Hey Bill, I'm looking to do this mod to my 2013 gt, but with Borla ataks. Could you please help me with these questions? 1. What LT headers will match a Borla gt500 catback? 2. Does borla offer a catted x pipe? 3. Does Borla have black quad tips? Thank You!
I have a 2012 mustang boss 302 (kona blue) I want to put quad tips on it. Would I have to get a 2013 rear bumper in order for the gt500 valence to be put on? Or do I just simply buy the gt500 valence for quad tips and cut my 2012 rear boss 302 bumper for it to fit? If you can help me please and thank you
Stupid question here, i've seen some videos where the exhaust tips stick a few inches out from the valence. Can i adjust this an push the tips in to where they closely match the bumper and only stick out an inch or so? the ones in this video look perfect
I have roush axle backs w/round tips on my 2014 gt and I want to get quad tips for this valance. Can the tips be center with the muffler or do they need to be offset?
Bill, Have you had any issues with installing this system on a GT with headers and OR X pipe with res delete? Corsa said they may have a ringing sound with Long tubes.
I have a 2013 GT/CS. Do I need to do any cutting or can I just swap out the valences? Also, does Corsa offer the GT500 style in the extreme axle-backs?
@Bill Tumas, oh okay thabks for the info. also I wanted to ask about an exhaust I've been thinking about getting one for my 2014 v6 mustang but since there're so many brands and kinda to choose from I'm stuck on which one to go with. if you can give me some info and what kind would best fit mine . thanks
Bill Tumas I have a 2012 mustang boss 302 (kona blue) I want to put quad tips on it. Would I have to get a 2013 rear bumper in order for the gt500 valence to be put on? Or do I just simply buy the gt500 valence for quad tips and cut my 2012 rear boss 302 bumper for it to fit? If you can help me please and thank you
I cried a lil watching the bumper being cut, but i cried after because it looked and sounded so good!
I'm really liking the new Mustangs. These videos aren't helping me fight my urges lol
Gg hjk
Hey Bill! That 2013 looks stunning, and that sound is music to my ears. Thank you Sir 😎👍
Wish you guys would've done some driving with this exhaust
You guys are the best 😎😎😎
Yesss!! First mod if I ever get a 2013-14 GT.
Bumper cutting starts at 6:10!
Dan Mc not all heros wear capes
12:42 for sound
Quick question: Will an X-pipe give a lauder sound?
Hey Bill, I'm looking to do this mod to my 2013 gt, but with Borla ataks. Could you please help me with these questions?
1. What LT headers will match a Borla gt500 catback?
2. Does borla offer a catted x pipe?
3. Does Borla have black quad tips?
Thank You!
I have a 2012 mustang boss 302 (kona blue) I want to put quad tips on it. Would I have to get a 2013 rear bumper in order for the gt500 valence to be put on? Or do I just simply buy the gt500 valence for quad tips and cut my 2012 rear boss 302 bumper for it to fit? If you can help me please and thank you
no way to add it on a v6?
Bill i want a cut out muffler for my 13
One i can hit a switch and open it up
Got anything
That’s awesome!
is it not possible to just jack it up and cut from under the car without removing bumper
Can I fit this on my 2011 gt500
hope they keep the quad tips for the 2015 kit
Stupid question here, i've seen some videos where the exhaust tips stick a few inches out from the valence. Can i adjust this an push the tips in to where they closely match the bumper and only stick out an inch or so? the ones in this video look perfect
What cutting tool did he use? I'm doing my conversion this friday so i'd like to make my life easier knowing what to get in advance.
Aaron Castellanos just a small air saw and then a Dremel to clean it up
@@cjponyparts thanks!!
Aaron Castellanos sure no problem, good luck on your install!
Hey bill , how can I order parts from CJ Pony also is this can work on my Shelby Gt 2007 ??
A drim reel bit?
I have roush axle backs w/round tips on my 2014 gt and I want to get quad tips for this valance. Can the tips be center with the muffler or do they need to be offset?
9:04 GTFOH!! There's a tool for that??? 😮
Bill, Have you had any issues with installing this system on a GT with headers and OR X pipe with res delete? Corsa said they may have a ringing sound with Long tubes.
GS357 S Never tried that combo so I can't say
+Bill Tumas hey bill ,do u think this will fit in a 2014 V6 with welding ?
+JennaBringsSexy Pipe diameter is different so it would require welding and reduction
+Bill Tumas do i need a gt over axle pipe or do u think it can be done on stock pipes
I have a 2014 GT and I ordered the GT/CS valence, can I use the same lines and the GT500 valence?
Is the Corsa Sport louder then the OEM GT500 Exhaust?
I'm looking 4 a nice rumble sound while crusing.
Jarvis Clark no they just build and produce them so they are quieter than stock
Alex Pyron i was thinking of the 11-12 GT500 Mufflers on my 13 GT. Thats why im asking
Jarvis Clark they are definitely louder than stock just go with the xtremes
What kind of tool can I use to cut the bumper ? Will dremel work ?
mikixP it should work just fine
I have a 2013 GT/CS. Do I need to do any cutting or can I just swap out the valences? Also, does Corsa offer the GT500 style in the extreme axle-backs?
+mrmeni2684 You should not have to cut the center since you have the GT/CS valance. We only offer the sport.
+Bill Tumas Hey Bill, how do these mufflers compare, in loudness, to the stock GT500 mufflers?
These are louder
If I already installed a roush valence would I still be able to switch to the gt500 since I did already make cuts to my bumper?
+Dominic Gracia The Roush requires far less modifications so you should not have any issues switching to the GT500
Is there an equivalent of these for the 2010-2012 Mustangs?
Sorry we do not have any quad tip options for the 10-12.
@@cjponyparts thanks for your response,love your work.
Get a 13-14 bumper and buy the kit it’s the same.
@@Loveroflife5.0. Thanks you much.
That diffuser or lower valance can you put that on a 2012 mustang gt bc they have different rears
No this is 13-14 only without serious fabrication work.
hey man my name is Rafa wanted to show your TH-cam channel some cali love . anyways will this fit my 2014 v6 mustang. ???
+Farmboi Raf22 This is for GTs only
@Bill Tumas, oh okay thabks for the info. also I wanted to ask about an exhaust I've been thinking about getting one for my 2014 v6 mustang but since there're so many brands and kinda to choose from I'm stuck on which one to go with. if you can give me some info and what kind would best fit mine . thanks
Do all gt500 axel backs fit on 2014 gt
Yes with the valance
Are these mufflers light? The factory ones are so heavy.
+Andy34mn They weigh about the same since the quad tip does add some weight.
How much would it cost to get it installed at a shop?
Cesar Camejo Just do it your self its not worth spending the money to have it installed at a shop.
+Cesar Camejo I got my 2013 Boss Rear Valence installed at ford for $45 flat
Do these work for the 13-14 v6 as well ?
These are GT only.
Can you take a mustang to a shop to get that done
B M I am sure there are plenty of shops that would do that
Thank you
What size blade did you use?
Would This work with a 2014 v6 ?
California Truck body yes
304 steel... nice
would it work on a 2013 mustang v6
chris jr yes bro
does this work for 11-12 gt500
no you will need 13-14 rear bumper
If you want that look, this is the best or hire someone. DIY forever!!!
would this work on my 13 boss ?
+David Last yes
bill would I still have to cut my bumper even tho its a boss
not as much but yes
+Bill Tumas would I be able to convert a roush exhaust to a quad exhaust?
Bill Tumas I have a 2012 mustang boss 302 (kona blue) I want to put quad tips on it. Would I have to get a 2013 rear bumper in order for the gt500 valence to be put on? Or do I just simply buy the gt500 valence for quad tips and cut my 2012 rear boss 302 bumper for it to fit? If you can help me please and thank you
Can I do the same to my v6 2013? I just want it for the looks
I just ordered a gt500 valence which fits but the exhaust system in this video might not
These things are to quiet I have long tubes catted x pipe stock resonators and it's barely louder than stock
If it was in carbon fiber
Does it work for for mustang 1989
Super expensive not even worth it $1800 after tax ! 😬 ouch
and doesnt sound too loud
boss 302 owners dont have to cut anything :D
What about California Specials?
Never mind. it says in the description lol
Once the 13-14 gt500 valance is installed. Do 13-14 gt500 axle backs or any quad tip axle back now bolt on?