I like the look on this RC and I can see what they had in mind when making it, but it didnt translate from their idea to reality very well, You have brought their ideas into a better place then they did. Its just not where it needs to be "out of the box" for the 750$ price point. Great Videos and I am learning alot each time I watch one your vids. 👍👍
G'day Earl greetings from Australia. I just bought a Fireteam still waiting for it to arrive appreciate your candour with this RC. I upgraded the radio gear to a spektrum DX5 Rugged as I thought the original radio gear was pretty average for an RC that is north of IK down here. All in all not bad for an RTR I reckon.
Earl Great Video. I use thin CA glue on metal to plastic once it dries it will stay put. It will act just like lock tight on metal to metal. Be. sure to only use a small drop and avoid getting it on the contact side of the head of the screw. I use a fine toss away tip on the ca glue for precise placement. .17 runs no loose hardware so far however my bearings are getting "crunchy "and I will need to replace them soon. Thanks for sharing👍
Looks much better. 10:07 that was my thought, too, that middle jump looks like about the realistic max you want to be running that RC on. Still think it’s a great off-road drift car with the potential for doing some small jumps
Like the videos earl.Really enjoy watching you work on the rc's. Are you planning on installing any lights on the fireteam. I would like to install some on mine but don't know which lights would work and arrma don't have any yet. Keep up the great videos.
I dabbed the bottom holes with a hot glue gun! So far no screws loose. I had 3 come out on the very 1st run. Was also thinking about trying (no set/blue or white) pipe dope. If the screws still come out-will basically tell you they are pulling out & not vibrating out. Just a thought. Again the hot glue has been working so far. I bash pretty hard!
Really nice bash session E… been following the vids you’ve done with this machine and your tweeks to the the RC have definitely paid dividends…. Also…. I’m curious to why I’ve never seen you use one of those chassis protectors that protect your electronics so debris doesn’t foul your fans etc….mayb a heat issue??? Again thanks for sharing Earl Always enjoy ur work on ur channel….. I’m out ☮️💯👍🏻👍🏻👍🏻
Left my truck stock in the winter but I don't get alot of bad landing with it and did check the diff and I think 100k is good you just got to send it it will be fine.
@@earlmoorhead5555 that fan is cheap they put on there believe me I send mine in solid ice and hard snow haven't broke nothing yet but a barring on the same side you did
Drill lil hole and zip tie through top wire holder so wires don't go into the motor . Me too mostly about the chassis but they do wear out if you used this. firestorm everyday. At end of the day you get performance out new chassis because your going build from scratch unless you do just swap the chassis I watched guy using a towel as cradle making it pretty simple lol I forget the name of the guys channel obviously not your favorite rc 😆 if were you swap the chassis eventually for 15 bucks the bashing ones 50 .. use the arrmas what they for or build them to what u want , it will wear out fast in the desert 🏜 but be fun 😉 traxxas does last longer but you sacrifice the performance. I don't like the slop either and losi s you don't get that.. but who wants to thrash a losi 😆
You bash like me. Have fun but not trying to land on the moon. Lol. I am starting to see what rc guy was talking about when he mentioned you. Smart driving. I'm not a fan of the price point of that veichle. But each to there own. A car for every different flavor. 👍😎
Quick question for you Earl, does all Arrma's have that hole on the bottom of the chassis exposing the pinion gear? wouldn't that allow for rocks to go in and prematurely wear stuff out quicker or potentially break something? Thanks for the awesome videos.
Shove a piece of zip tie into the plastic holes to save yourself from buying the part the screw goes into. It actually works quite well and have even used the technique on my Outcast 8s so i can assure you it holds up. The screws will come out again if you just buy the same plastic part so snipping a piece of zip tie to shove in a hole will save you some money. If a screw pulls out enough, i just buy the aluminum part instead as long as it isnt a suspension part like an arm or a hub. I do on occasion buy a aluminum hub, but not an arm. Bulkheads and diff cases and transmissions, etc ill buy in aluminum. If i were to guess, i think your screw is out of the esc mount. M2C makes esc mounts for the 6s line and if i break an Arrma esc mount, ill buy one myself. Ive only got one "6s" Arrma but its got an MMX 8s combo in it so it isnt really a 6s anymore. I wouldnt run it on 8s so i guess you can still call it a 6s Arrma Kraton EXB. I dont have luck with Arrma as any i take out for a run breaks before the pack is used up.
That's not a Bash Earl thats a bath would like to see more on this truck being Arrma made us believe was the Best Basher on the market .Yet it Burnt servos out the ass the bearings shot out had countless other flaws why it sold at one point for 399.00 # We Got Beat Trucks only good if you Mod it few hundred dollars more .
![Arrma Fireteam 6s mit 15t Ritzel und Gensace Bashing 120c [German]](/img/n.gif)
This RC has come a long way since that first vid nice work Earl , this is how it should perform out the box for the price !!
Yes I agree way better control 👍👍just got to fix the landing hard issue now 👍👍
I use blue lock tight on plastic too and it seems to work just fine
Loctite 243
I like the look on this RC and I can see what they had in mind when making it, but it didnt translate from their idea to reality very well, You have brought their ideas into a better place then they did. Its just not where it needs to be "out of the box" for the 750$ price point. Great Videos and I am learning alot each time I watch one your vids. 👍👍
Thanks 🙏
G'day Earl greetings from Australia. I just bought a Fireteam still waiting for it to arrive appreciate your candour with this RC. I upgraded the radio gear to a spektrum DX5 Rugged as I thought the original radio gear was pretty average for an RC that is north of IK down here. All in all not bad for an RTR I reckon.
Nice 👍 just check the motor mount screws for lock tight and watch for bearing failure and it’s a great rc 👍👍
That rig really handles great now bro great driving and video !!!!
Earl Great Video. I use thin CA glue on metal to plastic once it dries it will stay put. It will act just like lock tight on metal to metal. Be. sure to only use a small drop and avoid getting it on the contact side of the head of the screw. I use a fine toss away tip on the ca glue for precise placement. .17 runs no loose hardware so far however my bearings are getting "crunchy "and I will need to replace them soon. Thanks for sharing👍
Good to know 👍👍
No trees around might as well be a BIG OLE BUSH that takes your wheels CLEAN OFF 🤑
Hahahahaah no tree vault around me like you have 😂😂
Having fun in the sun, looking good Earl. Thanks for sharing with us Brotha. 💯🔥👍✌
Thanks 🙏
Definitely like the white body the best. I still think it needs a bar light on top. Nice Bush shot!😀 Some nice jumps, it does that nicely 👌
Looks much better. 10:07 that was my thought, too, that middle jump looks like about the realistic max you want to be running that RC on. Still think it’s a great off-road drift car with the potential for doing some small jumps
Earl....Drill a small hole at the top of the wire keeper,,,then put a body pin in...works great....🇺🇸👈🚘
Fill the holes with hotglue and reinstall the screws before the glue hardens completely
Great video Earl
Great video . It’s definitely driving different compared to before.
Handles jumps better than I thought it would
Like the videos earl.Really enjoy watching you work on the rc's. Are you planning on installing any lights on the fireteam. I would like to install some on mine but don't know which lights would work and arrma don't have any yet. Keep up the great videos.
Maybe I’d use the Losi light I think off the DBpro maybe 🤔
I used the Pro-Line 5" curved light bar on my FireTeam. A bit expensive but easy to install.
I’d say looks like its an all terrain RC … deserves its own respect and climbing its way up the ladder 👀👀👀
Great video, have to catch up on the videos👊👊💯💯
I dabbed the bottom holes with a hot glue gun! So far no screws loose. I had 3 come out on the very 1st run.
Was also thinking about trying (no set/blue or white) pipe dope. If the screws still come out-will basically tell you they are pulling out & not vibrating out. Just a thought. Again the hot glue has been working so far. I bash pretty hard!
BOW-NANNA CHASSIS🤣😂🤣😂
Really nice bash session E… been following the vids you’ve done with this machine and your tweeks to the the RC have definitely paid dividends…. Also…. I’m curious to why I’ve never seen you use one of those chassis protectors that protect your electronics so debris doesn’t foul your fans etc….mayb a heat issue??? Again thanks for sharing Earl
Always enjoy ur work on ur channel….. I’m out ☮️💯👍🏻👍🏻👍🏻
The dust dirt protecter just become a hassle on installation and tend to fall apart after a few runs 👍👍
Love the improvements 😍 it come a long way great job!!!!🔥🔥🔥🔥
Seems better now
I seen the other one sitting in the doorway this afternoon 👍
🤪🤔🤔
This spot looks local to me. I’m trying to find some good bash spots in the San Fernando valley. Any suggestions
Definitely way better now
Left my truck stock in the winter but I don't get alot of bad landing with it and did check the diff and I think 100k is good you just got to send it it will be fine.
Some hard hit sending it on landing to break a fan blade that quick 👍👍
@@earlmoorhead5555 that fan is cheap they put on there believe me I send mine in solid ice and hard snow haven't broke nothing yet but a barring on the same side you did
@@zerrickdracing6784 call rock are harder I guess never broke a motor fan just the esc fans most of the times 😳😱
@@earlmoorhead5555 soso!! when you get the cold temperatures we get here in michigan you would think differently about rocks being harder lol 😆 🤣 frfr
Good Video and Good Bash!
What about adding bump stops to your shocks?
As I watch I was saying those are some hard landings. I wonder how the axels shocks and bearings will hold up
Greetings Earl.
Right crazy hard landing 😳
Drill lil hole and zip tie through top wire holder so wires don't go into the motor . Me too mostly about the chassis but they do wear out if you used this. firestorm everyday. At end of the day you get performance out new chassis because your going build from scratch unless you do just swap the chassis I watched guy using a towel as cradle making it pretty simple lol I forget the name of the guys channel obviously not your favorite rc 😆 if were you swap the chassis eventually for 15 bucks the bashing ones 50 .. use the arrmas what they for or build them to what u want , it will wear out fast in the desert 🏜 but be fun 😉 traxxas does last longer but you sacrifice the performance. I don't like the slop either and losi s you don't get that.. but who wants to thrash a losi 😆
Beast but the fire team will need the metal hub carriers
The hubs flex alot
You bash like me. Have fun but not trying to land on the moon. Lol. I am starting to see what rc guy was talking about when he mentioned you. Smart driving. I'm not a fan of the price point of that veichle. But each to there own. A car for every different flavor. 👍😎
Yes this rc way to much for what we get 💯💯
I’d like to see it run on Kraton copperhead 2’s
Quick question for you Earl, does all Arrma's have that hole on the bottom of the chassis exposing the pinion gear? wouldn't that allow for rocks to go in and prematurely wear stuff out quicker or potentially break something? Thanks for the awesome videos.
Yes
I tape it closed on my speed builds and yes dirt and rocks grind the spur gear damaging it
Is there a purpose for that hole besides planned obsulence from Arrma lol.
Your the KING BUSH-WACKAH
The bush trimmer rc life 😱😂😂
@@earlmoorhead5555 bush-life
It’s a rough job but someone got to do it 😱😂
Motor fan om my FireTeam also gave up almost immediately, think it ingested too much snow 😜 Arrma stock fans are not very durable.
Low power if they jam they don’t burn out but not water proof and blades break off on impact most fans don’t hold up
How about 1 million in the center dif?
A heavier shock oil would help with the landings wouldn't it
Yes or start bending shock shaft 🤔
Is it ok to put marine grease in bearings or not?
Yes it fine
RTR Fireteam vs Xmaxx ?
Non my xmaxx are stock 😳
@@earlmoorhead5555 do it the way you have it that would still be cool
@@earlmoorhead5555 so if you were plannings on buying one first you would go with the Xmaxx right?
Yes for sure best basher and cheap to repair
@@earlmoorhead5555 Thanks Earl just asking all my fav. Top RC TH-cam channels before I drop all this cash on my next RC.
What battery are you running
Gen ace
Shove a piece of zip tie into the plastic holes to save yourself from buying the part the screw goes into. It actually works quite well and have even used the technique on my Outcast 8s so i can assure you it holds up. The screws will come out again if you just buy the same plastic part so snipping a piece of zip tie to shove in a hole will save you some money. If a screw pulls out enough, i just buy the aluminum part instead as long as it isnt a suspension part like an arm or a hub. I do on occasion buy a aluminum hub, but not an arm. Bulkheads and diff cases and transmissions, etc ill buy in aluminum. If i were to guess, i think your screw is out of the esc mount. M2C makes esc mounts for the 6s line and if i break an Arrma esc mount, ill buy one myself. Ive only got one "6s" Arrma but its got an MMX 8s combo in it so it isnt really a 6s anymore. I wouldnt run it on 8s so i guess you can still call it a 6s Arrma Kraton EXB. I dont have luck with Arrma as any i take out for a run breaks before the pack is used up.
Stock diff fluid or did you change it?
Changed the fluids
@@earlmoorhead5555 what weight?
That's not a Bash Earl thats a bath would like to see more on this truck being Arrma made us believe was the Best Basher on the market .Yet it Burnt servos out the ass the bearings shot out had countless other flaws why it sold at one point for 399.00 # We Got Beat Trucks only good if you Mod it few hundred dollars more .
Do you think you can polish this turd enough to be a fun car, or is it just going to be endless hassles?
Idk not sure if it will last without issue everytime out 🤔
Slt3, they could have done better?? Wt ya know , at least the Talion came with a Dx3, better but not by much 😆😆😆👊👍