I Can Mixx (retail mixer): amzn.to/32YBMkr (affiliate*) Rubber Coupler: amzn.to/3H5Kige (affiliate*) 2.5" Hole Saw: amzn.to/3u2kX2P (affiliate*) Portable Bandsaw: amzn.to/3HG5FEu (affiliate*) Bench Grinder: amzn.to/3bcTDCW (affiliate*) Multitool Grinder Attachment: amzn.to/3HE3iSY (affiliate*) *Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!
If this is not something that you use often and need a dedicated solution, just use the appropriate size hole saw for the connection between the drill and the hose reducer.
I highly doubt it, at least not with the size I used. Two things though: 1.) I would use a nyloc nut or thread locker, so the nut doesn't become loose over time. 2.) Ease off the trigger and slow the can down instead of letting go of the trigger and coming to a quick stop.
Nope, it seems to mix the paint really well but there is one catch, you need to be sure the ball is free before using the drill mixer. What I mean by that is, if the can has been sitting a while and you can't hear the ball inside, just give it a quick shake to dislodge the ball from the solids that had settled to the bottom. Also, the rod doesn't need to be that long, I was just trying to copy a retail version of the same mixer.
How well does it work to shake up the paint? I saw the "I can Mixx" on one of Adam Savage's videos and he mentioned the shaft was slightly off center. I'm planning on making one but not sure if I need to go off center or how much.
That's where I learned about the "I Can Mixx" too. I wouldn't have thought it could mix paint well just by spinning the can, but it does. I don't think having the hole off center is necessary. With the long shaft, it's impossible for it to be perfectly balanced anyway so it creates plenty of movement.
Pipe is measured by the inside diameter, so the outside of a 2" pipe is just under 2.5". The other end of the coupler is larger to accommodate the spray can.
Me too! Mine is a DIY version of one that is sold online and I didn't think it would work well until I saw a review by Adam Savage. The only thing I've noticed is if you pick up a can that has been on the shelf for a while, be sure to shake it until you can hear the ball moving. Then this spinner seems to mix it up the paint really well. If the ball doesn't move freely from sitting too long, the paint won't be mixed thoroughly.
@@vsvnrg3263 Ah ok, I understand now. My version is similar to one that used to be sold online. The only catch with mine is, if the can has been sitting a long time, you need to give it a few shakes to free up the ball before spinning. If the ball is free, the mixer works great.
@@Mikeattempts , i often need to use cans that have been sitting in my shed for years. i give the can a bit right-side up then give it a bit upside-down then back to right-side up to thoroughly finish the stir. go and check out his video.
I Can Mixx (retail mixer):
amzn.to/32YBMkr (affiliate*)
Rubber Coupler:
amzn.to/3H5Kige (affiliate*)
2.5" Hole Saw:
amzn.to/3u2kX2P (affiliate*)
Portable Bandsaw:
amzn.to/3HG5FEu (affiliate*)
Bench Grinder:
amzn.to/3bcTDCW (affiliate*)
Multitool Grinder Attachment:
amzn.to/3HE3iSY (affiliate*)
*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!
Pretty cool! A shorter rod won't flex and break, and makes it alot less awkward to use, as in butt the drill chuck up against the bottom.
Yeah, you're probably right. I was just trying to make it similar to the one you could buy, which has a longer rod.
I think the commercial ones have that longer rod specifically so it will flex while spinning, to create the vibration to help mix the paint.
Hey smart. Thanks for sharing
Thanks for watching!
Nice job!
Thanks!
If this is not something that you use often and need a dedicated solution, just use the appropriate size hole saw for the connection between the drill and the hose reducer.
Yep, that'd work too.
I like it. Very nice
Thanks for watching!
No issues with that threaded rod bending over time?
I highly doubt it, at least not with the size I used. Two things though: 1.) I would use a nyloc nut or thread locker, so the nut doesn't become loose over time. 2.) Ease off the trigger and slow the can down instead of letting go of the trigger and coming to a quick stop.
@@Mikeattempts Makes sense. Thanks for the quick reply.
@@89Mirageman One other thing, you've gotta make sure the mixing ball is moving around inside the can before putting it in the mixer.
My question is. Will the force just throw the ball that shakes it up against the can wall. Will it spin so fast that the liquid stands still….
Nope, it seems to mix the paint really well but there is one catch, you need to be sure the ball is free before using the drill mixer. What I mean by that is, if the can has been sitting a while and you can't hear the ball inside, just give it a quick shake to dislodge the ball from the solids that had settled to the bottom. Also, the rod doesn't need to be that long, I was just trying to copy a retail version of the same mixer.
How well does it work to shake up the paint? I saw the "I can Mixx" on one of Adam Savage's videos and he mentioned the shaft was slightly off center. I'm planning on making one but not sure if I need to go off center or how much.
That's where I learned about the "I Can Mixx" too. I wouldn't have thought it could mix paint well just by spinning the can, but it does. I don't think having the hole off center is necessary. With the long shaft, it's impossible for it to be perfectly balanced anyway so it creates plenty of movement.
I don't understand how a 2" inch coupler works here... all of my spray paint cans are 2 1/2"
Pipe is measured by the inside diameter, so the outside of a 2" pipe is just under 2.5". The other end of the coupler is larger to accommodate the spray can.
i thought the can needed to be shaken not stirred
Me too! Mine is a DIY version of one that is sold online and I didn't think it would work well until I saw a review by Adam Savage. The only thing I've noticed is if you pick up a can that has been on the shelf for a while, be sure to shake it until you can hear the ball moving. Then this spinner seems to mix it up the paint really well. If the ball doesn't move freely from sitting too long, the paint won't be mixed thoroughly.
ive know a better way. sixty five ford used a piece of drainage pipe, a cap and a bolt through the cap.
That's cool, it sounds like a similar design.
@@Mikeattempts , no. the can rattles loosely around inside the pipe. my local paint and panel shop was impressed with my version of it.
@@vsvnrg3263 Ah ok, I understand now. My version is similar to one that used to be sold online. The only catch with mine is, if the can has been sitting a long time, you need to give it a few shakes to free up the ball before spinning. If the ball is free, the mixer works great.
@@Mikeattempts , i often need to use cans that have been sitting in my shed for years. i give the can a bit right-side up then give it a bit upside-down then back to right-side up to thoroughly finish the stir. go and check out his video.