Installation instructions BILSTEIN B4 air suspension module for Bentley Continental 3W - front axle

The BILSTEIN B4 air suspension module offers optimum safety and durability. Don't be satisfied with less than BILSTEIN if you need OE replacement.
The best BILSTEIN air suspension technology for your car.
In close cooperation with Mercedes-Benz, we developed the BILSTEIN B4 air suspension module for maximum driving comfort. The revolutionary design provides damping, suspension and level control in one single part. The BILSTEIN B4 air suspension module is available for active and passive systems and is therefore the ideal OE replacement part for a perfect driving experience as on day one.
• Restores original functionality 100%
• Manufactured with 100% new parts for maximum reliability and safety
• 100% OE quality and comfort
• Available for all air suspension systems, active and passive
• Individually fine-tuned during BILSTEIN road testing to perfectly match OE air suspension module
Find out more: www.bilstein.com
#BILSTEIN
#45-260452

[@duongdoanmanh3907]

Thank you for the specific video tutorials for us to learn

[@Dg-zj6jo]

attention put in jack mode how can the main dealers charge 1000000s for this easy job amazing good video

[@potatochobit]

you are taking all the air out of the system, jack mode is not going to help you.
what is important, dont lower the car to the ground after replacing shock which is warned in the video; let it rest on the lift a few inches above being fully down with the tires barely touching the ground so it can refill the system without resistance.
btw, each air shock is 3000-4500$. so two of those are 8000$+

[@Dg-zj6jo]

k0 is that in the calabration or road test then tighten bolts what was that round part on the lower leg when he did up the lower bolt please

[@potatochobit]

when you change any suspension parts, you need to preload them before fully tightening.
that just means tighten the bolts when the car is on the ground, do not tighten them when the car is up in the air.
that prevents the rubber bushings from twisting and tearing.

[@nycliving9514]

Do a Rolls-Royce Phantom VII

[@ferasmartan8597]

noice