Hello Great video Thanks. I changed both front and rear brake pads and sensors for my GLC43 but I still get check brake pad wearing warning. Any recommendation?
@@kenkanfix Hi Thanks for answer. The sensor is new but when I pushed in I did not hear click although I pushed it in enough. Should I rotate the the connector? Should I use any scan tool to reset the computer?
@Ardy Kharabian hi, no need for scan tool to reset the brake sensor. There's no polarity on the sensor so it can connect either way. as long as the connection is good and it's not touching the rotors then there should be no warning light.
hi, I believe you need the new disc need to have the same max thickness and diameter as the original disc. you can get part numbers for your car from partsouq.com so you can shop around.
@@kenkanfix Maybe you know hot to test parking sensors with multimeter ? I have issue on one from front side, but I`m not sure which is defective. Thanks
@gnus333 hi, you can use a multi meter and set it to test resistance. if it is working, there should be a few ohms of resistance ( less than 10). goodluck
Hi, have a look at this link mbworld.org/forums/attachments/c63-c63s-amg/425929d1595264308-c63-amg-s-brake-install-torque-specs-u70-install-front-axle-brake-caliper.pdf
Again another really helpful video. I have followed both the front & back brake change videos. Would recommend
Thank you! Very useful video. Will do it myself next week.
Usefully 👍 have a great day for anyone who read this . From 🇷🇺 with love
Hello
Great video Thanks. I changed both front and rear brake pads and sensors for my GLC43 but I still get check brake pad wearing warning. Any recommendation?
hi, have you tried another sensor? I can only think it's not connected properly or it is faulty. 🤔 🙂
@@kenkanfix Hi Thanks for answer. The sensor is new but when I pushed in I did not hear click although I pushed it in enough. Should I rotate the the connector? Should I use any scan tool to reset the computer?
should I insert the sensor in the outer pad? It looks the I inserted to the inner pad.
@Ardy Kharabian hi, no need for scan tool to reset the brake sensor. There's no polarity on the sensor so it can connect either way. as long as the connection is good and it's not touching the rotors then there should be no warning light.
hi, the sensor is normally on the inner pad
Can I put the ventilated discs?, my doubt is that they are a little bigger, will there be a problem?
hi, I believe you need the new disc need to have the same max thickness and diameter as the original disc. you can get part numbers for your car from partsouq.com so you can shop around.
When I need to exiting fitting position ? After I changed brakes from both side or when I change brakes from side where is sensor ? Thanks
hi, after replacing both sides.
@@kenkanfix Maybe you know hot to test parking sensors with multimeter ? I have issue on one from front side, but I`m not sure which is defective. Thanks
@gnus333 hi, you can use a multi meter and set it to test resistance. if it is working, there should be a few ohms of resistance ( less than 10). goodluck
I’d like to know if you’ve used Torque Wrench and how many do I need?
Hi, have a look at this link mbworld.org/forums/attachments/c63-c63s-amg/425929d1595264308-c63-amg-s-brake-install-torque-specs-u70-install-front-axle-brake-caliper.pdf
Hi do you have a video for the fronts too? Cheers
hi, yes th-cam.com/video/Ou5uVH7XsMk/w-d-xo.html