My bit broke off in my anvil and I couldn’t get it out. I went to the Dewalt service center and they was going to charge me $85 plus tax to replace the anvil. That was a NO GO!! I bought the anvil with new washers, springs, and ball bearing from them. Watched your video and repaired it for $15. Thanks 🙏🏿 man.
i think so, dewalt is good but not as good as makita, makita even has been compared to metabo, but still in term of quality (not technology) is better makita and of course is more affordable
Your video helped me a lot. I used it when changing out the anvil, mechanism assembly, O-ring, gear ⚙️ ring, etc. but I didn’t get the nose cone assembly done. Can that make the bit holder wobble if it gets old and worn?
Hello, I have a problem with Dewalt DCF894 brushless. The impact driver is 3 years old and I noticed that he lost power when loosening the screws. Even if I tighten the bolt, moments after I can't unscrew it with an impact wrench. Any ideas?
Excuse me, how can I repair my drills? It keep lights on and then torn of and don't works any more and then I separate battery for 20 secunds and then I put it back and work at lest for 5 minute's, how I can repair them?, thanks I wait for your answer
Hai dear brother I want complet gear box with out motore pls so approx india Price and send me website To purchase it pls actually i am making wrench natbol machine
Little long....try speeding someparts up or cut out some of steps. Dont need to see how every screw needs to be removed or screwed back in. Try using paper towels to clean parts not paper. Its a bit loud on the ears plus paper towels will do better job.
My bit broke off in my anvil and I couldn’t get it out. I went to the Dewalt service center and they was going to charge me $85 plus tax to replace the anvil. That was a NO GO!! I bought the anvil with new washers, springs, and ball bearing from them. Watched your video and repaired it for $15. Thanks 🙏🏿 man.
Best video I have seen on repairing a DeWalt 1/4" chuck. Clearly shows the correct placement of the ball bearing and keeper spring..
Well detailed video, with fantastic zoom in for clear parts identification..makes such a difference..100%
Great video - thanks. I like how direct and quickly you go through the steps + your great accent!
Great video. Exactly what I was looking for. Thank you!
This is amazing. I love how he zooms in when working on smaller parts. Great video.
Thank you
excellent tutorial video .. thanks for uploading
Thank you
Thanks for the great video. I have to do this repair, and this was extremely helpful.
Happy to hear that
Nice work, thanks 👍🏻
Thanks
Many thanks my friend.....helped me out a lot !!!
Thank you
a very useful video, my one is the
Screwdriver head stuck in the chuck I am starting fixing my one now
Thank, great to know that!
Excellent thanks for all
Cool thanks you my friend
Good job bro thanks for the video
Ремонт бесщеточного ударного шуруповерта Dewalt DCF886 , замена корпуса ударного механизма и рабочего вала.
Tô gostando muito do seu canal
Sou do Brasil.
Thank you
DeWalt is one of the best power tools quality brands love them
what is the best power tool for you, in terms of quality and spare parts? makita maybe?
Makita is on top food chain ( very robust and good quality tools )
i think so, dewalt is good but not as good as makita, makita even has been compared to metabo, but still in term of quality (not technology) is better makita and of course is more affordable
Fuck that! Ryobi is the best.
😂🤣😂🤣
You didn't put any grease on the gears where it was dry and why not clean the whole tool?
I thought people didn't do this man you are a goat
Sorry, not got it why I'm a goat 😅
@@handyman7282 It is a slang. Search "G.O.A.T." - Greatest Of All Time.
Your video helped me a lot. I used it when changing out the anvil, mechanism assembly, O-ring, gear ⚙️ ring, etc. but I didn’t get the nose cone assembly done. Can that make the bit holder wobble if it gets old and worn?
Yes
A bit more lubricant on the anvil shaft where it goes through the front housing would probably have been a good idea.
LOL :)
comme elle a dit
Excelente precio
Don't forget put some grease
Thank you, it's need small amount of grease
Hello, I have a problem with Dewalt DCF894 brushless. The impact driver is 3 years old and I noticed that he lost power when loosening the screws. Even if I tighten the bolt, moments after I can't unscrew it with an impact wrench. Any ideas?
Donde consigo esos repuestos
já que abriu a máquina poderia ter feito uma limpeza geral, serviço feito mas serviço de porco
What size torques bit are the screws
Hello, if I remember correctly it is TX8 or TPX8.
Why did you need to replace the housing?
Hello, because it arroves with oil seal in it
What battery does this take please.
Dewalt 18V li-ion
Como se llama ese repuesto... Quiero compra el repuesto
Thank you
Hi man I have a dewalt impact drill what’s the name of the pieces for the drill......??
N236639
Ν078434
N078437
N114621
servicenet.dewalt.com/Products/Detail?isId=true&productNumber=DCF886B&selectedType=24981
dont use oil?
lubricant grease? why?
Because manufacturer not put grease there. Grease gets dust inside and hold them there...
Hi I want to buy a 20v dewalt impact wrench how much is it?
Abdul Wasi Noori Lowe's $99 brushless
What was the cost for replacement parts?
I was going to ask the same question. Too bad he won't give an answer.
Parts without housing cost about 5 Euros
@@lllottolll Parts without housing cost about 5 Euros
Pero póngale la batería a ver si sirve lokita
Excuse me, how can I repair my drills? It keep lights on and then torn of and don't works any more and then I separate battery for 20 secunds and then I put it back and work at lest for 5 minute's, how I can repair them?, thanks I wait for your answer
Sorry for late reply. First time heard about this problem. Did you tested drill with new batterie?
We’re bye the part
Hai dear brother I want complet gear box with out motore pls so approx india Price and send me website To purchase it pls actually i am making wrench natbol machine
Wasn't that too much grease
It`s not need lot of grease...
@@handyman7282 I think when it exceeds the limit it makes a little bit of resistance
@@badressam473 Yes, ot can be that.
SPRING RING
Where7
Dirty job
Why you don't cleans the others parts ?
So many advertisements.
You job is to dory en not taste of the drive es working properly
Like:)
Thank you
Isn't it ironic he used a drill ? To fix a drill ?
если он не из ссср я уже не знаю, кому надо чинить поломанные инструменты ?)))
Little long....try speeding someparts up or cut out some of steps. Dont need to see how every screw needs to be removed or screwed back in. Try using paper towels to clean parts not paper. Its a bit loud on the ears plus paper towels will do better job.
Did you hire him to make this video for you?
Clean up your work area man
Too much mumbling. Distracting speech patterns.
Thanks
Your welcome