thanks dude u are a genius. my mx 521 now working kept deferring correcting this no paper in tray issue until my xerox phaser gave up the ghost. thanks
For whatever reason I was skeptical this could be the issue. I washed them with hot water and dish soap and my printer started working again. Thanks a lot!
Mike, thank you so much. I was just about to throw away our expensive Lexmark X544 color duplex printer when the local service center here in Israel said that they probably don't have spare parts for this printer and anyway will only be able to consider repairing it at the beginning of next year because they are busy! As a last resort I decided to look for advice on TH-cam and came across your film. Within a few minutes the problem was solved. Thank you again.
Used same approach on my a similar printer. Used anti-bac & soap - worked like a charm. The rubber bands/wheels had directional grip so also had to be inserted the right way.
My problem was the clutch mechanism in between the 2 rollers wasn't engaging. I've pushed the 2 sides together and it's pulling paper for now, but if I tip the printer onto its side the other way the 2 sides fall apart again. I'm sure after a while it will work its way loose again.
Thank you, so much!!! Worked like a charm. My printer is a 410 ,not 310 but the solutions worked. I've had the "no paper" problem for more than a year and was ready to toss the printer out the window. I actually did try reaching under to clean the rollers with alcohol on a Q-tip but it didn't work. Never thought the rubber bands could be so easily removed and cleaned :). Bravo!
It solved the problem on a CX510de which was in the box for 2,5 years, when I unboxed it today, it wouldn't take paper, cleaned it with detergent and problem solved.
Very good information. - Thank you so much
Perfect!!!!!!!!!!!!!!
thanks!!!!, it works!, you are te best, thanks for sharing!!!
thanks i resolved with printer lexmark 810 de
My friend thank you i follow your advice and my printer work fine.
Worked great! It didn't work with alcohol but it did when I used dish detergent in warm water and a microfibre cloth. Thank you very much!
thanks!!! worked for me after just washing it with water.
Thanks! It worked for me. Washed the rubber rollers with water and kitchen detergent instead.
thanks dude u are a genius. my mx 521 now working kept deferring correcting this no paper in tray issue until my xerox phaser gave up the ghost. thanks
Cant belive this rollers could get contaminated enough not to pick the paper. The trick worked 100%.
For whatever reason I was skeptical this could be the issue. I washed them with hot water and dish soap and my printer started working again. Thanks a lot!
Thanks it’s work
God bless you man!!! I was a footstep to trow out my printer... lol... thank you so much!!!
Worked great on my CS410DN. Mechanism looks slightly different, but rollers are the same and easily removed. Thanks!
AMAZING tip thank you. Just FYI this works with washing up liquid and water too!
Awesome, what a simple fix! I just washed the bands with regular soap in the sink, and the printer started working again! Thank you! :)
Worked for me as well on a lexmark x543. Wouldn't have thought to do this, so thanks very much!
Mike, thank you so much. I was just about to throw away our expensive Lexmark X544 color duplex printer when the local service center here in Israel said that they probably don't have spare parts for this printer and anyway will only be able to consider repairing it at the beginning of next year because they are busy! As a last resort I decided to look for advice on TH-cam and came across your film. Within a few minutes the problem was solved. Thank you again.
This helped for my lexmark cx310dn as well. Simple to do.
Thanks, your advice was very useful!! You saved our printer from the recycle bin.
It worked! You are my little god! I used vinegar instead of alcohol...
Used same approach on my a similar printer. Used anti-bac & soap - worked like a charm. The rubber bands/wheels had directional grip so also had to be inserted the right way.
Thank you for pointing me to the problem. Although I did not use alcohol, simply rubbing the rings for awhile fixed it.
Thanks!
Excelent! Thank you!!! Solved my problem!!!!
It worked with my Lexmark 350d, I used vinegar instead of alcohol!
Thank you for sharing wonderful advice
This also worked for me. I used hot water and dawn detergent and then dried it and it actually worked.
Thank you for saving my printer - this worked very well for my Lexmark E250d!
Worked really well on my C2325. Thanks a lot!!
iam korean
I solved the problem
very very thank you
감사합니다
You are my hero Sir !!! Thank you so much from France !!!!
I can't believe this worked so well. Thank you!
Amazing!!! It worked for me too 🤯🤗
It worked! Thanks a lot :)
problem solved thank you!
My problem was the clutch mechanism in between the 2 rollers wasn't engaging. I've pushed the 2 sides together and it's pulling paper for now, but if I tip the printer onto its side the other way the 2 sides fall apart again. I'm sure after a while it will work its way loose again.
came back googling to find how to fix and see how I fixed it last time. was not disappointed. :D
Thank you, so much!!! Worked like a charm. My printer is a 410 ,not 310 but the solutions worked. I've had the "no paper" problem for more than a year and was ready to toss the printer out the window. I actually did try reaching under to clean the rollers with alcohol on a Q-tip but it didn't work. Never thought the rubber bands could be so easily removed and cleaned :).
Bravo!
what kind of vodka did you use ?
It works !
Thanks a lot...
Worked perfectly. Thank you very much.
Thank you! Worked perfectly!
it's realy worked, thx
Perfect! Thank you very much!
Worked great man, thanks!
thank you ! like a magic !
Thank you so much!!!!!
Thanks....nice :)
Worked just as you said it would...thank you.
what kind of alcohol ? vodka or what ?
Thanks.
It solved the problem on a CX510de which was in the box for 2,5 years, when I unboxed it today, it wouldn't take paper, cleaned it with detergent and problem solved.