just for future reference, you can take a voltmeter and test the coils or use a 9v battery and perform what they call the "pop test" and place pos to pos/neg to neg from batt to each coil and just touch it together, don't hold it on there, if it makes the speaker jump out the coil is good, that technique is also used to test speaker polarity
Neither matters when the voice coils are reverse polarity. Looks as though the coils are in parallel while one of the coils is pushing the other is puling. that's why the wire is jumping.
You didn't have go thru all that drama, you can test speakers by hooking them up to a AA battery. Instead of the wires going to an amp, take that end of the wires to a battery. Hold the negative to the batterys negative and when you touch the positive wire to the battery's positive you should hear a scratching sound. If you don't hear nuttin they blown. Thats it, simple as that nothing eise needed, works every time. Thought everyone knew this, admit its ghetto as funk but it works. Learned it back in the day prowling cars. Try it out, youll see what I'm talking bout.
Actually, if you touch the wire and complete circuit of current, the speaker pushes the cone out, or pulls in, depending if you have pos to pos and neg to neg, but do it backwards and it does the opposite. The more you know....
Just pissed me clean tf off u blew those speaker's u dnt kno what u doin never hook up audio with straight juice u to use to doin the hood way that's crazy all u had to do was cut the power off hook it up the right way and test them u ginna blow them every time doin it like dat dude
So my question is, why would you test speakers with other wires still connected???? this is some of the dumbest shit I ever seen it could have simply been wired wrong or either only one of the speakers were blown and shorting the amp!!!🤦🏾♂️🤦🏾♂️🤦🏾♂️
I'm guessing those were the Skar SDR subwoofers. There known for not handling much watts. It says 600rms and can't handle any more than that. I used to have a 18" SDR for my room and that subwoofer ended up blowing. If you like a good subwoofer for the price the American Bass XFL is nice and the NVX VCW v3. There's also a new brand out called Slapz car audio and those subwoofers are very good for the price.
Props for trying… some people just don’t need to fuck with tools or electrical. Do some research, and hone in on your tool holding/using skills they’re just hand tools not even power tools don’t let them beat you up. I guarantee those mf work and u just threw away a couple hundred dollars 💀😭 literally BLACK is always To black (NEGATIVE) red , copper, white ALWAYS (positive).
simple battery AAA, AA, C, D, 9V any one of those will do. it will tell you if you have the polarity connected the way it should be and it will let you know if the speaker is good or not.
No, obviously not touching them PERIOD,would have been the best coarse of action. My guy barely knows how to tie his laces. Practicing phase:2, he's perfected The Bunny Ears method.
Id unhook the wires jumping to other coils . They could still have plenty of life left in them just the polarity is making wires jump because its backwards
Please, have someone else hook them up. You have no buisness touching any electronical appliance. Not sure if that runs in your family, but I think I'd have it checked out ASAP.😂
They had them wired wrong. They were grounding themselves out. You should have tried 1 with just the 2 wires from the Amp and removed all the other wires.
Terminals on the box already melted, my guys amp ground is smaller than the power, I'm sure there's so much more shit wrong we can't even see. Research before you do installs people, this is how shit burns down. Oh btw you went thru so much shit that a multimeter or even a 9v battery could've told you hours ago
Yoo bro you dont know what you doing. If getting a spark you connect wires usually means a positive and ground a touching. You connected the speakers in reverse polarity. So you cant get any sound.
this is the main reason that i dont watch this type of installation, because its a backyard ghetto style. im not saying all back yards are junk, just me personally i dont trust it. i hooked up all my system from people that know what they are doing and just follow their lead on installation.
All this waiting of time to just find out they blown why eles would someone put them out by the road lol duh but anyways they throw away a good prefab bix them monsters in that classic the business
Hope you see this before you trash them. Look like the positive of one coil was connected to the negative of the other and vice versa. Thats probably why it blew. One coil trying to go up wile the other trying to go down
So... if you wire subs in series, you hook positive to negative, you can Google "subs series wiring". It doubles down the ohm load, and if you wire in parralel, the ohm load doubles up. Ie; 4ohm x2 coils in series, run 8 ohms, but wired parralel, 2 ohm, hotter, harder load. Audibly, barely noticeable, but very powerful.
This shit is hilarious. Millie Vanillie have no idea how car electronics work.
bro has some cowboy boots on...
im weak!!!!
one mans skarbage is another mans treasure....
sorry, i had to say it..
If they fried ...You could've smelled them speakers
yea them thangs stink real bad when they fried
he still should be able to smell it
That new chief keef album fire thx for putting me on my boy
just for future reference, you can take a voltmeter and test the coils or use a 9v battery and perform what they call the "pop test" and place pos to pos/neg to neg from batt to each coil and just touch it together, don't hold it on there, if it makes the speaker jump out the coil is good, that technique is also used to test speaker polarity
Neither matters when the voice coils are reverse polarity. Looks as though the coils are in parallel while one of the coils is pushing the other is puling. that's why the wire is jumping.
Facts @@MurderousMindstate
Yup they are definitely hooked up wrong, BIG FACTS!!!
You had them hooked up wrong my guy! That’s why the wires were jumping like that
They for sure was not fried. Jodie def had the wires backwards lmaoooo
😂😂😂 that’s what I said had black on red and just to the outside with thick ass copper to make it jump spark
Get one sundown x12 in spec box and it will washout those 2 15s.
A digital multi meter and just switch to the ohm reading so you can probe each coil. That'll tell you if they bad for the most part.
I agree 👍
We watchn ya outta StL Mane! Starkville-Maben Stand Up☝🏾
My man got them boots on like Mike Epps in that movie Three Strikes...🤣🤣🤣
This is a prime example of why people shouldn’t work on electronics because they think it’s easy. It’s not all just plus and minus, Techs get it..
Nothing is simple with sound equipment ever
But it is. Problem is he has his plusses minused.
You didn't have go thru all that drama, you can test speakers by hooking them up to a AA battery. Instead of the wires going to an amp, take that end of the wires to a battery. Hold the negative to the batterys negative and when you touch the positive wire to the battery's positive you should hear a scratching sound. If you don't hear nuttin they blown. Thats it, simple as that nothing eise needed, works every time. Thought everyone knew this, admit its ghetto as funk but it works. Learned it back in the day prowling cars. Try it out, youll see what I'm talking bout.
Actually, if you touch the wire and complete circuit of current, the speaker pushes the cone out, or pulls in, depending if you have pos to pos and neg to neg, but do it backwards and it does the opposite. The more you know....
Just pissed me clean tf off u blew those speaker's u dnt kno what u doin never hook up audio with straight juice u to use to doin the hood way that's crazy all u had to do was cut the power off hook it up the right way and test them u ginna blow them every time doin it like dat dude
So my question is, why would you test speakers with other wires still connected???? this is some of the dumbest shit I ever seen it could have simply been wired wrong or either only one of the speakers were blown and shorting the amp!!!🤦🏾♂️🤦🏾♂️🤦🏾♂️
Just switch those wires in your hand around homie 🤦🏾♂️🤦🏾♂️😂
Yall lucky that box didnt have 1 inch course thread screws😢
Tell me, how are those wired? Whats the final load for that?
That's box is straight fire wood
I was sitting here thinking why dude look familar ...Ole boy look dude off of destroying
You gotta put dem 15’s in the Monte Carlo mann😮💨
Ima get some for it
@@doinkslifestyle wire those subs properly man.
They are not dead
What up bro salute 💪
Got that 3000 watt amp in that pink💪🏾💪🏾
W vid man good work
Man you can tell these boys as contry as it gets lol
oh no grandma's Lamp Cord is used as speaker wire
😂😂😂😂😂😂😂 I said the same shir except it was grandmas vacuum
That audio pipe need to be swapped for atleast a skar jp or even pioneer brah asap
I wanna hear that pink one!
That's what I be rocking with skar
First time watching u bro, no hate obvi but that whole damn box looked fked up I wld try and rewrire and see what they do. Cuz that wiring was FKED
Why he wanna give me free subwoofers?
Cause they're BLOWN!
What a boy!
I'm guessing those were the Skar SDR subwoofers. There known for not handling much watts. It says 600rms and can't handle any more than that. I used to have a 18" SDR for my room and that subwoofer ended up blowing. If you like a good subwoofer for the price the American Bass XFL is nice and the NVX VCW v3. There's also a new brand out called Slapz car audio and those subwoofers are very good for the price.
Idk if it's worth it but I heard you can rebuild them
Props for trying… some people just don’t need to fuck with tools or electrical. Do some research, and hone in on your tool holding/using skills they’re just hand tools not even power tools don’t let them beat you up. I guarantee those mf work and u just threw away a couple hundred dollars 💀😭 literally BLACK is always To black (NEGATIVE) red , copper, white ALWAYS (positive).
Cali checking in
Lmaoooo 😂😂😂
Take all the wires off them test them
simple battery AAA, AA, C, D, 9V any one of those will do. it will tell you if you have the polarity connected the way it should be
and it will let you know if the speaker is good or not.
He had them on dirty power I had mine for like 4ys and they still going hard
Thay make a rebuild kit for em
😂😂that little azz box
Ohm reader would be the best option to test them out .
No, obviously not touching them PERIOD,would have been the best coarse of action. My guy barely knows how to tie his laces. Practicing phase:2, he's perfected The Bunny Ears method.
That box still good bro
Yes
@@doinkslifestyleDonkys suck😢
😂😂😂
Id unhook the wires jumping to other coils . They could still have plenty of life left in them just the polarity is making wires jump because its backwards
Backwards??
Aye kinfolks you do know they sell a recone kit for them scar 15s. They'll be just like brand new.
For the cost of the recone you might as well buy a new set
Yea I’ll buy new set. Thanks tho
Please, have someone else hook them up. You have no buisness touching any electronical appliance. Not sure if that runs in your family, but I think I'd have it checked out ASAP.😂
I got a 65 in tv like that...they thought it was blowed out but just needed to press and hold the reset button!!!!!
They just SDRs you get em new for like $80 a piece. Wouldn't put more than 600 rms to each one that's all they can handle. They cheap for a reason
This is just a user error moment and this is why skarbage has its name 😂
U should give me that box fr
Send them in warranty, well try too
Your lucky you didn't fry pinkys sound system doing that
And nothing. Nothing happened. Thank you for that.
you can use a battery check the polarity
its the skarbage commnts for me lmao
I want 4 of dem in atuned box
My brother always giving me free stuff 😅
bro put negative on positive and positive on negative
Or you can just touch the speaker in the middle if it sounds like something rubbing against metal they are blown out
Them one of skar entry level subs they should be like $80-100 each
Sounds about right they are Skar SDR should do great on a rp1200.1
If you put a amp bigger then 1500 watts its going to bñow quick im sure you have a bigger amp then 1500 watts
I’m confused bro why even take them…
😂😂😂‼️
Because like 2 months ago I got some from him but they actually worked. They didn’t Kno what they was doing so I thought the same
@@doinkslifestylefacts I can’t fault u at that…U win some u lose some…Following & Subscribed to ur page all the way From MIAMI FLORIDA
They had them wired wrong. They were grounding themselves out. You should have tried 1 with just the 2 wires from the Amp and removed all the other wires.
Can I have that box? Can you donate it to me?
I'll take them for sure
You should have took the wires off the speakers then check each coil on the speakers. The wires could be bad. The wires were jumping. Just saying bro.
Ima try that too. Real quick they looked good but same time never Kno
All you had to do was get it recoiled. That speaker is far from done magnet is fine cone is fine replace the coil
Them sdrs probably smoked
Those subs look out of phase
Terminals on the box already melted, my guys amp ground is smaller than the power, I'm sure there's so much more shit wrong we can't even see. Research before you do installs people, this is how shit burns down.
Oh btw you went thru so much shit that a multimeter or even a 9v battery could've told you hours ago
i need a box, if you’re willing to sell it😅
$65
@@doinkslifestyle bet! where you located? i’m in alabama
Ms,
Brandon
@@doinkslifestyle could you see about shipping it?
Kickers my favorite speaker what yall bang with
Sundowns all day
Man I got American bass. But is sundowns good I heard too? Just don’t Kno what kind
DD all day!!!
Avatar all day
Dd audio
Bruh thats not even speaker wire but even then nobody giving away 2 15s for free that actually work.
Some people do got heart and give away stuff that do work I have do it before
If not everybody should be handling car audio was a video 💀
That’s funny 😂
Yoo bro you dont know what you doing. If getting a spark you connect wires usually means a positive and ground a touching. You connected the speakers in reverse polarity. So you cant get any sound.
Can I have the box g
I would have bought them blown subs
U jumped them wrong to lower the ohms
Jus rebuild da 15s
Why rebuild SDR 15s
Ima buy some
Pinky clean
this is the main reason that i dont watch this type of installation, because its a backyard ghetto style. im not saying all back yards are junk, just me personally i dont trust it. i hooked up all my system from people that know what they are doing and just follow their lead on installation.
Those speakers aren't fried... yall didn't have them wired right!!!!! You just lost out on some good speakers smh 🤦🏿♂️
Smh Really guys/bro clearly you can see it was hooked up WRONG LMAO 🤣 L7CKY U DIDN'T fry ur system..... Anyone else see the problem
How much you want for that box
$65
@@doinkslifestyle ok cool I been looking for one
My guy let me do it you do not connect the negative with the positive Black wires are negative the other one is positive
Sorry dude! You don’t no what your doing! lol!
They can be re-coned
They fried them voice coils in them speakers
All this waiting of time to just find out they blown why eles would someone put them out by the road lol duh but anyways they throw away a good prefab bix them monsters in that classic the business
Those fuckers are good the wires where wrong on them try it with the wires off
Yea I kelp them and sold them
Next time check it with a 9 volt battery, If its good it will pop each time you touch positive
Hope you see this before you trash them. Look like the positive of one coil was connected to the negative of the other and vice versa. Thats probably why it blew. One coil trying to go up wile the other trying to go down
In fact subs might still be good... just wire them right lol. I'm screaming "hook it up to one coil!!!" When you took the wires off
So... if you wire subs in series, you hook positive to negative, you can Google "subs series wiring". It doubles down the ohm load, and if you wire in parralel, the ohm load doubles up. Ie; 4ohm x2 coils in series, run 8 ohms, but wired parralel, 2 ohm, hotter, harder load. Audibly, barely noticeable, but very powerful.
@keithhaynes5348 my bad I see it's wired correct. I didn't see where the wires cross. Try 1 coil by itself
Might can get em rebuilt hit up skar they might do em for free
86k views 1k likes..... I'm not one of the likes.
even if they were dead you could have fixed them
I kelp them when I realized . And sold them .
Just run it two way instead of 4
The speakers are wired wrong I'm serious
Recone them joins
What is you talkin bout?!? 🤦🏾 Rewire and try again man yall have me stressed
OH YEA THEY DUNN
No sound 😢
Wat u mean no sound ?
Their is sound he trippin @@doinkslifestyle
That box still good bro
@@kennymorris7650 true ima do some with it might see if I fit my Mc
Even if they did work, you did a lot wrong in this video