound in windows and the 1.RUN THIS command gives me this error: File "C:\Users\+++\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 64, in open
raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, 'Device not ready.', None, 21).
what can i do else???
Where did u put the folder
@@AlltricksCoIn i just moved the folder to c before i saw your answer. it's now in C:\UnbrickNoAuth\Updated BTP\Updated BTP but still no luck... i'm exhausted nothing seems to work...
@@AlltricksCoIn here is the full code (removing my userfolder in code), btw i am using vmware on mac latest python 3.9.6, till now everything worked fine don't know if this might be a problem or not..
[2021-06-30 20:01:04.920149] Waiting for device
[2021-06-30 20:02:05.185174] Found port = COM3
Traceback (most recent call last):
File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\main.py", line 213, in
main()
File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\main.py", line 42, in main
device = Device().find()
File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\src\device.py", line 45, in find
self.dev = serial.Serial(port.device, BAUD, timeout=TIMEOUT)
File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 33, in __init__
super(Serial, self).__init__(*args, **kwargs)
File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py", line 244, in __init__
self.open()
File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 64, in open
raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM3': FileNotFoundError(2, 'System can't find file.', None, 2)
thanks for you its working 100%
Your most welcome
EPIC. Works 100%
I made a mistake and now I've lost my IMEI, I have the IMEI numbers, is there any way I can put it back?
You have twrp backup of all partitions
@@AlltricksCoIn no I don't have any backup
I feel so bad for my phone. I used it for nearly 3 months and I already fucked it up. This is the only phone that I had. I bought it after saving up for almost 1,5 years. I'm literally in tears. I can't describe how much bad I feel. I feel horrible. Please, if your account is still alive, wish me luck. God bless you and your family.
Hope you fix it
happy holi man saved my day
Thanks for this video guide, it help me to fix my phone, subbed
Hello have tried the process and am getting SP flashtool error ( error status_ext_ram_exception 0x0050005 ). Is there anything I can do? my phone is bricked and cannot enter recovery/fastboot and therefore stuck
Need to bypass quickly again when it get stuck at red bar for more than 10 sec. And click on download in sptool
@@AlltricksCoIn I managed to do it. I had to ✅ the DA authenticator in Options bars. it's now working. thank u though.
Bro You are ** Really life saver for my phone. Thank you So Much For your This content🥰🥰🥰🥰
Works in miui 13?
@@JoshDroid250 no bro. You need flash miui 12.5.6 Android 11
When connecting usb do i need to turn off mobile ?
If your device bricked it's already off...
If it isn't bricked .. turn it off
Just an objection .. i was struggling to follow-up this tutorial till the point of " hold VOL UP button ..bla..bla..
for me I had to hold down VOL DOWN and plug it in (as on fastboot mode) to work..
Yeah you are correct in most cases in Merlin that's how it connect
good job is works,thanks
hi, followed the steps succesfully, but when i start flashing sp flashtool says download da 100% then it just stops, there is a sound like the device is disconnected from the pc, any help?
Try with different port
Python main file isn't working
My redmi noe 9 is soft bricked. Like it get frozen and screen crashes (colorful lines) sometimes. Should i follow these steps or is there any other method for softfbrick?
Thanks my friend, work100%✓
👍👍
Python isn't installing in my Win11,will there ve any problem if I don't install it?
My processor isn't AMD!
go to python website and download
@@AlltricksCoIn 32 arch?
@@cyberdoxisonline check ur windows property ...it is 64bit i guess
@@AlltricksCoIn But 64 bit is for AMD,I'm downgrading to Win10 and installing 32 & 64 bit both,will there be any problem if I install 32 bit python program?
Who told you it's for amd only
Stuck on Updated BTP 2nd RUN THIS
it shows Found port = COM3
and nothing else
whenever this happen
Keep pressing power + vol down while connected
@@AlltricksCoIn Thanks bro I already tried it and it worked successfully
my device is now came back from coma
Thanks a lot
Keep it up..............
Do you have knowledge about rooting redmi note 9 having miui 12.0.8
Flash magisk
Patch vbmeta
how about the phone cant connected to laptop?,like unplug auto,then plugged in the unplug again and llike that
In mtk usb mode?
@@AlltricksCoIn idk i still not try
@@AlltricksCoIn python wasnot found
Open cmd and type py hit enter
What did it says when you typed py in cmd
Thanks for sharing.
I still have some problems. After I clicked the "Download" button, my phone always disconnected and there is no yellow status bar shown(only red). Do you know how to deal with it?
Thank you very much!
Same bro any fix you got?
@@parasss.__ No way found, I ended up getting a professional to fix it for me.
@@parasss.__ As far as I know, it needs to be connected to a USB2.0 interface and is related to the computer. One of my laptops works, but not my desktop. I don’t quite understand either. You can try another socket or another computer.