Man you have saved me! I accidentally wanted to code the abs module but wrote it wrong and i did not take a photo. Searching and searching i watched your video and tried your software code and guess what? it worked!!! thank you very much
Hi, it didn't work for me unfortunately. I did everything the same, only that in "Basic settings -04" in the drop-down menu I did not see "Steering Angle sensor G85 alignememt" but "Adjustement of ESP -Sensor Unit (G419). And when I follow all the steps, the error continues. 😔. Thank you
Hi i have a audi a3 2010 the steering rack was replaced and then the yello steering light is on the dash board and the abs light. Will this work. Mabey the steering angle snesor is out. Any help would be good i have the vcds machine. Thanks
Please help me , my audi a4 B8 2011 was replaced steering box there i turned on this step light vcds dir has to calibrate the steering angle but it does not work already tried everything and it is also licked system function test
Hi, when I'm trying to access ABS module with code 40168 I see an error "Access Denied", then I tried to find and enter other codes, and anyway I see another error "37 Required time didn't pass" Abs module MK60EC1. Any solutions or ideas?
Hi maybe vcds cable main chip do not support because china copy i knew have 2 or 3 different main chips, and some cable do not suport all blocks to open
Enzo herrera because i removed all steering wheel to resolder releys for ignition where problem is but in this case master who removed steerring wheel turn wheel too much in one side and broke steering angle
Hello guys, anyone can help me, my car showed code 00778 after replacing clock slip squib ring and stating that steering angle sensor defective and no or incorrect basic setting/ adaptation? and showed yellow steering light.
HELPPPPP !!!!!! Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi a6 c6. Anyone?
Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi A3 2006 model
@@ZDarjus i do 7 times, ITS posibile to mess something up? To destroy something when i do this steps? I Forgot to mention i have ESP light on and i think 1 ESP rear right bad
@@miricaalexandru5432 If you make diagnostic and have same fault codes it should help, if you see ESP light only and make this you don't know what you are doing. Because i think you don't know what is ESP
Дякую, Вам. Гарна робота.
Спасибо тебе,добрый человек👍👍👍
Greetings from the USA! Thank you for the video, very helpful!
Спасибо , получилось!!!
Thx mate, a big help for me and nice music as well.
Fantastic, thank you so much
Спасибо за информацию 💪💪💪
Great work . Very clear information . Thanks for this 👍🙏
you are welcome :)
Man you have saved me! I accidentally wanted to code the abs module but wrote it wrong and i did not take a photo. Searching and searching i watched your video and tried your software code and guess what? it worked!!! thank you very much
Suhejb Qazimi you are welcome :)
TOP video BEST on TH-cam BIG THANKS :)
Thank you. It's worked perfect for me 👍
Thank you very much!
Thank you bro !!! You save my life !!!
Post
I got you thanks for this video
Thanks............and Well done
very very good...than; you
Мужик! Огромное тебе спасибо! У меня все получилось! Если бы не это видео, у меня уже руки опустились...
Пожалуйста
Больше спасибо, помогло
andrei marin pazalusta
Thank you
Hallo, thank you for the video ...
Mnezo sa iti dea sanatate ca numa nu am reusit. 👍😂
Nice 👍👍👍👍👍👍
very good tutorial tnx :D
you are welcome :)
Top... ajudou mt
Dziękuje. Gracias. Thank you
Tomasz Żuk Prosze :)
👌👍
Thank you😮 work in🎉
💪👏
소중한 정보에 감사드립니다.
Glad to help you :)
What if i centerd the steering wheel but it is not 0° on vagcom? thas my problem...
So I got to hook my scanner to a laptop for this?
Is the security code the same for Audi A3 8p
Hi, it didn't work for me unfortunately. I did everything the same, only that in "Basic settings -04" in the drop-down menu I did not see "Steering Angle sensor G85 alignememt" but "Adjustement of ESP -Sensor Unit (G419). And when I follow all the steps, the error continues. 😔. Thank you
Will this work for audi a4 b8 with same problem ESP off when turning?
Yes shure
Hi i have a audi a3 2010 the steering rack was replaced and then the yello steering light is on the dash board and the abs light. Will this work. Mabey the steering angle snesor is out. Any help would be good i have the vcds machine. Thanks
First you should check for Fault Codes and if Fault Codes same as mine then yes this will work
Hi thanks for reply. It worked lights gone off thanks for the help.
Hii question i have audi b7 a4 does this work with the lite version?
Hi cant say because dont have lite version if you have try if this version have same functions
Please help me , my audi a4 B8 2011 was replaced steering box there i turned on this step light vcds dir has to calibrate the steering angle but it does not work already tried everything and it is also licked system function test
If you replaced all stearing box it not help you need adaptation first it can be done with other program like FVDI Abrites or Audi dealer
Would this work on a 2009 A4 Avant? B8/8.5
Hi yes sure but if same fault code
Hi, when I'm trying to access ABS module with code 40168 I see an error "Access Denied", then I tried to find and enter other codes, and anyway I see another error "37 Required time didn't pass" Abs module MK60EC1. Any solutions or ideas?
Hi maybe vcds cable main chip do not support because china copy i knew have 2 or 3 different main chips, and some cable do not suport all blocks to open
вопрос. С Audi a3 пройдёт это? точно такая же ошибка с таким же номером.
Alexandro juk должно пройти таким же способам
when I get to the step with reading the sensor g85 at degrees it shows me 0 in any position is it because of the sensor not reading
Razvan Ionut yes probably flex sensor broken faulty
Cum ai rezolvat problema?și la mine e la fel
Why did the steering angle go bad?
Enzo herrera because i removed all steering wheel to resolder releys for ignition where problem is but in this case master who removed steerring wheel turn wheel too much in one side and broke steering angle
Hello guys, anyone can help me, my car showed code 00778 after replacing clock slip squib ring and stating that steering angle sensor defective and no or incorrect basic setting/ adaptation? and showed yellow steering light.
Nondalelo Lone try to drive 50m and turn wheel to left after that turn wheel right and then try, maybe faulty angle sensor replaced if used
Nondalelo Lone or maybe you do not correctly set angle sensor
HELPPPPP !!!!!! Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi a6 c6. Anyone?
Dailius Abezgaus you steering wheel flex cable maybe broken
will this work on Audi a5
Yes it will work on Audi A5
Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi A3 2006 model
I have exactly same issue. Can someone who knows tell us what to do?
PLS help me, i do what you do and now my steering wheel îs very hard
its not possible carefully check video and make one more time
@@ZDarjus i do 7 times, ITS posibile to mess something up? To destroy something when i do this steps? I Forgot to mention i have ESP light on and i think 1 ESP rear right bad
@@miricaalexandru5432 If you make diagnostic and have same fault codes it should help, if you see ESP light only and make this you don't know what you are doing. Because i think you don't know what is ESP
@@ZDarjus no, i have same fault +esp light on
@@miricaalexandru5432 what do you mean 1 ESP rear right bad ?