I’ve been using the Mimiq for a couple years. It is incorporated in my TMP board. In your experiment today, the Mimiq and Doubler Other sounded the most similar. When I first incorporated the Mimic on my TMP, I did what you are doing. Right now, I am experimenting with running the Mimiq outboard and running the stereo outputs into the upper and lower channels. I am finding that best results from the Mimiq seem to occur when it is first in the signal chain. Nice work. I was hoping someone would do a TMP/Mimiq video, and you have done two!
Thanks, Doug. That sounds great! I could sure use a Logic tutorial to record from the TMP. Perhaps a quick guide on how you did the recording in this video would help. Logic has me lost.
Doug, I am not normally one to make requests but I would love to see your take on Stereo rigs set up, and also a tutorial on different ways to use the left/right pan with the split box
here you go: www.amazon.com/TestHelper-30-130db-Display-Hanging-Measuring/dp/B0775YNF6F/ref=sr_1_6?crid=17F8BTCDN2A0C&dib=eyJ2IjoiMSJ9.inIjad0xz7Udzj3PDgX9xx0NscOtY8e-618OHWbshcaDTXXTWLcmRcEDxwqloSEZP2irfUvte-7fc273lko_IczVlqjEL1B5TXktgp-0pGqWvkt4YUSWhqWP--K7E8TFdIqI_d0OIe0ze8UA3aB4_JaVjfSHQR_eOUUpjiiT3QWN5EbLFUx4bFLy1DSLMP2s4CmkyuiPZ3JFxpCKJD1pNcilKtzRfzOJCkgj3-5_GAE.3DQvKWSaa6LGj6hKKeOI1_vU4YjDwRqCE_1yRQy9cPE&dib_tag=se&keywords=decibel%2Bmeter%2Bled&qid=1727919748&sprefix=decibel%2Bmeter%2Bled%2Caps%2C125&sr=8-6&th=1
Hi Doug, I don't know if this is in your wheelhouse, but here goes. I want to put my Kemper Player in a loop of the TMP, so I have the option of using it's profiles in place of TMP amp models. I also want to use the TMP midi out to make CC changes in the Kemper. I can figure out which CC numbers to use to make the changes. What I was wondering is if you have any knowledge to lay on me about setting up the TMP to send those changes. Any help will be appreciated. :)
30 ms is too long! Waiting for a firmware uipdate in which Fender makes all the delay pedals have down to zero ms of delay. It's odd that they didn't do this tobegin with.
I’ve been using the Mimiq for a couple years. It is incorporated in my TMP board. In your experiment today, the Mimiq and Doubler Other sounded the most similar. When I first incorporated the Mimic on my TMP, I did what you are doing. Right now, I am experimenting with running the Mimiq outboard and running the stereo outputs into the upper and lower channels. I am finding that best results from the Mimiq seem to occur when it is first in the signal chain. Nice work. I was hoping someone would do a TMP/Mimiq video, and you have done two!
Glad you liked it 👍
Thanks, Doug. That sounds great! I could sure use a Logic tutorial to record from the TMP. Perhaps a quick guide on how you did the recording in this video would help. Logic has me lost.
A Logic recording tutorial is on the schedule. Thanks for watching!
Great video Doug! Love that you take the time to show us these helpful tips!
Glad to help
In the mix I couldn't really tell which was which. Solo... ABC a little, but all darn similar... even raw.
Doug, I am not normally one to make requests but I would love to see your take on Stereo rigs set up, and also a tutorial on different ways to use the left/right pan with the split box
Great suggestion!
The Call!!! Nice Doug. 👍
Thanks 👍
Thanks 🙏🏻 again Doug 🎸🎶🎸🎶🎸
My pleasure!
Thanks Doug .
Can you tell how is called that decibel meter ? Looks cool i might want one .
here you go: www.amazon.com/TestHelper-30-130db-Display-Hanging-Measuring/dp/B0775YNF6F/ref=sr_1_6?crid=17F8BTCDN2A0C&dib=eyJ2IjoiMSJ9.inIjad0xz7Udzj3PDgX9xx0NscOtY8e-618OHWbshcaDTXXTWLcmRcEDxwqloSEZP2irfUvte-7fc273lko_IczVlqjEL1B5TXktgp-0pGqWvkt4YUSWhqWP--K7E8TFdIqI_d0OIe0ze8UA3aB4_JaVjfSHQR_eOUUpjiiT3QWN5EbLFUx4bFLy1DSLMP2s4CmkyuiPZ3JFxpCKJD1pNcilKtzRfzOJCkgj3-5_GAE.3DQvKWSaa6LGj6hKKeOI1_vU4YjDwRqCE_1yRQy9cPE&dib_tag=se&keywords=decibel%2Bmeter%2Bled&qid=1727919748&sprefix=decibel%2Bmeter%2Bled%2Caps%2C125&sr=8-6&th=1
Hi Doug, I don't know if this is in your wheelhouse, but here goes.
I want to put my Kemper Player in a loop of the TMP, so I have the
option of using it's profiles in place of TMP amp models.
I also want to use the TMP midi out to make CC changes in the Kemper.
I can figure out which CC numbers to use to make the changes.
What I was wondering is if you have any knowledge to lay on me about
setting up the TMP to send those changes.
Any help will be appreciated. :)
30 ms is too long! Waiting for a firmware uipdate in which Fender makes all the delay pedals have down to zero ms of delay. It's odd that they didn't do this tobegin with.