TAMIYA 1/35 JGSDF Type 16 MCV C5 / 陸上自衛隊 16式機動戦闘車C5 ウインチ装置付き

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 มิ.ย. 2024
  • いつもご視聴ありがとうございます。
    動画投稿が遅れまして申し訳ございません。
    2023年7月にタミヤから発売されました陸上自衛隊 16式機動戦闘車のウインチ付きを制作しました。
    このC5と呼ばれるモデルは2020年度の予算で製造された車両だそうで、前代のC4から引き続きエアコンユニットが装備されており、今回は牽引用ウインチを備えたモデルが登場しました。
    今回の制作動画では別売りのメタル砲身を使ってみました。
    ガス抜き穴を再現をするにはマスキングテープを目印にピンバイスで開けていくか、デカールで再現するかの選択ですが、このメタル砲身を使えば砲口からガス抜き穴まで精密に再現できます。
    戦車のような大きい砲塔を備えた装輪装甲車は戦車とは違ったかっこよさがありますね。
    Thank you for always watching.
    Sorry for the delay in posting the video.
    I made a version of the Japan Ground Self-Defense Force Type 16 Mobile Combat Vehicle with a winch that was released by Tamiya in July 2023.
    This model called C5 is said to be a vehicle manufactured using the 2020 budget, and is still equipped with an air conditioner unit from the previous C4, and this time a model equipped with a towing winch has appeared.
    In this production video, I used a metal gun barrel (sold separately).
    To reproduce the gas vent hole, you have the choice of opening it with a pin vise using the masking tape as a guide, or reproducing it with a decal, but if you use this metal gun barrel, you can precisely reproduce everything from the muzzle to the gas vent hole.
    00:00 オープニング Opening
    00:32 開封 Unpacked
    01:03 マスクシール貼り付け Pasting mask stickers
    01:39 車体の組立 Body assembly
    03:40 足回りの組立 Assembling the undercarriage
    05:21 砲塔の組立 Assembling the turret
    08:35 エアコンユニット Air conditioner unit
    10:11 車体の組立2 Body assembly 2
    10:55 ウインチ装置 Winch device
    11:54 サーフェイサー Surfacer
    13:15 足回り塗装 Underbody painting
    14:00 迷彩塗装 1色目 Camouflage painting 1st color
    15:34 迷彩塗装 2色目 Camouflage painting 2nd color
    17:44 つや消しクリア Matte clear
    18:21 足回り取り付け Suspension installation
    20:45 砲身取り付け Gun barrel installation
    21:17 デカール Decal
    22:15 ウインチ装置取り付け Winch device installation
    24:19 アンテナ取り付け Antenna installation
    25:08 完成写真 Completed photo

ความคิดเห็น • 3

  • @RattleSnakeScaleModeler
    @RattleSnakeScaleModeler 14 วันที่ผ่านมา

    Great job on this one, I have this an the older ver in my stash, at some point hope to build them both. looking forward to watching your other videos as well and seeing what new things you'll build up and post. Howdy from TX

  • @pabloaranda1979
    @pabloaranda1979 3 หลายเดือนก่อน +1

    こんにちは!私はアルゼンチン出身で、翻訳者を使用しています。とても美しいモデルです。ホイールについてお聞きしたいのですが、ホイールが回るのは大好きなのですが、外れてしまうことはありませんか?このモデルを買って動かしたいと思います!

    • @plamojapan-pmjp-
      @plamojapan-pmjp-  3 หลายเดือนก่อน +1

      コメントありがとうございます
      ホイールは自動車のホイールよりはよく回ると思います。大きいタイヤの割には丈夫に出来ている気がします。