Great video however you whip through some basic key strokes making it a challenge for me to follow you. I'm very new to Lightburn so maybe this is not the video for someone like me, in the very early stages of learning the software. Had you taken a bit more time as you worked through the keystrokes, which I think was your intention, it would have been much more valuable for the beginner. I did get valuable information from this video, so thanks!
The laser cutter/engraver community is lucky to have you and your astonishing skills. I'm "chomping at the bit" to get your software and equally astonished at the rapid timeline you've established. A trivial question... keyboard nudge done by arrow keys as it typical of these types of programs, yes? Is there a setting to change the interval? Perhaps a shift-arrow for smaller nudges?
I have been following your posts for quite some time now. They are super informative and clearly spoken. Thank you. What is the max thickness acrylic you have cut through? What was the process? Your video here demonstrates a 5 pass cut with 75% power on a K40 laser and I'm curious how much it can cut through. Thank you!
Great video. Thank you! BUT I just purchased Lighburn. Next video could you make it fullscreen and make sure you go off autopilot by not using hot keys!
Good Show however one note ,You show on the screen the bot left as 0/0 ,when you show the k40 the 0/0 is at the top left so somewhere the axis are reversed ,I had the same problem with a pen plotter using GRBL and after reading up I realized I had to change the 0/0 location on my drawing app, Also once you change the 0/0 location on your lightburn you will not have to dance the laser head around to see where it going to cut as all you have to do is locate your design a couple mm from the 0/0 point and its good to go.
Is there a way to decrease the size of the step over for each pass? Video was great, but hate the way the laser filled in so that you can clearly see each step/pass.
Hello I really love your software but i cannot get it to communicate with my Ender3 Pro 3D Printer, I have it set up as GBRL laser comes on an off but no XYZ Control, do I need to do a firmware update on my printer to change it to Marlin, Sorry for asking question here I could not find any topics with ender 3 and Lightburn. If I can get it to work I will buy Software. thanks in Advance.
Hello, would you happen to know how could i automate the launching, loading and start of cutting process via C# console application? I noticed there is a python script using UDP.
Is there a difference between casual user/DIY and commercial license cost? Reason for asking is seen the software listed on a website and it says " for GCode controllers (DIY / hobby)" Not sure what this means? Ether it means the controller is more of a hobby level or it means the software license is not meant for commercial use. I'm just trying to be sure before I buy.
Please check online to find out how to remove that useless clamp and panel so you can cut much bigger items, I normally cut material 8.5inch by 11.0 inch on a K-40 where I normally run K-40 Whispherer.
I am doing exactly that but I don't have the CUT option under Mode when I want to cut - it only creates the outline (draws it). what do I need to do to CUT
I followed everything you did and when I hit the start button in lightburn, the button on my polar laser goes from red to green and doesn't move and no screen cones up yo say why it turned red
There's no question these videos are great but could you slow down on points where you change layers or create layers from one thing to another, I got lost here and was trying to replicate this project while watching. Great help though
We are working on revisiting some of the older videos on the channel. They are not meant to be followed in real time, but we are making them more concise and clearer to follow along with. That being said, pausing the video will still likely be needed.
@@lightburnsoftware7189 not a criticism I am brand new to lasers and desperately want to walk before I run but have been crawling …. A lot lol …. Thank you though
just a heads up, you can also change the playback speed of a video you are watching on youtube, watch it once, get the idea of it, slow down the playback on youtube to .5 or .25 to follow along. Good Luck!@@raspberrypiploy771
good video, just getting started on lightburn, so this was awesome
Great video however you whip through some basic key strokes making it a challenge for me to follow you. I'm very new to Lightburn so maybe this is not the video for someone like me, in the very early stages of learning the software. Had you taken a bit more time as you worked through the keystrokes, which I think was your intention, it would have been much more valuable for the beginner. I did get valuable information from this video, so thanks!
The laser cutter/engraver community is lucky to have you and your astonishing skills. I'm "chomping at the bit" to get your software and equally astonished at the rapid timeline you've established.
A trivial question... keyboard nudge done by arrow keys as it typical of these types of programs, yes? Is there a setting to change the interval? Perhaps a shift-arrow for smaller nudges?
I have been following your posts for quite some time now. They are super informative and clearly spoken. Thank you. What is the max thickness acrylic you have cut through? What was the process? Your video here demonstrates a 5 pass cut with 75% power on a K40 laser and I'm curious how much it can cut through.
Thank you!
new to this looks great wish mouse was different colour so i could track it better
Great job def gonna buy lightburn I have x carve and Jtechphotonics. What laser do you use in this video seems strong!
That’s the first time I have ever seen the stock k40 bed used lol
Great video. Thank you! BUT I just purchased Lighburn. Next video could you make it fullscreen and make sure you go off autopilot by not using hot keys!
Good Show however one note ,You show on the screen the bot left as 0/0 ,when you show the k40 the 0/0 is at the top left so somewhere the axis are reversed ,I had the same problem with a pen plotter using GRBL and after reading up I realized I had to change the 0/0 location on my drawing app, Also once you change the 0/0 location on your lightburn you will not have to dance the laser head around to see where it going to cut as all you have to do is locate your design a couple mm from the 0/0 point and its good to go.
Is there a way to decrease the size of the step over for each pass? Video was great, but hate the way the laser filled in so that you can clearly see each step/pass.
Will it work with a Bystronic 6000 Watt?
Hello I really love your software but i cannot get it to communicate with my Ender3 Pro 3D Printer, I have it set up as GBRL laser comes on an off but no XYZ Control, do I need to do a firmware update on my printer to change it to Marlin, Sorry for asking question here I could not find any topics with ender 3 and Lightburn. If I can get it to work I will buy Software. thanks in Advance.
What keys did you use to ungroup the outline?
Hello, would you happen to know how could i automate the launching, loading and start of cutting process via C# console application? I noticed there is a python script using UDP.
hello which machine is that
While the image was shit (...) , the video was very helpful
Great video I wish you would’ve went full screen make it easier to see.
Thank you for the feedback. We are working on redoing many of these older videos.
Is there a difference between casual user/DIY and commercial license cost? Reason for asking is seen the software listed on a website and it says " for GCode controllers (DIY / hobby)" Not sure what this means? Ether it means the controller is more of a hobby level or it means the software license is not meant for commercial use. I'm just trying to be sure before I buy.
Please check online to find out how to remove that useless clamp and panel so you can cut much bigger items, I normally cut material 8.5inch by 11.0 inch on a K-40 where I normally run K-40 Whispherer.
Can I use this software with my BOSS laser? If so, how do I set it up? I'd REALLY like to try the trial version. RDW sucks all the way around.
Bill
Can this software be used with a 9060 triumph laser with lasersoft software witch sucks big time.
I gave a thumb up for choosing the poop emoji!
What key did u press to see the inner lines on engraving?
@@lightburnsoftware7189 thanks for the tip
What material is that? Also, would an ortur 2 15w be able to cut like this?
If you are planning to cut anything don’t buy that laser. My wife bought one to play around with. Cuts paper and that’s about it.
Hi,Will this software work with my EleksLaser A3 Pro ?
LightBurn Software ah great, what option would I select? Just GRBL ?
I am doing exactly that but I don't have the CUT option under Mode when I want to cut - it only creates the outline (draws it).
what do I need to do to CUT
@@lightburnsoftware7189 I am. Using the Ortor master 2 pro and Lightburn latest version.
i have a full spectrum pro series 20x12 is this compatible?
LightBurn Software ⚽️🏀🏐🎾⚾️🥎🎱
I followed everything you did and when I hit the start button in lightburn, the button on my polar laser goes from red to green and doesn't move and no screen cones up yo say why it turned red
Sorry its green then turns red when I hit start
Is that acrylic?
How about something for a layman
There's no question these videos are great but could you slow down on points where you change layers or create layers from one thing to another, I got lost here and was trying to replicate this project while watching. Great help though
We are working on revisiting some of the older videos on the channel. They are not meant to be followed in real time, but we are making them more concise and clearer to follow along with. That being said, pausing the video will still likely be needed.
@@lightburnsoftware7189 not a criticism I am brand new to lasers and desperately want to walk before I run but have been crawling …. A lot lol …. Thank you though
just a heads up, you can also change the playback speed of a video you are watching on youtube, watch it once, get the idea of it, slow down the playback on youtube to .5 or .25 to follow along. Good Luck!@@raspberrypiploy771
It's a tutorial don't just say: "do that" while using the hotkeys. Thanks anyway
you go way too fast and explain too little. as a newbe we dont know how to do much of anything. Also new version is different than this. update video?
too fast need to slow down and show where you are what you are clicking on to stuff