Fixing All The Potential Issues With The Astro Van - Stealth Camper Astro Van (EP. 14) (1985-2005)
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- Hey everyone!
Today we are fixing all the potential issues I may have with my 1999 Chevy Astro Van. The issues should pertain with all other Astro van and GMC Safaris as well. Hopefully this video helped you out!!
Parts and tools I used:
Larger syringe then what I used: amzn.to/3gWemQW
Krud Kutter: amzn.to/3e0k3M6
Temp Sensor near the thermostat housing: amzn.to/3nwL8tn
Temp Sensor between 3rd and 5th cylinder: amzn.to/3t26Q9J
Radiator: amzn.to/2QFQNRT
Thermostat: amzn.to/2QGbbSU
RTB Gasket: amzn.to/3eImlyq
Crank Shaft Sensor: amzn.to/2RbpxL3
Brake Master Cylinder: amzn.to/2S3xOkr
3 containers of this DOT 3 Brake Fluid: amzn.to/3gTuC5l
Distributor: amzn.to/3sVG3MZ
Fuel Pressure Gauge: amzn.to/3rTmm7q
Fuel Pump I used in this video:ebay.us/ugDim7
This is the high quality fuel pump that wont fail you: ebay.us/NO4i3h
Check out my channel and subscribe!
/ automotivate
Have questions or just want to chat?
Here is my IG:
Instagram: / automotivate
Time Stamps:
0:00 Intro
0:50 Helpful tips from Chris
1:22 Crankshaft Sensor
2:49 Starting on the Brake Master Cylinder
3:30 Draining Radiator
4:05 Flushing Radiator
6:10 Installing New Radiator
6:28 Removing Thermostat Housing
7:39 Installing Thermostat Sensor
8:50 Back to the Brake Master Cylinder
10:20 Back to the Thermostat
11:30 Bleeding the Brake Master Cylinder
12:45 Finishing up and bleeding the cooling system
13:42 Test Drive
14:45 Final Thoughts - ยานยนต์และพาหนะ
From a fellow 1995 Astro lover, I apprecicate younger people loving and keeping them going! Much respects!
Always keep the fuel tank half way full to full, this keeps the fuel pump cool.The fuel pump on these overheats and they are expensive to replace.
good advice , I keep mine half full just to make sure I have gasoline if the power goes out and pumps guit working, lol .... bonus .... keeps condensation down in tank also.
Just replaced mine and now with a proper seal it smells like gas inside the van.. it's a safari
Highly recommend tightening the torsion bar bolts about 4 turn really help me with body roll and just a all around better ride
Easy to follow with your instruction….will start doing the repairs you mentioned beforehand. Thanks again!
Just binged this series up till now! Awesome stuff going on and so much helpful tips and tricks. Recently got a 01 safari from my grandpa and its been a bit of a project car lol I haven't been able to work on much of the interior build but have the same idea of setting up a camper van in the future. This video and your other one on general issues of this kind of van have been the most helpful at the mechanical side. I have alot of this same process to go and will have your video next to me to pass the inspections! Great content, keep it up!
Hey! Thank you Jake! I am glad they videos were helpful! If you have any questions with the future projects please do not hesitate to comment on the video or message me directly on Instagram @Automotivate_
Bro your doing a great job here is another hot tip only use silicone between the removable part and gasket as it makes it easier to clean the gasket off later. Non removable parts are usually very difficult to clean because there not removable so must be cleaned in place. Usually standing on your head! Just saying keep up the great work!!! Love it!
Next time you flush the rad/ coolant system,, get a piece of hose on the nip of the petcock . Then hos strait way to empty jug. Save you a ton in cleanup
Nice work. From a Astro van owner to another Astro van owner
Informative and well done...A great helper is always a + and you had a goodun
Pay close attention to the gap between the bottom of the grill and the top of the front bumper! I put my 2001 on a two post lift, the front bumper was in contact with the grill and twisted upwards! When I lifted the van the bumper dropped and a gap of over an inch appeared! I checked and the two front sub frame mounts are totally rusted free from the body! Time to junk it I guess!
Thanks for videos .. helping me with my 05 maintenance
For what it was, The paint job works well . Best of luck to you, and your best half.
Thank you interesting to watch. great job on camera angles and lighting.
Just got a 91 astro van gonna start doing everything your doing thanks bro for the info
The fuel filter and fuel pump information was great,reaiiy helped to know exactly how and where to cut the hole. I also want to turn the Van into a camper.
Great videos man!! I have a 99 safari and im learning a lot!! 🙌
Heck yeah man!!
I have a 99 Astro and these videos give me more information on my vehicle and more confidence in working on it myself.
i appreciate you and all your videos 🤘 keep em coming 🙏 🙏🙏
I appreciate it 🙏🙏
Thanks for the great videos man I have a 94 astro I just got.. probably from a addict too 🤣. The way you say krud cutter is cracking me up.
lol, seems like most of the run down Astros came from the same person. Appreciate it. I have moved all my new Astro content to another channel if you want to follow the progress without other content flooding your home page: TH-cam.com/BuildsUnited
I just replaced my distributor on my 02 chevy astro! And yes I was stranded on the beach in nor cal! Fun stuff
I say that isn’t the worst place to be stranded! Glad you got it up and going again 🙏
Always use safety glasses. It sucks having small pieces of rust and dirt get into your eyes.
THANK YOU FOR WHAT TO DO ON THIS VAN. WE ARE LOOKING FOR A 2005 ASTRO VAN. WE HAVE A SCOOTER AND WHEELCHAIR TO HAUL AROUND SO THIS GIVES US AN IDEA OF WHAT TO FIX.
Wear long sleeve shirt and full length pants. Short shorts is for beach volleyball, not working on a greasy van. You donned white gloves to r&r the crank sensor and walked away with a greasy forearm. Appreciate the video none the less. I've a 99 Astro.
I am fully aware, but I would rather wear “short shorts” in the heat. I typically take a shower when I get dirty.
Hi I just wanted to comment and say thank you! I have no clue on any mechanic thing other than put air on my tires or put fluids. I’m working on a 1999 chevy astro van myself it is my dads car he has leukemia. So this is a project I want to complete and for him to feel proud. It has only 131xxx miles and it runs well no issues at least from what I can see but I will be changing everything your suggesting well just because I don’t want any issues later on. And I know he hasn’t done anything to it in a while. Anyways wish me luck! And thank you again for the video!
You got this Veronica! Be patient and don’t rush through anything is my biggest piece of advice.
If you have any questions along the way message me on IG: Builds United
You got this. Your father will be very proud.
Excellent video!!!! Congratulations
If you put a beaded silicone on the rotary cap where it seals to the distributor is self just along the bottom edge and let it dry you can stop it from allowing moisture and water into it.
Boss video. Fun to watch
You have an Astro. You will definitely get stranded on the side of the road again. I have had Astros for a very long time and it is a love/hate relationship.
I love my astro.
Thank you bro.
Thanks and awesome stuff. You’re nuts for doing all that. Haha
I'am Your Newest Subscriber Great Videos. I Just Bought A 1995 Astro Jayco Conversion Van 115k Miles Rustfree Florida Van
Enjoying the content man!!!👍👍🤙 Astro community!!!!🤙🤙🤙🤙😏✌
Ayyy thank you man!!
Whispers "Krud kutter" Best part of the whole video
😂
Hi! good job :) you have nice, cheap cars in the US! Greatings from Poland :)
Welcome and thank you 🙏
Prices of cars in the US is pretty good. We are lucky.
95 Chevrolet Astro Van VIN W stalls. Removed plenum found injector electrical connector damaged and broken. Bare wires dangling pulled from injector. Back to Napa for a injector electrical connector. Installed new injector and electrical connector, put it all back together Chevrolet Astro Van running better than brand new!
Love your content man & your funny too Lol
I appreciate it 😁
Dawn dish soap and water in a spray bottle work great
I have a 02 just replaced the radiator today!
You putting a roof vent in, too? Great work on the Astro van, very knowledgeable with mechanics..👍🏼
I am planning on it, but I’d like to invest into an electrical system before I do so.
Hey I have a 99 safari all 4 off the back windows have popped out and I then all secured with duck tape. Any recommendations on how I can get those fixed?
Go ahead and replace the intake gasket if you plan to do any long road trips.while you've got that stuff apart..do a tune up and use Taylor plug wires.cheaper than a set of a.c. delcos( which are way better than your local parts stores)and you will never change them again.ive got 2 sets on different vehicles.both have over 150k miles on them.
😍😍😍😍😍😍😍😍😍😍😍
I really like the video
Keep going buddy 💓
🙏🙏
Thank you!
Good Job
Thanks Michael!
Hello.. The fuel pump for my Chevy 1999 model just got damaged. How do I get a good replacement
Might want to consider getting 1/2” drive Ryobi impact gun. Makes getting tires off very easy and fast. While you are at it pick up Ryobi tire inflator to complete your emergency tire kit…
Don't forget a tire plugging repair kit. Mine saved me at least 100 times.
Proper way to do lug nuts it to push down with body weight and not pull up with legs/back
Hey, you have some great videos and seem knowledgeable about a variety of cars. I'm curious though, how did you learn so much abt vehicles? I'm trying 2 learn how to fix cars myself since I'm tired of lemons&expensive repairs.
Hey there! I appreciate it. It all started with my first car, 1976 MGB. Bought it broken down and with a bit of help from my dad to get it running and a friend who also owned an MGB helped me keep it running. I then continued the trend of driving cars that need work. I guess I like torturing myself, but I do end up learning a lot that way. Just dive in! TH-cam is the best teacher for most things as a DIYER.
@@AutoMotivate that makes a lot of sense & I agree TH-cam is amazing! Thank you for response & all the vids. They help a lot👍
What is the cable your wife is holding at 13:25? Cruise control? Mine is loose like that too. Thanks
SPASIBO !
i had my crank sensor go out and it didnt show me any code at all....i took me a couple weeks of messing with the van and replacing many sensors until i got to this one and it simply started right up.....
You saved a lot, lot, lot of money doing that all yourself.
Awesome video you have a new Sub. i have a quick question , i just bought my 2nd GMC Safari the 1st one i still have but built it with all wood , this Safari i want to build with all shag carpet , but i watch ALOT of youtube videos about vans & none or almost none build with carpet , do you know why , is there a legit reason why people don't build with carpet on walls and ceiling ? like moisture or hard to clean , or is it just personal preference if you can answer this would be such an amazing help thanks man keep the great videos coming.
Hey!
I appreciate the support, friend!
From what I could gather, and the reason I took the vinyl flooring route is the ease of cleanup. The carpet on the floor collects a lot of debri, dust and if you spill a drink, it wouldn’t be easy to clean up.
Imagine trying to vacuum the floor.
I like the ease of cleanup. I can easily sweep out the dirt after I camp and such.
@@AutoMotivate Thanks for the reply & help , i get the whole cleanup thing that would be annoying , maybe I'll just put carpet on the walls and ceiling , unless that would be bad as well , not sure about moisture , but i do see how wood through out the van would be so much easier. keep up the great videos #vanlife #forlife
I think the carpet on the walls and roof would be fine but it you would still have an issue with cleaning it thoroughly.
Carpet collets smell, dirt, and dust.
If you can get more of a fabric instead, you’ll be better off imo.
I’m just thinking of the long term issues and such
@@AutoMotivate thank you yeah i didn't think of the possible smells yicks yeah i think i might just do wood seems so much easier thanks again you been a great help i'm not to camera smart with video taking lol but i might try and learn and make videos of it.
@@BT-dl8kq thank you so much for the info , its very helpful i didn't know about that material similar to carpet, that is awesome i'll def. try that thank you again.
To avoid injury breaking the lugs loose, STAND on the breaker bar.
If you have a straight back and use your legs it's safer then your proposal. 100%.
Yep, Pancake disease very common on the Astro vans... Just replaced distributor cap on my 2005
Luckily fixing them isn’t very expensive and relatively easy!
Distributors are designed to last the life of the engine. GM engineers had no idea at the time that these 4.3 Vortecs were going to last so long. Replaced the distributor in my -99 Sarfari at 410 K and my odometer has just passed 536 K.
The distributor cap?
Why didn’t you replace the water pump too?
I was 'mirin' that quad then came that pistol squat.
Gotta throw my other passion in these videos here and there.
You need a steel pipe slid over a wrench handle you can loosen w.2 fingers. You need to clean that motor badly!
One question. It seems you are changing out parts but not mention why you are doing so. Like the rad and the master you mention but never say why you are doing them. CPS also. Seems the van cranked both before and after the change. (?)
Just preventative maintenance. The previous owner did not take care of the van and it sat for a long time. Would rather change the rad now instead of the possibility of it going bad during a drive. The CPS is just a common fault area and cheap enough to change.
"Krud Kutter"!!!
CLEANING ALL THE GREASE OFF THE ENGINE WILL ACTUALLY MAKE IT RUN COOLER! SO KRUD KUTTER, KRUD KUTTER!!! AND SOAPY POWER WASH (COVER ELECTRONICS) THE BLAST THE H-LL OUT OF IT!
FYI is WAAY smarter to use gravity to push DOWN to use gravity and body weight to break lugs free.
I’ve removed many lugs. Sometimes lugs are so tight that using your bodyweight simply doesn’t work. It also depends what kind of tool you use. The cross bar you would not be able to remove the lugs with your body weight. The breaker bar, you can control the removal of the lug nut by using muscle you can control instead of trying to sit on the bar.
@@AutoMotivate Using your foot and body weight is the way smarter way to break them free. Mechanical work and working out are 2 different things. Recommending people pull up is just plain wrong. No offense intended but astros have a huge cult folowing of very knowledgeable people. No pro mechanic or tow truck guy would try to do a squat to loosen lugs. (I am a 22yr mechanic and motorcycle racer sidenote)
@@smoknjoe73 I appreciate your opinion. Using proper form, you can pull way more than your body weight if need be. Straight back and using your legs, you will not have any issues. Most mechanics do not understand the anatomy of the body, which is why they advise that. However, some nuts are torqued more than the weight of someone.
Literally to get lug nuts off I just put it straight and stand on the ratchet your body weight is enough to break it loose
I have the same van and problem
you forgot to put the rubber gasket piece that goes inside the brake master cylinder!
😂😂 oh great. Luckily I haven’t seen any leaks so far. I’ll keep a closer look now on. The kit didn’t come with a new gasket. I’m sure if it needed it, it would have, right?
@@AutoMotivate no its supposed to be moved from the old one
Auto zone or O'Reilly have parts
Hmm Hmm Hmm Tara 🌹🌹😉😉
Break nuts loose correctly or you will break your nuts.
I always step and push the braker bar down with my weight. Dont pull it.
You're awesome dude. Everything you say is the stuff I think when I'm working on stuff. "AND ITS JSUT GONNA PISS ON ME." lol
Exactly! Or if you pull, do it with good form. Last thing you want to do is hurt yourself while working on a car. I still have a lot to learn, but I can share tips along the way.
Lmao, I didn’t expect it to go everywhere 😂
Thank you for the appreciate my friend!
* crud cutter *
After Greetings I hope, my friend, to do the translation system for the Arabic language We are with you with support and encouragement Thanks, monster 😇
Thank you my friend who speaks Arabic 🙏 hope you are well and safe!
I wanna buy an Astro that runs if you all know of one.
Cheryl astro van money lol
Your editing is simply too frantic, I have no idea what you are trying to do. SLOW DOWN!