Saved my life. Its working again. I've tried everything checked wires, reset etc. Then I tried this vídeo. Turn off the batery, press together on/source + back + return. Turn on the energy and then release the buttons. Will turn on the radio and display Memory clear or something like that. Thanks
Можно ещё попробовать зажать кнопки source+back и подать питание мне только так помогло (это типа хард ресет!!, А кнопка что под панелью сбрасывает в режиме софт ресет)
Hi, got same issue today(01/03/2023), but for me the model is KD-X250 BT. The day before got a regulator issue, then rear left speaker was making some noise. Had checked it and found only a tweeter damaged. Removed the broken parts and was not that noisy as before....However when same message appeared, had tried same method, then all combination of keys, removing battery, tried several times the small reset push button at the rear of the detachable panel, but nothing worked. Checked the manual and found only 2 possibilities....1) If reset not working, to check the wiring and 2) If wiring ok to contact supplier. So had unplugged the rear connection, removed the wiring for the rear left speaker as I got issues with it the day before. Then push the reset button, switch it ON, and it was ok. Had placed some insulating tape on the cable near the connection at the rear of the speaker, and connected it back. Till now, it is working fine. So guess when you get this message, you really need to check your wiring which go to your speakers. You need to disconnect one by one at the rear of your player, reset it each time till you get the faulty cable.
He didnt solve sht.. it will work for a couple of hrs and then go back to mis wiring mode... you have to clean back plate wire veins sometimes they corrode or short out
I have this problem too recently. I just got a car 2 weeks and im building speakers and a subwoofer into my car. Radio is a Kenwood kcd dab960bt. What i think is the problem in my case, is that my car(opel astra g) battery is very low on power. If i turn the radio off and drive a bit, then try it again it works.
Saved my life. Its working again. I've tried everything checked wires, reset etc. Then I tried this vídeo.
Turn off the batery, press together on/source + back + return. Turn on the energy and then release the buttons. Will turn on the radio and display Memory clear or something like that.
Thanks
at least put a caption as to what are you doing... All I see if fingers pressing on buttons..
Можно ещё попробовать зажать кнопки source+back и подать питание мне только так помогло (это типа хард ресет!!, А кнопка что под панелью сбрасывает в режиме софт ресет)
Would be hella fuckin tight if the VIDEO WERENT MIRRORED
Hi, got same issue today(01/03/2023), but for me the model is KD-X250 BT. The day before got a regulator issue, then rear left speaker was making some noise. Had checked it and found only a tweeter damaged. Removed the broken parts and was not that noisy as before....However when same message appeared, had tried same method, then all combination of keys, removing battery, tried several times the small reset push button at the rear of the detachable panel, but nothing worked. Checked the manual and found only 2 possibilities....1) If reset not working, to check the wiring and 2) If wiring ok to contact supplier.
So had unplugged the rear connection, removed the wiring for the rear left speaker as I got issues with it the day before. Then push the reset button, switch it ON, and it was ok. Had placed some insulating tape on the cable near the connection at the rear of the speaker, and connected it back. Till now, it is working fine. So guess when you get this message, you really need to check your wiring which go to your speakers. You need to disconnect one by one at the rear of your player, reset it each time till you get the faulty cable.
Tha Ku. Better. Than this damehWtf did he even do!? ! ?
can you explane how you do it?
How did you solve that check wiring issue.. Please let me know
He didnt solve sht.. it will work for a couple of hrs and then go back to mis wiring mode... you have to clean back plate wire veins sometimes they corrode or short out
@@chuysalazar466 what are wire veins?
@@chuysalazar466 😊
Eres pésimo haciendo tutoriales amigo no like
Just remove panel and find the reset hole and reset it...
How
Hy sir I’m probluime in jvc send service or protecting reset
Bilahi wadahli mlih ana andi nafs lmochki mhabletno
I have this problem, kenwood kmr-m322bt on this model, if you can help me how to solve it?
I have this problem too recently. I just got a car 2 weeks and im building speakers and a subwoofer into my car. Radio is a Kenwood kcd dab960bt. What i think is the problem in my case, is that my car(opel astra g) battery is very low on power. If i turn the radio off and drive a bit, then try it again it works.
Aonde fica o ci de proteçao
Kayak mn cara ny om
Macam mana pula ini caranya bikin video. Tdk jelas lha bang tombol yg ditekan.
brother for me does not work, can you help with more details?
Bro wtf are you doing didn’t even explain nothing
У меня такую ошибку выдаёт. Что вы нажимаете? А то у меня другая модель gvc.
Doesn't work
Salam momkin nemra téléphone
? ???
WTF is this video about??????