DIY MINI GAME CONSOLE | ATTINY 85
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2019
- JLCPCB Prototype for $2(Any Color): jlcpcb.com
Hello friends in this video I have made a cool mini game console using ATTINY85 as a micro controller & 0.96" oled display
circuit drawing & PCB
easyeda.com/sharmaz747/attiny...
Game code
github.com/andyhighnumber/Att...
Components used
Attiny 85 microcontroller
10K Ohm (1206) smd resistor x 2
6.8K Ohm (1206) smd resistor x 1
1K Ohm (1206) smd resistor x 1
smd led (1206) x 1
6mm SMD tactile PB X 3
0.96 Oled display( gnd,vcc,scl,sda) x 1
slide switch x 1
CR2032 battery x 1
CR2032 battery holder x 1
3V Buzzer x 1
Music :- "8 Bit Summer!" Fun Upbeat Game Music by HeatleyBros
• Level Up Theme Song "8...
iTunes :goo.gl/M3b16f
Spotify: goo.gl/5SbVuk
License:goo.gl/jadB5E
Twitter: goo.gl/fKqyrj
Discord: / discord
Facebook: goo.gl/PrsTvS
Instagram: / heatleybros
💻visit for more projects :-
👉electricdiylab.com/
👉FB page :- / innovativemr
My Gears :-
Camera :- amzn.to/2FO4W5E
Video Light :- amzn.to/2FNKzFL
Mic :- amzn.to/2HYqBZC
Soldering Kit :- amzn.to/2FgNd8Z
Screw driver set :- amzn.to/2FkhHHm
Rotary tool :- amzn.to/2FM3Lnh This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects +91 7600079068 - วิทยาศาสตร์และเทคโนโลยี
ATtiny85 runing at 1 MHz. the Game is very slow not playable !
Please set the clock speed fuses on an ATtiny85 To 8MHz
When using an Arduino as a programmer
Configuring the ATtiny to run at 8 MHz
By default, the ATtiny’s run at 1 MHz. You can configure them to run at 8 MHz instead, which is useful for faster baud rates with the SoftwareSerial library or for faster computation in general. To do so, once you have the microcontroller connected, select “8 MHz (Internal)” from the Tools > Clock menu. (In Arduino 1.0.x, select the appropriate 8 MHz clock option from the main Tools > Board menu.) Warning: make sure you select “internal” not “external” or your microcontroller will stop working (until you connect an external clock to it). Then, run the “Burn Bootloader” command from the Tools menu. This configures the fuse bits of the microcontroller so it runs at 8 MHz. Note that the fuse bits keep their value until you explicitly change them, so you’ll only need to do this step once for each microcontroller. (Note this doesn’t actually burn a bootloader onto the board; you’ll still need to upload new programs by clicking on Arduino Upload button)
Great to see this lovely bit of hardware to run my games :) As Djamal.Uk mentions in the comments below - you need to pay attention to bootloader settings to make sure the clock frequency is correct (most of the games in my repo (linked above) are 8MHz, one is 16Mhz, but this is clear from the code header).
Happy to receive requests for any new games - it's about time I got coding again!
Awesome work..
Thanks a lot for this video
I like the ATTINY 85 microcontroller
This videos are usually hard to find. It might be too much to ask but could you make another ATtiny85 console video!
awesome!!
Very nice and cool.
Amazing
Awesome :)
Hey can we upload program in those cheap digispark ATtiny85, desolder the attiny85 and then resolder it on my custom PCB?
BTW: I used a pull-up resitor of 100 kOhm for the PB5 (reset-port) it worked better for me.
Mst bro..
Cool)
Классно !
Why we r using pin2 & pin3 of ATtiny85 for display instead of default SDA SCLK (pin5 & pin7)?
👍
and then when you shots to all enemys? level up?
👍👍👍👍👍👍👍👍
very good
Hey bro your project is too good can you make a robotic arm?
what is the size occupied by code on attiny??
Please make a arduino nano pong consol
What's the name of the socket for attiny?
Can i do IT with attiny13?
Nice Project 😄🤘🏻
But plesse Upgrade your Soldering iron You need a High Temperature Soldering iron
I think the algorithm didn't like your music. I'm watching this video now and there's no audio.
oh wow, yeah i was so confused on what was happening
ok so i'm not the only one
Hmmm ...
How dose the code work ?
Great, I was using your board ordering it from JLCPCB. That worked fine. I then uploaded the Space Invaders Code from www.tinyjoypad.com/home and adapted it to the match the rquirements: github.com/tscha70/ATTiny85-Playground - Thank you so much for your instructions!!!
Btw: It is a really nice and playable version of Space Invaders on the ATTTiny85-20
Can i purchase kit from india,
sound is so low
there's no audio
Why is it so quiet
I love your project! I'd like to build 10 I give as gift to some friends. But is there a way to speed up the game?
Programe processor to 8mhz
Firts
Or give reply
it's so slowly
Plz make one and send me ..I will pay you for this brother
Please make something useful for everybody's need. Make your community better.
And just what makes you think I don't need a DIY gaming console in the age of CCP-Virus lockdown. Mr. Innovative, thank you for this video. I think building this device will make my community better. After all, idle hands are the devil's workshop.
Haha 11 Dollar the Boards and 30 Dollar shipping... Sure...
Is there just zero audio? Wierd.
It actually is there, but is very very quite.