VW CADDY 2016+ Transponder Megamos Crypto AES. "VAG MQB". ID49 / Silca: ID88. Or (depending of the country and model version) Megamos ID48 precoded ("dealer key").
i tried for Jetta 2015 but wasn't succeed, Xhorse super Model key, first i greatened the remote for Jetta 2015, then generated ID48 to the chip, but Autel couldn't recognize the key i only was able to learn remote..... i'm not an expert can you please give me some tips ....i'm using Mini tool key and Autel KM100 +xhorse super model key...thanks
😂 adding a new chip via OBD when you have a working key takes less than 5 minutes on this vehicle. Why would you waste over 2 hours of your life on this? Xhorse is a waste of time when cloning, not had one that has said any less than 1 hour. Wouldn’t dream of waiting that long to clone a chip.
With loads of other tools, Autel, VVDI2, Zedfull etc. Also for cloning 48 chips much better and faster with KD-X2. Never waited more than 10 minutes for a 48 clone
Hi , with obd when adding key , no askin for pin code ?
Nice
I have a 2018 Cady, which xhorse key model should I use? Do I need the smart key with the orange foil?
VW CADDY
2016+
Transponder Megamos Crypto AES. "VAG MQB". ID49 / Silca: ID88.
Or (depending of the country and model version) Megamos ID48 precoded ("dealer key").
Hi.can a id48 chip be done via the obd2 port rather than cloning an existing master?
Hi yes you can clone from obd 2 port. Depending what machine you using
Can this machine be used as a obd fault scanner
Yes
i tried for Jetta 2015 but wasn't succeed, Xhorse super Model key, first i greatened the remote for Jetta 2015, then generated ID48 to the chip, but Autel couldn't recognize the key i only was able to learn remote..... i'm not an expert can you please give me some tips ....i'm using Mini tool key and Autel KM100 +xhorse super model key...thanks
Hi , feed back please ?i am confuse ! In this vidéo no reading of pin code ?
Ps: as uou i have km100 and xhorse pro
Do we have to program original remote again though it is already programmed?
Hi yes you would need too.
@@aloncramer3096 thanks for the info.
Of course you have to program the remote part separately
😂 adding a new chip via OBD when you have a working key takes less than 5 minutes on this vehicle. Why would you waste over 2 hours of your life on this?
Xhorse is a waste of time when cloning, not had one that has said any less than 1 hour. Wouldn’t dream of waiting that long to clone a chip.
how?
With loads of other tools, Autel, VVDI2, Zedfull etc.
Also for cloning 48 chips much better and faster with KD-X2. Never waited more than 10 minutes for a 48 clone
откуда вычитал пин код на видео этого нет если всё показываешь показывай честно всё а не юли
так ему пин код не нужен был абсолютно, чип то он не писал в голову, а копировал, для радиоканала пин не нужен)
Don't need pin for chip clone friend
What a waste of time, why not just add the key in normal way?