Definitely in my case, I got an average 15% improvement just by running EPR and changing the oil afterwards, no other work involved. It was an old sports car, an MR2, it felt like it had a new engine.
High how long do i leave epr engine restoration fluid running in the engine before dropping oil and oil sump ? I've heard from some mechanics to leave it running in a hot engine for up to an hour?
Instructions on EPR container says run engine in idle for at least 10 minutes at 1,200 RPM. If in ADDITION to running engine for 10 minutes, will damage be done to engine if the car is driven around for another 50 to 100 miles BEFORE DRAINING out the EPR. Would these extra 50 to 100 miles give more cleaning to the engine or instead would damage the engine?
هل لديكم وكيل أو موزع في البحرين ؟ كيف يمكنني الحصول على المنتج رقم 109 و 110 من BG ؟ Do you have an agent or distributor in Bahrain? How can I get product #109 and 110 from BG?
الوكيل كانو .. لكن بس يبيع ٤٤ك الباقي لا بس اذا بتبدل ايل عندهم تقدر يسويلك فلش ١٠٩ و ام او ا الي اهو يخلط مع الايل .. ٤٤ك ب ١٥ حوالي .. اي بي ار و ام او ا ب ٣٠
@@2fun2beme there are BG authorized service centers that will perform these services and have specialized equipment that can make these products work even better. Mainly flush systems. So there are in fact BG service centers.
So I used BG EPR in my vehicle. Within 3-4 my vehicle died. I couldn't get it to run unless I constantly gave it gas. I then drained my oil and did a full change. Now the vehicle is running fine. What may have caused this?
You are not supposed to leave it in there. The EPR is to remove buildups so they are all floating around in your oil. You should add EPR, run the engine at whatever RPM the can says for 15 or so minutes, then change the oil when it cools down a little. This is supposed to be a cleaning right before your new oil change as far as I am aware.
You did a big nono tbh. A flush should not be run more than they were specified. Im suprised it ran 3 to 4 days. The only additive you should leave in ur oil is bg moa. I would use it if i were u. Ur car is in need of lubrication
Вы инструкцию читали ? Как мы используем ( BG Moscow) Прогреть двигатель и масло до рабочей температуры. Залить bg109 в масло. Выставить обороты 1200-1600 от 15 до 40 минут на месте без движения и нагрузки. Заменить масло и фильтр, при необходимости промыть промежуточным маслом дополнительно, можно повторно залить 109 ( Если двигатель и масло слитое очень грязное).
I myself am BG certified...through a ford dealer and performance oil change definitely makes a difference. Truly helps. Thank you BG
Would be ok to used on motorcycle with wet clutch?
@@midlymdad1293use our 2912 kit
Would this stop my car from burning oil due to stuck rings?
Yes it should help
Possibly. But a piston soak procedure works better.
@@zzman5306 yeah i tried this treatment and nothing changed. Will try a piston soak next
@@winsonlee8956how did that go ?
BG44K straightens out most engines at idle.
Militec1 12Oz to the oil reduces friction like no other, must be studied for self gratification
Will this stuff help engine compression? And help intake valves
Definitely in my case, I got an average 15% improvement just by running EPR and changing the oil afterwards, no other work involved. It was an old sports car, an MR2, it felt like it had a new engine.
Yes it can. But a piston soak procedure works better for stuck rings.
@zzman5306 how do u do a piston soak and what to use
@@eoghanhennessy443 you fill your cylinder with a cleaner through the spark plug hole and let it soak for a day or 2
High how long do i leave epr engine restoration fluid running in the engine before dropping oil and oil sump ? I've heard from some mechanics to leave it running in a hot engine for up to an hour?
Instructions on EPR container says run engine in idle for at least 10 minutes at 1,200 RPM. If in ADDITION to running engine for 10 minutes, will damage be done to engine if the car is driven around for another 50 to 100 miles BEFORE DRAINING out the EPR. Would these extra 50 to 100 miles give more cleaning to the engine or instead would damage the engine?
Likely. The instructions are there for a reason. Just follow them and you’ll be safe.
I wouldn't drive it. But idling for 20 minutes won't hurt.
Is ok to use on motorcycle with a wet clutch?
They have liquid moly shooters this is for cars
@@sidharthchand8072 there are also for motorcycles, small bottle
هل لديكم وكيل أو موزع في البحرين ؟ كيف يمكنني الحصول على المنتج رقم 109 و 110 من BG ؟
Do you have an agent or distributor in Bahrain? How can I get product #109 and 110 from BG?
تقدر تشري من ebay? في البحرين ؟
كما قرأت بعض التعليقات على ال TH-cam ، بأن منتجات eBay و Amazon مقلدة وغير أصلية ، شكراً لردك
الوكيل كانو .. لكن بس يبيع ٤٤ك الباقي لا بس اذا بتبدل ايل عندهم تقدر يسويلك فلش ١٠٩ و ام او ا الي اهو يخلط مع الايل .. ٤٤ك ب ١٥ حوالي .. اي بي ار و ام او ا ب ٣٠
P/N 109M all I see is p/n 109 and 109e where I can buy it.
Idk if you have a local Napa Auto parts but that’s where i get all BG products
The real problem is the Entrained air in the fuel.
Its a foam party in your fuel tank.
Where is your service center in Dubai?
Husam Othman Just buy it on eBay. There are several sellers even closer to where you live.
BG Is a product supplier, not a service shop
@@johnmilner7603 avoid buying from eBay
@@2fun2beme there are BG authorized service centers that will perform these services and have specialized equipment that can make these products work even better. Mainly flush systems. So there are in fact BG service centers.
@@difsid569
Can you mention the reason? Because I couldn't find the product on Amazon!
Will EPR damage old rear main seal rope in a 1962 389
So I used BG EPR in my vehicle. Within 3-4 my vehicle died. I couldn't get it to run unless I constantly gave it gas. I then drained my oil and did a full change. Now the vehicle is running fine. What may have caused this?
You are not supposed to leave it in there. The EPR is to remove buildups so they are all floating around in your oil. You should add EPR, run the engine at whatever RPM the can says for 15 or so minutes, then change the oil when it cools down a little. This is supposed to be a cleaning right before your new oil change as far as I am aware.
You did a big nono tbh. A flush should not be run more than they were specified. Im suprised it ran 3 to 4 days. The only additive you should leave in ur oil is bg moa. I would use it if i were u. Ur car is in need of lubrication
😳🙄 can't leave it in
Вы инструкцию читали ?
Как мы используем ( BG Moscow)
Прогреть двигатель и масло до рабочей температуры.
Залить bg109 в масло.
Выставить обороты 1200-1600 от 15 до 40 минут на месте без движения и нагрузки.
Заменить масло и фильтр, при необходимости промыть промежуточным маслом дополнительно, можно повторно залить 109 ( Если двигатель и масло слитое очень грязное).
What caused it? An idiot.
بتهزروا ... يعنى كل مره تغيير زيت او مرتين .. احط بى جى ... ايه التهريج ده
If this stuff really worked which I proved doesn’t, it would be for sale in your automotive stores.
Where's ur proof? Went to ur channel to see if u made a video, showing ur proof but nothing
Some stores do sell it as does Amazon.