Milos, I'm in the market for a low cost scanner . Is the Medit 600 the one to go for or are there any others such as Helios 600 you would consider ? thanks . Joe
Hey Joe, I didn't try that Helios, but if you ask me, i600 is the best buy scenner! And plus Medit support is more than amazing, that alone is worth the money!
Which scanners are you referring to? We also got the feedback that with more scan passes the data would be more accurate. But then you start getting bigger and bigger point cloud meshes that are harder and harder to process. So I think an optimized scan path is beneficial for all scanners.
@@leonlazic I was willing to make a note on field of view. Scanners like old generation of Trios, Itero, Aroal 3 have wider scanning area or option for wider scanning field which gives better precision and/or accuracy of full arch scans. This is my research based and not a hypothesis or preposition.
Hello, i hope you can help me with some information. I am having a real hard time scanning with my brand new i700, i don't know if it's my amateur technique, camera, laptop or all together. It takes me ~1h to scan maxillar + mandibular ( partials prothèses). My camera blocks like all the time and it takes a lot to refind the last scanned position. A couple of times I couldn't fill some "holes"( the palatine zone especially) and i couldn't resist it anymore and got back to the classic way. I run a i7 processor, rtx Nvidia (it came with the scanner) . Any idea how to make my life beautiful again, before smashing the caméra ?? Thanks
Hello. Is it possible to run exocad on a macbook? because I work with exocad, but I'm also busy making youtube videos. And widows systems don't have much rendering speed.
The main apps are here, I think they are working on the rest of the apps. But apps like temporaries, design, ortho, smile design are already here to download and use.
FIRST!!! My cable (i700) where NOT as short a yours. They're actually gray (haven't measured them though). PS: why didn't you compare using Medit Design? Instead of Exocad?
Yes, a small inaccuracy on our part is that we showed the short black cable from i700w that is meant for the hub instead of the longer grey one like you described. Nevertheless I the information is still useful for anyone trying to get an even longer cable than 2 m like it's included in the box. As for the Medit Compare software, it totally escaped our mind. Both are great and both operate on a similar iterative closest point (ICP) algorithm ...
i600 skenira brze, do 35 fps dok i500 24fps, ali generalno ne treba se zanositi sa tom brzinom, jer je poenta skenirati kvalitetno a ne brzo.. posebno sto je u odnosu na analogno sve toliko brze da nam minut duze ne menja nista!
They are both great scanners, at the end all that matters is software around the scanner. That is why, at least in my opinion, medit is the best! I do all my work with medit apps that are working great with SprintRay 3D printer!
@@MLjubicic Thx for reply. I will Test the Medit with a MacBook Pro Max . In my Option Windows is good but for this Task M1 or M2 ist better. Also i dont want a big Laptop to carry around. In 2 Weeks i get the Medit for Test purpose and i will tell the results.
@@viceroyliht I have no doubt about Mac laptops, especially Macbook Pro Max, Medit is flying on Macbook air M2 with 16Gb of ram, that laptop costs around 1200Eur. Absolutely the best laptop for Medit!
All computers work just great, Medit for MAc is still in beta. I prefer Mac, but for example exocad doesn't work with Mac, so that should be taken in consideration.
@@hrvojebracic moze i preko medit linka, ali moze i klasicno, export, izaberes koji fajl hoces da li obj ili stl, i posaljes we transferom npr. MEdit je otvorenog tipa softver, pa nemas ogranicenja u tom smislu. Ja licno jos od bete koristim samo MEk, mnogo mi vise tako odgovara, jer mogu da radim dizajn i fotke i skenove sve zajedno na jednom racunaru i direktno saljem sta treba tehnici.
That's really interesting !!!! Thanks for sharing
Great, first and detailed comparison! Ko zna, zna ;)
Great video momci. 😊
Perfect work. Thx for information
Thank you 🙏🏻
Hi ,what about HD mode please in i600 ?
Are there already some apps like crown fit or castbuilder running on the Mac like you can implement them into the Windows version?
Milos, I'm in the market for a low cost scanner . Is the Medit 600 the one to go for or are there any others such as Helios 600 you would consider ? thanks . Joe
Hey Joe, I didn't try that Helios, but if you ask me, i600 is the best buy scenner! And plus Medit support is more than amazing, that alone is worth the money!
Thanks Milos . Great video by the way ! Top information
@@joe-vv4dc thank you Joe, really glad that uou liked it!
Is compatible with Invisalign?
Agree on scanning strategy but it's not that relevant with some scanners and software.
Which scanners are you referring to? We also got the feedback that with more scan passes the data would be more accurate. But then you start getting bigger and bigger point cloud meshes that are harder and harder to process. So I think an optimized scan path is beneficial for all scanners.
@@leonlazic I was willing to make a note on field of view. Scanners like old generation of Trios, Itero, Aroal 3 have wider scanning area or option for wider scanning field which gives better precision and/or accuracy of full arch scans. This is my research based and not a hypothesis or preposition.
@@ExodentalCADAcademyofNorth I am considering this scanner or the new shining oral 3. Which do think is better?
@@markj1232 which scanner? I can't tell anything about i600. i700 is a one of the best intra oral scanners. The same I could tell about Aoral 3.
@@ExodentalCADAcademyofNorth sorry I meant comparing the i700 to the shining aoral 3
Hello, i hope you can help me with some information. I am having a real hard time scanning with my brand new i700, i don't know if it's my amateur technique, camera, laptop or all together. It takes me ~1h to scan maxillar + mandibular ( partials prothèses). My camera blocks like all the time and it takes a lot to refind the last scanned position. A couple of times I couldn't fill some "holes"( the palatine zone especially) and i couldn't resist it anymore and got back to the classic way. I run a i7 processor, rtx Nvidia (it came with the scanner) . Any idea how to make my life beautiful again, before smashing the caméra ?? Thanks
Hi, sorry to hear that, scanning should't suppose to last more than minute or so... Firstly, can you write me specs of the laptop?
Hello. Is it possible to run exocad on a macbook? because I work with exocad, but I'm also busy making youtube videos. And widows systems don't have much rendering speed.
Hi, sadly no it is not possible, exocad works only on windows.
@@MLjubicic thanks
@@Spaydi. you're welcome :)
But does the Mac version have the same application range as the Windows version?
The main apps are here, I think they are working on the rest of the apps. But apps like temporaries, design, ortho, smile design are already here to download and use.
FIRST!!! My cable (i700) where NOT as short a yours. They're actually gray (haven't measured them though).
PS: why didn't you compare using Medit Design? Instead of Exocad?
Yes, a small inaccuracy on our part is that we showed the short black cable from i700w that is meant for the hub instead of the longer grey one like you described. Nevertheless I the information is still useful for anyone trying to get an even longer cable than 2 m like it's included in the box.
As for the Medit Compare software, it totally escaped our mind. Both are great and both operate on a similar iterative closest point (ICP) algorithm ...
Would you recommend Mac for i700?
Absolutely!
Zapravo ne postoji velika razlika izmedju i500 i 600 osim velicine i USB C kabla... ili brze skenira? 😊
i600 skenira brze, do 35 fps dok i500 24fps, ali generalno ne treba se zanositi sa tom brzinom, jer je poenta skenirati kvalitetno a ne brzo.. posebno sto je u odnosu na analogno sve toliko brze da nam minut duze ne menja nista!
Medit vs Primescan can you compare it ???
They are both great scanners, at the end all that matters is software around the scanner. That is why, at least in my opinion, medit is the best! I do all my work with medit apps that are working great with SprintRay 3D printer!
@@MLjubicic
Thx for reply. I will Test the Medit with a MacBook Pro Max .
In my Option Windows is good but for this Task M1 or M2 ist better.
Also i dont want a big Laptop to carry around.
In 2 Weeks i get the Medit for Test purpose and i will tell the results.
@@viceroyliht I have no doubt about Mac laptops, especially Macbook Pro Max, Medit is flying on Macbook air M2 with 16Gb of ram, that laptop costs around 1200Eur. Absolutely the best laptop for Medit!
Was your Mac M1 or M2 powered?
M1 PRO
So, Which computer works the best with I600?
All computers work just great, Medit for MAc is still in beta. I prefer Mac, but for example exocad doesn't work with Mac, so that should be taken in consideration.
@@MLjubicic OK, medit za Mac više nije beta, ali meni u ordinaciji exocad nije bitan. Tehničar preuzima file preko medit linka...ako se ne varam?
@@hrvojebracic moze i preko medit linka, ali moze i klasicno, export, izaberes koji fajl hoces da li obj ili stl, i posaljes we transferom npr. MEdit je otvorenog tipa softver, pa nemas ogranicenja u tom smislu. Ja licno jos od bete koristim samo MEk, mnogo mi vise tako odgovara, jer mogu da radim dizajn i fotke i skenove sve zajedno na jednom racunaru i direktno saljem sta treba tehnici.
Which cable do you prefer i600? İ bouth apple thunderbolt 4 pro cable but i can’t run i600 on my m1 imac.
Just look for a USBC cable with faster data transfer speeds, or I think the smartest way is to contact Medit as I did for a cable!
Aorus 15XC, is 11th CPU OR 12th ?
medit link 3.0 was going you can try it
I used M1 MACBOOK AIR 16GB RAM to run I600, it can also run 40FPS in HD
Hi, Aorus is 10th Cpu generation, but the most important thing is GPU :)
@@MLjubicic do you think it will run the same in an aorus 15g xc with the same characteristics? (I think it is less powerful)
@@Bcoinss The most important thing is graphics, then ram then CPU, write down the specs of that laptop so we can compare it!
Гйгуугйг