HOW TO REPLACE BRAKE PEDAL POSITION SENSOR ON CHEVY, CHEVROLET, BUICK, GMC, CADILLAC
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- HOW TO REPLACE BRAKE PEDAL POSITION SENSOR ON CHEVY, CHEVROLET, BUICK, GMC, CADILLAC
► Great Car Scanner: amzn.to/2QmNBri
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
If you are trying to replace brake pedal position sensor / brake light switch and you have Chevrolet, Chevy, GMC, Buick, Cadillac car we will explain what needs to be done to remove and replace the brake pedal position sensor / brake light switch . In this video we will explain where the brake pedal position sensor / brake light switch is located and how to replace it on most Chevrolet, Chevy, GMC, Buick, and Cadillac, it should cover multiple models made after 2006. We demonstrated how to replace the brake pedal position sensor on Chevrolet Cruze but it may be helpful on the following models since they are build by GM / General Motors:
Chevrolet Cruze Brake Pedal Position Sensor Location Replacement
Chevrolet Malibu Brake Pedal Position Sensor Location Replacement
Chevrolet Equinox Brake Pedal Position Sensor Location Replacement
Chevrolet Traverse Brake Pedal Position Sensor Location Replacement
Chevrolet Silverado Brake Pedal Position Sensor Location Replacement
Chevrolet Tahoe Brake Pedal Position Sensor Location Replacement
Chevrolet Suburban Brake Pedal Position Sensor Location Replacement
GMC Terrain Brake Pedal Position Sensor Location Replacement
GMC Acadia Brake Pedal Position Sensor Location Replacement
GMC Sierra Brake Pedal Position Sensor Location Replacement
GMC Yukon Brake Pedal Position Sensor Location Replacement
Cadillac ATS Brake Pedal Position Sensor Location Replacement
Cadillac CTS Brake Pedal Position Sensor Location Replacement
Cadillac Escalade Brake Pedal Position Sensor Location Replacement
Cadillac XTS Brake Pedal Position Sensor Location Replacement
Cadillac SRX Brake Pedal Position Sensor Location Replacement
Cadillac DTS Brake Pedal Position Sensor Location Replacement
Buick Encore Brake Pedal Position Sensor Location Replacement
Buick Enclave Brake Pedal Position Sensor Location Replacement
Buick Regal Brake Pedal Position Sensor Location Replacement
Buick Verano Brake Pedal Position Sensor Location Replacement
Buick Lacrosse Brake Pedal Position Sensor Location Replacement
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thanks! This worked for my 07 Chevy Equinox too. You saved me $500....
Brake light switch is different then the brake pedal position sensor. They are located on opposite sides of the brake pedal arm.
How do you test if the switch is still working?
Thank you brother
Do you know any scanners that support the CPP sensor relearn because most don't?
I would like to know the Ohm reading and fault Finding on a Clutch switch....Car don't start
Would this be the fix to the brake lights staying on when car is off in a 2012 Malibu? c0899, c0561, c0242
There was a 2014 recall which involved adding a spacer and dielectric grease to a bcm connector. I checked the connector and there was already dielectric grease on the connector.
Chevy Cruze brake light switch calibration 😊
My car is weird I don't see a sensor by the break pedal or the cable
Its hard to find brake switch for 2016 trailblazer chevrolet un the philippines. I have pictures here, anybody can help us ti find...
Sorry can't able to attached pictures.
I think mines need to be calibrated
Have you done the calibration yet? If so, what or how did you do it.
Bro what are you saying
😊❤
Great video, thank you, very easy to understand and follow. If a 73 year old woman can do this, anyone can.
🇧🇷🇧🇷🇧🇷
I am fairly sure that this scanner does not calibrate the sensor. You need an upgraded tool. $$$
Could you please post a link to the mentioned brake sensor calibration video?
You need a scanner to relearn the position. Funny, some tech videos are very thorough others not so much! They tell you just enough to have you pulling your hair out sometimes. I suspect they know more than they let on with these videos. If someone wants to be helpful, that's great, if not, don't expect the same clout as those who are.
I am having this problem where my brake lights are ON when I'm not pushing the pedal. so I have done what is stated here and bought a new brake pedal position sensor, I installed it with GREAT PAIN as I am not a little skinny guy, LOL. I think one of my ribs is broken now. Ok .. so now with the new sensor / switch installed, same exact problem is happening. So I looked at everything, for hours I have poured over what is happening. and something new has occurred to me.
before I bolted that switch in place I checked it, i manually moved the arm to see the brake lights come on and go off. I found that it has a few places in the switch that turn the lights ON. some of the points in the arms travel could never be reached while installed because the pedal does not allow movement that high or low. those places can only be seen with the switch not installed.
so here is my theory - when the switch is installed the slot the pedal arm goes in is kind of loose, not exact, so that the arm can slide i that slot freely ( in the video at "4:52" you can see a smudge in the inside of the slot On the fork where the pedal bar sets and makes contact and slides, that is the TOTAL travel! very short eh?)
so my problem it seems is the 1st switch action - this 1st action of turning on the lights is right when I push the brakes, it clicks the switch and sends the signal ON!. well that 1st action in the travel of the pedal is NOT really the 1st switch on. If the pedal when returning to the place it is supposed to set after the brake is applied is allowed to go a VERY small amount higher - the brake switch sends a signal to turn the lights on again and it will stay on all the time!
My return pedal action has , for some reason, been returning too far UP. less than 1/4 inch but just enough to turn the lights on without the pedal being depressed. If I move the pedal with my hand about 1/4 inch down the lights go off and the brakes are not engaged at all. I am wondering if there was some kind of Bumper, stopper, something that fell off or is smashed a little too flat that has allowed this to happen. I can't seem to find anything yet, does anyone know what the pedal bar rests on when it is all the way up? I am working on a 2007 Pontiac Torrent which has the exact same switch and set up as this video has.
symptoms are brake lights on all the time - once you push the pedal they go off for a split second and then on as normal and when you let off the brake it returns as it should and then 3 to 5 seconds later the brake lights come back on again and stay on. they go off if you push the pedal 1/4 inch or less and stay off if you hold it there.
Did you ever figure it out?
@@hollydempsey2691 Yes I did, I had to buy a scanning tool that is capable of running reprogramming tests, I know that sounds expensive. it was going to be but I don't have that kind of cash.. LOl I did have time though so I kept looking. I found this model to be the cheapest that can do the job. FOXWELL NT510 Elite. it cost me 100.00 I got the one that has GM programmed into it already. You can get 4 or 5 other brands afterwards if you want but I just wanted the cheapest i could do for that Torrent.
This thing worked so well, it was easy, I just plugged it into the OBD plug, It recognizes the car, the miles and everything, then I navigated to the car, ( It;s easier than playing electronic football in the 80's on a 9 volt hand held LOL) ,
so then it starts a test, tells you what to do , when to step on the pedal , poof it's done. seriously, I never used one before and it took maybe 3 minutes .
Here is the catch , these people at Foxwell know what they are doing but they are extreme Chinese. so you have to sort of just consider how they write in english.
this is the instructions : this ones for the Cadillac you can see but it will say your car instead.
so when you get to that last part Calibration, you just push enter and it goes . then your done. super easy I hope this helps folks out. It took me Forever to narrow it down to this machine. most all are 130.00 Mine was 100 bucks because i talked the guy down. LOL the box was smashed a little.
Procedure:
Manual Selection->(B) 2011->Passenger car->Cadillac->CTS->(Y) 3.0L V6 LF1->6-speed automatic->Yes->Other->Control Modules->Body control module->Special functions->BPP sensor calibration
@@hollydempsey2691 check it out.
www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=nt510+elite+gm&_sacat=0&LH_TitleDesc=0&_odkw=nt510+elite&_osacat=0
We’re having this issue on gmc Savanah box trucks rear brake lights go out when u touch pedal but will pop back on 3-5 secs later after releasing pedal even with new brake switches
I know on my 2007 GMC Yukon the switch and the position sensor are two different things. the position sensor acts as a relay controls the torque lock up in the transmission and also allows the cruise control to disengage when you tap the brake. Symptoms can include engine stalling, brake lights staying on or off all of the time, check engine light, lack of torque converter lock up.
This is a very helpful video thanks for uploading
This shit would be better on mute
Does that remove the service stability trac and abs light
Yeah the same thing happened to my truck after I install the new one those lights went away..
Absolutely yes
LOL I'm here hoping this will fix my SST/STC lights as well.
@@angelaramirez7531 what car you have? Brand model year
Mi carro marca ABS default y no son los sensores de las llantas, me dijieron que era el brake swich pero las luces trabajan bien con eso no tengo problema.
Alguna recomendación
Change brake light switch 2 of them and they both worked on lights but the cruise control doesn't work on neither?
how to relearn the new one clutch pedal sensor?
Thanks 🎉
not the same for saturn aura
Excelente
AFTER REPLACING SWITCH,,YOU STILL HAVE TO CALIBRATE NEW SENSOR,,THIS REQUIRES A SCANNER,,,,,
Not if it's the brake light switch.. I called Chevy dealer and they told me no calibration needed on a brake light switch
@@christopherjohnson4398 your dealer is blowing smoke up your rear end.
@@christopherjohnson4398 the brake light switch is the brake pedal position sensor
Thank you for the video
calibrate?
duct tape your camera to your hat or forehead,, it will help with under dash recording like this
Just Wonderful, you guys.
How do you reset these?
I didn't have to reset mine.
Google led me to the video for calibration and there was no calibration so do you have video for calibration and what scanner can be used other than $100000 snapon
My f iend gets traction control flashing and the vehicle either wont crank or it shuts off.is this her problem has a 2014 traverse