Looks amazing. What about the turn signals when all lights are on? I've seen some other light bars that completely act as a turn signal (which I don't like at all). In your video it looks like the turn signal is only in the outer part of the lights, is that correct, so no lightbar that is used as a turnsignal.
Great video but the difficult part of putting the wiring loom in the hatch and through the rubber tube convienently skipped over this is not an easy install
Hi @markboulter3157, I didn't use the duct at all as its next to impossible to do that without risking a bit of damage. I came up under the seal at the top and cable tied the two cables. It's pretty much unnoticeable, unless you look directly at it. To get to the duct you have to come up through the gap between the headlining of the car which is not easy and if I were to do that I'd probably have a paid a professional
@@TeslaLightShows Yeah, man, this is the way. I just did the same and then came looking to see if anyone else had done that. I'm on a 2021 M3P so there was really little choice. But what a wonderful mod this is. People were making fun of me for doing it, but not after they saw the lightshow!
The camera doesn't move as part of the installation but the new light bar does obscure the top slightly... Nothing you don't get used to but just so you know 😁
The lights look amazing and the installation looks easy and straight forward, but I have few questions. Are these lights certified for EU market? Is there some limitation of 3/Y versions (like year of production)?
Hi Igor, yes on the certification.. you can order them at the checkout with the US or EU configuration... (Amber or red turn signals)... I don't believe there's any limitation on the year as they react with the native signal so you should be good to go. For info, I installed these on a 2022 Model Y.
Ive just taken this from their website... Compatible Model : This full-width strip taillight is specially customized for Model Y 2020-2023, compatible with both Intel Atom and AMD Ryzen CPU.
Hello. This made my right side of my Tesla light not turn on after install. The red brake lights and half the red bar don’t turn on but reversed and turn signal work. Any idea?
Are you sure you have the cabling correct... I had no issues on install with the light bar... Both sides of the bar need to be wired in, I'd check everything's in place and not loose.
That start up animation is awesome. Great video. Amazing job
Thanks a bunch!
Brilliant clip! The light display is so cool. Thanks for posting this.
Glad you liked it!
Thank you Simon! This helped me install it! Now I just need to install the bone rear and zebra from hansshow lol make a video please!
Amazing, a must-have upgrade for any Tesla, I love it!!! Great video
We agree!
Looks amazing. What about the turn signals when all lights are on? I've seen some other light bars that completely act as a turn signal (which I don't like at all). In your video it looks like the turn signal is only in the outer part of the lights, is that correct, so no lightbar that is used as a turnsignal.
Expected to see what they looked like during a lightshow 🤔
Great video but the difficult part of putting the wiring loom in the hatch and through the rubber tube convienently skipped over this is not an easy install
Hi @markboulter3157, I didn't use the duct at all as its next to impossible to do that without risking a bit of damage. I came up under the seal at the top and cable tied the two cables. It's pretty much unnoticeable, unless you look directly at it. To get to the duct you have to come up through the gap between the headlining of the car which is not easy and if I were to do that I'd probably have a paid a professional
@@TeslaLightShows Yeah, man, this is the way. I just did the same and then came looking to see if anyone else had done that. I'm on a 2021 M3P so there was really little choice. But what a wonderful mod this is. People were making fun of me for doing it, but not after they saw the lightshow!
Is there a way to disable the start sequence? very disturbing when the start sequence starts at every tunnel
Loop NBC cç
Does this affect the camera in back?
The camera doesn't move as part of the installation but the new light bar does obscure the top slightly... Nothing you don't get used to but just so you know 😁
Does it fit on MY 2024 ??
Yes 😁
The lights look amazing and the installation looks easy and straight forward, but I have few questions. Are these lights certified for EU market? Is there some limitation of 3/Y versions (like year of production)?
Hi Igor, yes on the certification.. you can order them at the checkout with the US or EU configuration... (Amber or red turn signals)... I don't believe there's any limitation on the year as they react with the native signal so you should be good to go. For info, I installed these on a 2022 Model Y.
Ive just taken this from their website... Compatible Model : This full-width strip taillight is specially customized for Model Y 2020-2023, compatible with both Intel Atom and AMD Ryzen CPU.
Anyone know if these lights are UNECE approved for road use in the UK and Europe?should be marked with an E moulded into the lense?
Hello. This made my right side of my Tesla light not turn on after install. The red brake lights and half the red bar don’t turn on but reversed and turn signal work. Any idea?
Are you sure you have the cabling correct... I had no issues on install with the light bar... Both sides of the bar need to be wired in, I'd check everything's in place and not loose.
Have you figured it out?
Yes the small wiring from the middle crosslight bar was faulty and was sent a new one and it works great now! @@J-J-TL
That’s great!
🌟Great video! Your a natural at making DYI videos. The lights are awesome!
Thanks @VegasTeslaLightShows! That’s the magic of video editing 🤪