I have a 03 suburban same issue just reversed my driver side has tail light but not my passenger side junction are all clean, fuses good bulbs new, new relay switch for flasher. All light work like normal but the passenger side taillight doesn't come on at all also the brake light do work all 3.
I have the exact same problem with my 03 Suburban (all lights work but my passenger tail light). My brother said that one of the wires has corroded in two and there is not enough wire to splice it back together. I am replacing the entire tail light harness this weekend and hoping that fixes the problem.
I, too, have a corrosion riddled gm. My Silverado is a nightmare. I’m in the process of redoing the wires from the junction box to the tail lights. Multiple broken wires caused by corrosion. Argh. Now I’m trying to figure out why I have no backup lights, after rewiring? Very slow process.
I was hoping you showed us how-to disconnect the plug under the back on the left hand side and I think the right hand side plugs into a wiring junction box that's known for going bad at least on the 2003 to 2006 Suburbans / Tahoes and possibly Silverados as well as the Cadillac Escalades. Does anyone on TH-cam know of a video link for the 2003-2006 Tahoe's or Suburban's as I don't want to damage the plug. It would be Super Appreciated!! Thanks Eddie J. Long Island N.Y.
and thing happend to me but idk how to fix it one of my tail lights is out and the other is on. the boss try went dead. i have no clue how to fix it. i have a cat eye chevy
Great video..! I have a 2007 ext Cadillac any chance that you can tell me why my backup/reverse lights stay on? I replaced the brake switch on the brake pedal...
The backup lamp relay and fuse are located in the under hood fuse block, The fuse is supposed to be #15 a 10 amp fuse. Cannot find a location for the relay. Check the inside of your cover. My guess is that the relay has failed on. To turn the lights off I would just pull the fuse for now.
@@TruckinBetweenRealities Thank you so much.. I have done everything you said to do however I can't figure out the location of the relay... I've been told that it is in the BCM (Body Control Module) left of the steering wheel under the dash...
My right signal works, but suddenly when I put my left signal on my hazards start working so when left signal is on it looks like my hazards are on can someone give me some feed back on how to fix this issue thanks.. on a 2004 Chevy Tahoe
@@fademeupmarvin2778 it ended up being the bulb itself. I know. I thought it was weird but for some reason the old bulb will only engage when I hit the brakes.
Well, I’ll take that as a compliment lol! Mine seemed easy really, however I learned at 220k the previous owner, the 1st owner, had the same problem so mine had been undone,
@@Professional_ProCraftinator Both if your still having problems replace circuit board box for rear lights and both left right turn signal tail stop harnesses the wires become brittle 2004 Silverado and won't carry voltage as they should. I noticed when would bend twist harness it would work a few days then 1 or more bulbs out either side few days later. Bought parts on amazon think I spent about $125 installed parts myself. Works like new no more issues 1 year since fix
![07 Tahoe Fix - ground wire issue [SOLVED]](http://i.ytimg.com/vi/OOuK7MTtZwU/mqdefault.jpg)
Thank so much .. was driving me crazy .. quick contact cleaner in the socket mounted under there and right as rain 👍👍👍👍
Good deal! That’s all it was for me. Took months to find it
I have a 03 suburban same issue just reversed my driver side has tail light but not my passenger side junction are all clean, fuses good bulbs new, new relay switch for flasher. All light work like normal but the passenger side taillight doesn't come on at all also the brake light do work all 3.
I have the exact same problem with my 03 Suburban (all lights work but my passenger tail light). My brother said that one of the wires has corroded in two and there is not enough wire to splice it back together. I am replacing the entire tail light harness this weekend and hoping that fixes the problem.
I have exactly the same did someone fix the problem
@@apekast73Did that work?
I, too, have a corrosion riddled gm. My Silverado is a nightmare. I’m in the process of redoing the wires from the junction box to the tail lights. Multiple broken wires caused by corrosion. Argh. Now I’m trying to figure out why I have no backup lights, after rewiring? Very slow process.
Luckily mine was pretty decent for 270,000 in this video she had 260
Did you ever figure out what it was
Yes, my bulb assemblies were heat damaged which caused intermittent issues and finally failed. Possibly caused by poor grounding?
2002 yukon Denali! I can't get the passenger side tail light to work.
I would check at the power at the same plug with a probe light
But how do you disconnect the plug i cant get mines off
Right!!!
I have the same problem I tried to pull it off with all my strength
Anyone has aftermarket tail lights and one of the break lights won’t turn on? My brake lights only work in day time lol but not night time.
This is happening to me RIGHT Now ahah . My taillights don’t work . Only the turn signals
@@209clickahow did you fix it?
Man this just happened to me, anyone have the fix to this mess? I even switched out the taillights and it works, so it’s something else
I don’t have turn signals at all , or brake lights but my flashers work and my running day lights any pointers u can give me?
I’m sure you have figure this out but, did you check the multifunction switch?
Just a wittle bit...lol thanks for the video it did help me
i tried it and it worked. thnkz cuz
how did u do it
Hey everyone!! I need some help for my yukon DENALI 05 😊
Can you make me a picture of your cables that connect the originals taillights please ?
2002 Denali no passenger tail light
I was hoping you showed us how-to disconnect the plug under the back on the left hand side and I think the right hand side plugs into a wiring junction box that's known for going bad at least on the 2003 to 2006 Suburbans / Tahoes and possibly Silverados as well as the Cadillac Escalades. Does anyone on TH-cam know of a video link for the 2003-2006 Tahoe's or Suburban's as I don't want to damage the plug. It would be Super Appreciated!! Thanks Eddie J. Long Island N.Y.
I can’t disconnect my plug it’s like it’s stuck
Try a heat gun over it but don’t get to hotzz
😊
and thing happend to me but idk how to fix it one of my tail lights is out and the other is on. the boss try went dead. i have no clue how to fix it. i have a cat eye chevy
What fixed this?
Great video..! I have a 2007 ext Cadillac any chance that you can tell me why my backup/reverse lights stay on? I replaced the brake switch on the brake pedal...
The backup lamp relay and fuse are located in the under hood fuse block,
The fuse is supposed to be #15 a 10 amp fuse. Cannot find a location for the
relay. Check the inside of your cover.
My guess is that the relay has failed on. To turn the lights off I would just pull the fuse for now.
@@TruckinBetweenRealities Thank you so much.. I have done everything you said to do however I can't figure out the location of the relay... I've been told that it is in the BCM (Body Control Module) left of the steering wheel under the dash...
My right signal works, but suddenly when I put my left signal on my hazards start working so when left signal is on it looks like my hazards are on can someone give me some feed back on how to fix this issue thanks.. on a 2004 Chevy Tahoe
I’d check the multifunction switch for anybody else having this issue
I just got where it wont light up when i push the break pedal
Could be the brake switch
I got stopped for a broken tail light. But when I pressed the brake pedal and it would turn on 🙄
This is what’s happening to me now how’d you fixed it?
@@fademeupmarvin2778 it ended up being the bulb itself. I know. I thought it was weird but for some reason the old bulb will only engage when I hit the brakes.
Hey y’all I need help I have no headlights and no reverse lights I have break and blinkers
Hope you go this fixed no help to me.
I have been looking amd looking for for problem and you’re problem you have it’s the same one I have I hope that’s my problem 😖
And thanks for the video man
You’re welcome sorry for not replying for 4 years. Hope your well
Mine won’t even come on no lights on my driver side
Sorry I didn’t see this in time
Can someone tell me how to take these stupid harness out
Mines stuck
@@AngelRodriguez-wj8px I ended up getting it basically u gotta take something to like undo it it’s not that easy as he make it look
Well, I’ll take that as a compliment lol! Mine seemed easy really, however I learned at 220k the previous owner, the 1st owner, had the same problem so mine had been undone,
On 6p
Huh?
What to clean harness with
CRC 5103 Quick Dry Electronic Cleaner - 11 Wt Oz. CRC Electrical Silicone Liquid Lubricant, 10 oz Aerosol Can, Clear
@@toddtaylor6192 just one of these or do we need them both?
@@toddtaylor6192 rubbing alcohol won't work for this, huh?
@@Professional_ProCraftinator Both if your still having problems replace circuit board box for rear lights and both left right turn signal tail stop harnesses the wires become brittle 2004 Silverado and won't carry voltage as they should. I noticed when would bend twist harness it would work a few days then 1 or more bulbs out either side few days later. Bought parts on amazon think I spent about $125 installed parts myself. Works like new no more issues 1 year since fix
🗑🗑🗑🗑🗑
What is