That was pretty cool! A reason I like Bosch is the 12v version impact driver is perfect for working on bmws involving engine work because the aluminum torx bolts they use it won’t snap the heads off them, the torque output works well with aluminum bolts.
German tools for German cars makes sense for sure! I really would never know that so thanks for the tip Adam! Do you have the 12v 3/8 impact or the impact driver? Overall I like the Bosch stuff so far but for what I do the lineup is a bit small. Lack of a circ saw is driving my ocd through the roof 😂. Thanks for watching Adam and thanks for supporting the channel! 🤜🤛
Great video, thanks. I have the 20-volt version of those HyperTough tools. I have used them a lot and they have worked and held-up pretty dang good. I cleared my lot of trees and brush with the reciprocating-saw, worked like a charm.
Some of the best bang for your buck imo is hyper tough cordless tools. And they are only getting better imo. I’m glad to hear you have been putting them to work and they are doing the job for you! Thanks for watching Tickyul
That Bosch combo came out more than 10 years ago. What do you expect. Still a great awesome little Driver stood the test of time and that design has been copied by many other brands already. Look at the hyper tough, the Bosch is its dad. 😂
Thanks for watching! I was seriously impressed with the hypertough as well! I still think long term Bosch will be better but for people who don’t use the tools everyday the hypertough probably isn’t a bad option. Thanks for the comment and thanks for watching!
Half hour of power lol it would be interesting to see These doing 20 screws back to back and check temps and battery level, I use my M12 for dry wall screws and when I get in the zone I DRIVE screws
That’s a great suggestion George! Thank you! I’ll need to figure out a way to setup a timer for that but I’m sure it can be done. I’m a late bloomer here and have really been trying to improve and hope to continue to do so. As for drywall screwing goes hell yeah bud. That’s one where you can get in the zone and add about 100 extra you don’t even need but it just feels right to add them 😂. Thanks for watching buddy and thanks for the support!
I had the whole m12 lineup well most of it. Sold it all because how the batteries always fall out while trying to use them. Great tools the batteries suck though. 18v’s are getting just as small as the 12v so I’m just calling it how I see it. Thanks for watching!
Absolutely. Under 50$ for a 12v brushless impact or drill. Very nice offering for budget minded people especially if you know what they are capable of doing. Thanks for watching!
That was pretty cool! A reason I like Bosch is the 12v version impact driver is perfect for working on bmws involving engine work because the aluminum torx bolts they use it won’t snap the heads off them, the torque output works well with aluminum bolts.
German tools for German cars makes sense for sure! I really would never know that so thanks for the tip Adam! Do you have the 12v 3/8 impact or the impact driver? Overall I like the Bosch stuff so far but for what I do the lineup is a bit small. Lack of a circ saw is driving my ocd through the roof 😂. Thanks for watching Adam and thanks for supporting the channel! 🤜🤛
@@themaintenanceman1 I have the brushless 1/4” hex impact driver
@@adamb50 the multi speed one? I have that also and love it so far 👍
@@themaintenanceman1 yea it has only two speeds on it
@@adamb50 yeah I find that a bit strange but for a 12v I get it. 👍
Just got off work, feed showed me this video! Awesome tool therapy to relax after a long day at work! 😎👍🏼 thanks! Also go Hyperthough! Go!
Carlos! I appreciate the support! 🤜🤛 enjoy your night brother and thank you for watching! The Hypertough packs an impressive punch for sure!
Great video, thanks. I have the 20-volt version of those HyperTough tools. I have used them a lot and they have worked and held-up pretty dang good. I cleared my lot of trees and brush with the reciprocating-saw, worked like a charm.
Some of the best bang for your buck imo is hyper tough cordless tools. And they are only getting better imo. I’m glad to hear you have been putting them to work and they are doing the job for you! Thanks for watching Tickyul
That Bosch combo came out more than 10 years ago. What do you expect. Still a great awesome little
Driver stood the test of time and that design has been copied by many other brands already. Look at the hyper tough, the Bosch is its dad. 😂
th-cam.com/users/shortshEboFiNe3lQ?si=anSC8Jp4-GoYnwXO
That's crazy to watch I own a few Bosch 12 v tools and 18 v Bosch but the 12 v hyper tough has me thinking thanks for sharing
Thanks for watching! I was seriously impressed with the hypertough as well! I still think long term Bosch will be better but for people who don’t use the tools everyday the hypertough probably isn’t a bad option. Thanks for the comment and thanks for watching!
Awesome video my friend 🤟🤟
Thanks you! And thanks for watching!
Half hour of power lol it would be interesting to see These doing 20 screws back to back and check temps and battery level, I use my M12 for dry wall screws and when I get in the zone I DRIVE screws
That’s a great suggestion George! Thank you! I’ll need to figure out a way to setup a timer for that but I’m sure it can be done. I’m a late bloomer here and have really been trying to improve and hope to continue to do so. As for drywall screwing goes hell yeah bud. That’s one where you can get in the zone and add about 100 extra you don’t even need but it just feels right to add them 😂. Thanks for watching buddy and thanks for the support!
18:04 OMG That's what she said failed.😁
😂😂
That was great
Thanks William! And thanks for watching! Enjoy your night 👍
Since when is 12v going by the wayside? Have you not heard of the M12 line
I had the whole m12 lineup well most of it. Sold it all because how the batteries always fall out while trying to use them. Great tools the batteries suck though. 18v’s are getting just as small as the 12v so I’m just calling it how I see it. Thanks for watching!
Love mine.
Which one are you rocking Lyle? And thanks for watching!
Hyperthough has come a long way, at least when it comes to Brushless
Absolutely. Under 50$ for a 12v brushless impact or drill. Very nice offering for budget minded people especially if you know what they are capable of doing. Thanks for watching!
Are you trying to replace the Canadian dude that went insane?
Who’s the Canadian dude that went insane? I’m unfamiliar. But either way I’m not replacing anyone. I am just doing my own thing.
@@themaintenanceman1C'mon , man. You're not fooling anyone.
@@guythecookingsam2588 I’m not trying to man
I have seen the 12 v hyper tough brushed version and that is trash comparing to bosch brushed
Absolutely agreed 👍
You sound exactly like Hurley from Lost
I have never seen that show Ken but I will take your wood for it 👍. Thanks for watching!
If you havent seen it dont start, you'll be on a streaming binge
@@kenromalino8557 lol I don’t doubt that. I know it was a huge show back in the day. One I’ll probably binge watch someday
Hay bud let's party you should be giving skate board review not power tools lol good luck bro
I’ll do what I want Andy. Have a great night skateboarding in your parents driveway.
Malaysia ehhh? Not in china. 😅
You know what I mean. 😂
@@themaintenanceman1 hahaha
@@chemicalspore a country in China yes 😂 but my brain don’t always work 😂. Thanks for the support brother! 🤜🤛🌈