Nice webinar-thank you. Helped repair my U760E trans with bad solenoid. :) and now I know what to look out for in the near future. bad solenoid about 125K miles 2011 camry with 4 cyl 2.5L mated to above trans. Would have liked to see a link for case rebuild on the loose bearing race issues for this trans.
Tap in 4 small screws around the inner race, into the aluminum case. Tack weld to the race itself so it cannot move. Make sure the welds don't interfere with the planet. When you press everything back together, there's enough play in the center bearing to not affect its operation. Done this several times and have kept tabs on the customers vehicles. Oldest one in operation has been 2.5 years with 40k miles so far.
amazing tutorial, i hope one day you can help us with another tutorial related to the u 140 e transmission,(i have problems assembling my transmission cause i dont understand the ammount of clutches under and of top of the ctr support) thank you so much.
i have mazda with fw6a-el transmission that is made by aisin can i use toyota ws atf in it since it closely related to u660e except fw6a-el has wet clutches?
It depends on a lot of circumstances. I can connect you with one of our technical advisors to answer this for you. Please email all of your contact information to techemail@atra.com and we'll set something up.
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
Este contenido es oro puro...
Gracias compa,, saludos desde Guatemala, Gracias por tomarte el tiempo de compartir con nosotros....
eres muy bienvenido gracias
Unbelievable amount of help and this just one video.
Nice webinar-thank you. Helped repair my U760E trans with bad solenoid. :) and now I know what to look out for in the near future. bad solenoid about 125K miles 2011 camry with 4 cyl 2.5L mated to above trans. Would have liked to see a link for case rebuild on the loose bearing race issues for this trans.
What solenoid was bad on your trans.. im having similar issues and am at the end of my witts
Tap in 4 small screws around the inner race, into the aluminum case. Tack weld to the race itself so it cannot move. Make sure the welds don't interfere with the planet. When you press everything back together, there's enough play in the center bearing to not affect its operation. Done this several times and have kept tabs on the customers vehicles. Oldest one in operation has been 2.5 years with 40k miles so far.
amazing tutorial, i hope one day you can help us with another tutorial related to the u 140 e transmission,(i have problems assembling my transmission cause i dont understand the ammount of clutches under and of top of the ctr support) thank you so much.
Is there anyway to know which one is solenoid B on the U760E valve body ? Any position?
Im almost at the end of your video.. is there anyway you could tell me which solenoid exactly is the torque converter solenoid
Show and nominate the piston for reverse
You good man👍
i have mazda with fw6a-el transmission that is made by aisin
can i use toyota ws atf in it since it closely related to u660e except fw6a-el has wet clutches?
Can the U760e transmission be replaced instead of the U660E
It depends on a lot of circumstances. I can connect you with one of our technical advisors to answer this for you. Please email all of your contact information to techemail@atra.com and we'll set something up.
❤