➥ How to renovate my old house th-cam.com/video/EbKQF-NstcA/w-d-xo.html Playlist DIY Home Improvement th-cam.com/play/PLQJGHOK40fH_ujAXKWHTGGV8kDQcBAqwy.html 💟 more on site ➥ learn-share.net/go/diy-projects/
Thanks for the great video. Manual screwdrivers for the win for me. Takes more time but the screws will go in a lot more accurately with virtually no risk of damaging the board. Also, go easy with the nails. As you show, pretty easy to drive the nails with a small hammer. I've never needed to use PVA glue with these products but if you do then "less is more" is the way to go.
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better th-cam.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
3 x wraps of PTFE tape around thread on legs.This beefs up the thread joint .And silicone the leg insert to their bases .Helps to stop them dropping off when moving around !
you did a great job man! i honestly dont know how people are frowning on the power tools how else is it expect it done they clearly have never had an ikea kitchen installed at there house by ikea's installation company. A small kitchen needs to be installed in one day, a medium kitchen in two days, and a good size kitchen in three days at about 20 cabs and its rear to go at four day it would have to be like 30 cab install but non the least it wouldn't be possible without power tools there is no way, it would take a considerable amount of time to build all those cabinets with a screw driver. And those who base them self and say its in the book, sorry using a square when your are putting in the nails isnt in the book and yet if you whant thing to smooth in an install you need to square your cabs otherwise it raises problem.
Nice video for beginners. It's very standard Ikea assembly like the Billy though. Now comes the dirty work. How do you get these on the wall? I'd like to get the 80cm wide floor drawer cabinet. Do they have to be attached with rails in the wall? I was told they can't just stand on the feet. How many screws do I have to drill into the wall? What's the screw diameter in mm? Do I need wall plugs? I'm just a tenant so I'd need to know those details for the landlord. I can't drill too wide and deep. Any hint is very appreciated. Cheers mate!
+R2BCH2 Hi. Yes with rail is more secure and leveling easy mounted. For 80cm in a solid wall 3 screws with plugs (doplets) 4x50mm should be enought. Or 4x35mm is ok. Soon i will upload a video of ikea kitchen in 10min assembly.
The backing board is quite thin so the nails give support and help to keep the cabinet square. I would also use a small amount pva glue to stick the backing board in the slot.
Doing the assembly on the floor is like work in the stone age. Kills your knees and back in a couple of hours. I use two tables in L, one for tools and hardware and a bigger one for rest of the stuff. I can work for 6 to 8 hours.
➥ How to renovate my old house th-cam.com/video/EbKQF-NstcA/w-d-xo.html
Playlist DIY Home Improvement th-cam.com/play/PLQJGHOK40fH_ujAXKWHTGGV8kDQcBAqwy.html
💟 more on site ➥ learn-share.net/go/diy-projects/
Thanks for the great video. Manual screwdrivers for the win for me. Takes more time but the screws will go in a lot more accurately with virtually no risk of damaging the board. Also, go easy with the nails. As you show, pretty easy to drive the nails with a small hammer. I've never needed to use PVA glue with these products but if you do then "less is more" is the way to go.
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better th-cam.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
Great job well done 👍😊👍
3 x wraps of PTFE tape around thread on legs.This beefs up the thread joint .And silicone the leg insert to their bases .Helps to stop them dropping off when moving around !
I don't understand the down votes, you did a good job.
+Kenneth Williams Thanks Kenneth, people mostly of them don't see things like they should ;-)
tu fai pour monter
uae
+learn share yz de 7t70
. bu63zsyuuyi8pppp00000 kg 8tytttyt088
I downvoted because he didn't show the whole assembly. In particular, the legs attachment and wall mounting, which were the parts that I came for.
you did a great job man! i honestly dont know how people are frowning on the power tools how else is it expect it done they clearly have never had an ikea kitchen installed at there house by ikea's installation company. A small kitchen needs to be installed in one day, a medium kitchen in two days, and a good size kitchen in three days at about 20 cabs and its rear to go at four day it would have to be like 30 cab install but non the least it wouldn't be possible without power tools there is no way, it would take a considerable amount of time to build all those cabinets with a screw driver. And those who base them self and say its in the book, sorry using a square when your are putting in the nails isnt in the book and yet if you whant thing to smooth in an install you need to square your cabs otherwise it raises problem.
Hi how do u hang it to the wall I bought same but I couldn't hang it
Hardest part is hanging it on the wall with the bracket!! How do you do this
Thank you for showing.
félicitations pour ce très bon travail
Great work 👍🏼
Danke das du anderen hilfst
sehr toll
wonderful get more ideas fromseeing this viedo
wow can see the easy part - what about how to attach to the wall ??
th-cam.com/video/WmDyPJyud60/w-d-xo.html 👍🏻
How many did you assemble?! You was fast! I'll try that tomorrow, thanks for sharing 👍🏻😊
+Unazukin M With pratice, 10 minutes is very acceptable but take your time, no hurrys. I'll upload a video verry soon with the kitchen completed.
No wood glue in the dowel holes ??
Nice video for beginners. It's very standard Ikea assembly like the
Billy though. Now comes the dirty work. How do you get these on the
wall? I'd like to get the 80cm wide floor drawer cabinet. Do they have
to be attached with rails in the wall? I was told they can't just stand on the feet.
How many screws do I have to drill into the wall? What's the screw diameter in mm? Do I need wall plugs? I'm just a tenant so I'd need to know those details for the
landlord. I can't drill too wide and deep. Any hint is very appreciated.
Cheers mate!
+R2BCH2 Hi. Yes with rail is more secure and leveling easy mounted. For 80cm in a solid wall 3 screws with plugs (doplets) 4x50mm should be enought. Or 4x35mm is ok. Soon i will upload a video of ikea kitchen in 10min assembly.
How do you attach it to a wall ??
Watch this th-cam.com/video/WmDyPJyud60/w-d-xo.html
Good vid! thx!
Dao
nbn Andersson gosto muito do que.istou a vere
What’s the point of the small nails at the end ?
The backing board is quite thin so the nails give support and help to keep the cabinet square. I would also use a small amount pva glue to stick the backing board in the slot.
Doing the assembly on the floor is like work in the stone age. Kills your knees and back in a couple of hours. I use two tables in L, one for tools and hardware and a bigger one for rest of the stuff. I can work for 6 to 8 hours.
شكرا
три минуты в начале клипа вскрывал упаковку.....ну очень познавательно)))
Mrc
Детали на голый пол не кладут!
Berapa itu harganya
j aime ikea mais prudence sur les produits chinois 😕😕
Diese Montagemethode ist teuer und zeitaufwendig
Troppo scarso ci mette una vita per montare una cucina completa
lernt deutsch
No time.
dann maul
ttttn
Terrible video. Show us how to wall mount