This video randomly popped up on my home page I have a 2007 Spyder that came with a zip tied door handled I wasn't even sure it was repairable until I watched this. Now not only is it repairable but its repairable in style. Thanks you'll be getting a new customer next week :)
Just an FYI, having wasted my time: if you broke your doorhandle you do not have to take your doorpanel off to install aftermarket door-pulls. Just unscrew the two bolts where the broken pieces of the OEM door-pulls are and it should come right off, allowing you to install the new ones. Even if you didn't break your door handle, you *could* intentionally break the handle so you don't have to take the entire door off. Hope this helps!
"Up and out?" Not on my 2012. I think I would have appreciated knowing the location of the trim panel retainers so I could at minimum have a shot at prying them out intact instead of breaking all but one by pulling "up and out."
Do the 2 long bolts screw into the door frame itself? And this is why no need for those 2 small screws on the back side of the door panel. Do you still make these handles? Just subscribed to your helpful channel.
They look great! I just installed them today on my 2011 GS Sport. Though on the driver side when I pulled off my panel for some reason the black door pull assembly that the gray handle connects too fall down on the ground. >,< Now my door won't lock but it opens and shuts from the inside so. I'll need to investigate that tomorrow it got hot ever here in Texas.
@@yubinfourever the original door pull is two parts plastic per side so take something to wedge in between the plastic like a flat head screwdriver try using a thin one if you have it after a little bit of playing it should break off doesn’t matter if it comes off messy since you’ll be putting the new ones on from there you’ll see the bolts, two on each pull take them off clean up the application area and apply did mine in 5-10 minutes since the new ones come with new bolts as well.
This video randomly popped up on my home page I have a 2007 Spyder that came with a zip tied door handled I wasn't even sure it was repairable until I watched this. Now not only is it repairable but its repairable in style. Thanks you'll be getting a new customer next week :)
That's awesome! Please subscribe as we have a ton of videos to come!
Wish they was still making them
This video is so helpful. Thank you so much for the easy explanation
The return of the king
Just an FYI, having wasted my time: if you broke your doorhandle you do not have to take your doorpanel off to install aftermarket door-pulls. Just unscrew the two bolts where the broken pieces of the OEM door-pulls are and it should come right off, allowing you to install the new ones.
Even if you didn't break your door handle, you *could* intentionally break the handle so you don't have to take the entire door off.
Hope this helps!
Came here to say this
Pls do the fang lip install video and lowering sprints ♥️
Awesome job. I'll be ordering the Spyder labeled ones
Thanks for sharing this I got these from you they are Awesome and I'm excitedly waiting on my d2's to arrive this week ACI FTW
"Up and out?" Not on my 2012. I think I would have appreciated knowing the location of the trim panel retainers so I could at minimum have a shot at prying them out intact instead of breaking all but one by pulling "up and out."
Will these be back in stock anytime soon? Great video!
Do the 2 long bolts screw into the door frame itself? And this is why no need for those 2 small screws on the back side of the door panel. Do you still make these handles? Just subscribed to your helpful channel.
They look great! I just installed them today on my 2011 GS Sport. Though on the driver side when I pulled off my panel for some reason the black door pull assembly that the gray handle connects too fall down on the ground. >,< Now my door won't lock but it opens and shuts from the inside so. I'll need to investigate that tomorrow it got hot ever here in Texas.
Great job thank you!!!
Where did you get the door handles from???
Good video my man! 👍🏿
Is there any way you can get one door handle that has "Eclipse" on the drive side door. An have the other door handle saying "Spyder" on it?
Where can I get this door pulls?
you guys ship to canada??
Thank you for so much help!
I installed these, and during the summer they get really hot to touch. I ended up putting the factory pulls back on. :(
Are you guys out of stock still?
Discontinued:(
@@4GEclipseHowToACI breaks my heart now I gotta use my ugly stock ones:(
Donde puedo comprar
Were did u buy them
Link in the description bro
I was able to install both without taking my door frame out on my 07 gt
more than likely because your stock handles were already busted off or replaced ones already and the backing screws weren't there.
Oh how was this possible if you don't mind me asking? I'm paranoid of taking my door frame off since this is my first time doing car work like this.
@@4GEclipseHowToACI no they were stock just 14 years old at the time and used well
@@yubinfourever the original door pull is two parts plastic per side so take something to wedge in between the plastic like a flat head screwdriver try using a thin one if you have it after a little bit of playing it should break off doesn’t matter if it comes off messy since you’ll be putting the new ones on from there you’ll see the bolts, two on each pull take them off clean up the application area and apply did mine in 5-10 minutes since the new ones come with new bolts as well.
@@yubinfourever and these ones are fitted to fit either driver or passenger side keep that in mind should fit in flush.
No longer available, unfortunately 😢
10mm 😅 luckily I haven’t lost it yet