Man thank you for this video, I’m a millwright apprentice and the other millwright who works these robots is in school tmrw and it will be me in that area and this video is really gonna help me figure out what I’m doing, so thank you!!!
@Rahul The question you have is about the interpolation types. MoveP = Moves the robot position based on the points. MoveL = linear welding. (The robot welds line to line following the points.) MoveC = circular welding. (Using 3 points [start, amplitude, and end.] Makes a curved weld.) MoveLW = Linear weaving. (Using 1 start point 2 amplitude (weavep) points and 1 end point you can have a zigzag straight weld.) MoveCW = Circular Weaving. Same as above, just circular. @Thor That's cartesian mode for X,Y,Z you can also move the robot on many different ways including quantitative movement, tool, and even moving each joint of the robot on it's own. I would probably be careful doing any of that though as it could really mess things up if you have no idea what to do. Adjusting weld parameters is very simple, all you must do is go to the start of the weld and select the programming box and press enter. You should have a popup menu (if not locked out) and you can adjust your parameters there. Careful modifying parameters if you don't know what you're doing, that can result in a lot of bad welds, no welds, or burn through depending on your materials.
Yeah I’m dealing with the same person right now so frustrating and he legit told me he doesn’t want to train me due to job security. Thank god I found this video
Hey guys, I’m currently being taught how to use one these robots at my work. Where would you suggest I go to actually learn this stuff? Im a welder full time at my plant but I wanna get into robotics and cnc work. Where do I start?
It takes some practice at first to get the right angles and distance. Make sure you are trimming your wire stick out to the correct length before programming your moves.
@@MikeD4 I find the model number (YA-1TA )(G III controllers TAWERS)of the robot that I work with that. Actually now I need to contact with manufacturer but I don't know how can I send and email for requesting help. Can you tell me the manufacturer email address please?
Ernesto Fuentes I am not sure what lpck is? If you mean the table lock, switch the left upper switch on the front to straight up and down. You can then rotate the table and get it locked back in place
We have been busy this year and I have not created any new videos. I just got a 4'x10' robot welder from Miller that I hope to shoot some videos on soon
Go into teach mode and select f1 then robot icon at bottom left then you get options x, y, Z, theese are all different movements, I'm not an expert I'm still learning myself
MoveL is linear movements. These should be used during most weld positions and tight areas of air cuts. MoveP. Is point to point or otherwise known as joint movements. These should be used for quick air cuts. Not for weld points for they are less accurate than MoveL is. MoveC are circular points. These require a minimum of 3 points. MoveLW is linear weave. MoveCW is circular weaving. Weave P is an attribute for weaving.
Goodnight. Friend, I operate a powermig panasonic MT 1800 welding robot, it is to ask you how to make the robot work by welding several pieces at the same time without having to make them one by one, if not from the first one you can leave the others . Thank you... Greetings from Colombia
How to feed a new program in this robots specially when there is circular interpolation?please upload the video on this.and please suggest me how can i learn its concept.
Man thank you for this video, I’m a millwright apprentice and the other millwright who works these robots is in school tmrw and it will be me in that area and this video is really gonna help me figure out what I’m doing, so thank you!!!
@Rahul The question you have is about the interpolation types.
MoveP = Moves the robot position based on the points.
MoveL = linear welding. (The robot welds line to line following the points.)
MoveC = circular welding. (Using 3 points [start, amplitude, and end.] Makes a curved weld.)
MoveLW = Linear weaving. (Using 1 start point 2 amplitude (weavep) points and 1 end point you can have a zigzag straight weld.)
MoveCW = Circular Weaving. Same as above, just circular.
@Thor That's cartesian mode for X,Y,Z you can also move the robot on many different ways including quantitative movement, tool, and even moving each joint of the robot on it's own. I would probably be careful doing any of that though as it could really mess things up if you have no idea what to do.
Adjusting weld parameters is very simple, all you must do is go to the start of the weld and select the programming box and press enter. You should have a popup menu (if not locked out) and you can adjust your parameters there.
Careful modifying parameters if you don't know what you're doing, that can result in a lot of bad welds, no welds, or burn through depending on your materials.
Thanks just started working with this robot and my teacher has really bad English so hard to understand and your video is a lot clearer?
Yeah I’m dealing with the same person right now so frustrating and he legit told me he doesn’t want to train me due to job security. Thank god I found this video
Top Notch Video ...make more please ;)
Thank you
can you give me the adjustment for the post to weld and the Tension, intensity and speed
I appreciate that
how did you do it can you share with me , thank you
The servor doesn’t turn on. What is the problem?
Hey guys, I’m currently being taught how to use one these robots at my work. Where would you suggest I go to actually learn this stuff? Im a welder full time at my plant but I wanna get into robotics and cnc work. Where do I start?
joe gomulka Miller has a school they can send you if they are interested in buying one
i attended miller's 1 week training coarse in Chicago this past week. its complicated but I have a good idea now. I suggest you attend.
Tony Bowers I assume James Manning was your teacher? Carol Stream Illinois?
Thanks man need more video
I would like to get in touch with you I just started my career doing what your doing and I’m struggling on programming touch points
It takes some practice at first to get the right angles and distance. Make sure you are trimming your wire stick out to the correct length before programming your moves.
Sir master program me input kaise dalte h
Dear sir you are doing great job, please help me for teaching and program of Panasonic robot
Hello mate! Have you got some manuals for this pendant ? Thanks
LowGraviTV I don’t have anything
Ok Thank you
Michael David I can send you a zip file for the manual if you like.
I have some PPT WHICH help you to make program and advanse command
@@mustakshaikh6108 Can you help me out brother
Hanzhen harmonic drive gear ,
strain wave reducer, robot joint ,
over 30 years experience
Hi . How can I find this robot machine manuals because I'm trained right now and I want the guidance notes .please let me know. Thank you
You would need to contact the manufacturer for those
@@MikeD4 I find the model number (YA-1TA )(G III controllers TAWERS)of the robot that I work with that. Actually now I need to contact with manufacturer but I don't know how can I send and email for requesting help. Can you tell me the manufacturer email address please?
Pls do another video about robot teaching
Sir please once again you tell that full detail about robotic welding kit and uses of full buttons please
Hi! Can you tell me how to activate the lpck when the table has been rotated, please?
Ernesto Fuentes I am not sure what lpck is? If you mean the table lock, switch the left upper switch on the front to straight up and down. You can then rotate the table and get it locked back in place
Do you mean TO SET THE MODE SWITCH TO AUTO MODE? WE TRIED THAT BUT HAD NO LUCK. sorry about the capita letters i kust notice. Lol
Can you please tell me , how to teach movelw weaving weld??
We have been busy this year and I have not created any new videos. I just got a 4'x10' robot welder from Miller that I hope to shoot some videos on soon
@@MikeD4 I m currently programming that one
how to make a new program.
Hello sir I want to see your videos in hindi language please give me solution
Praveen Kumar sorry, I do. It have a solution for you
Na
What is use of MOVER moveL or what difference each athore
Go into teach mode and select f1 then robot icon at bottom left then you get options x, y, Z, theese are all different movements, I'm not an expert I'm still learning myself
MoveL is linear movements. These should be used during most weld positions and tight areas of air cuts.
MoveP. Is point to point or otherwise known as joint movements. These should be used for quick air cuts. Not for weld points for they are less accurate than MoveL is.
MoveC are circular points. These require a minimum of 3 points.
MoveLW is linear weave.
MoveCW is circular weaving.
Weave P is an attribute for weaving.
I'm a service engineer of Panasonic Robot in North India.
Great sir
Do you know how to set hot speed, i'm interesting to a make progam weld robot panasonic
sandhy redhat no, I am not familiar with that
I want to know easy system
Goodnight. Friend, I operate a powermig panasonic MT 1800 welding robot, it is to ask you how to make the robot work by welding several pieces at the same time without having to make them one by one, if not from the first one you can leave the others .
Thank you...
Greetings from Colombia
How to feed a new program in this robots specially when there is circular interpolation?please upload the video on this.and please suggest me how can i learn its concept.
Let me know when your ready to take your programming to the next level.
Sir please new program kaise banate
Also make all video in teach panel
Juam kese kare
the best of the world!
Tem como fazer um vídeo deste explicando em portugues por favor? Obligado
How to create program in panasonic robort ?
I don't have a Panasonic so I cannot help you on that
Michael David ohoo
Can you help for yaskawa robot programming how can I create .
Make clamping decamping video
Sir plz video make in how to programming and adjusting parameters
you need to attend the 1 week training coarse at their Chicago facility. I was just there this past week and have a fairly good understanding now.
Very nice
yogesh thakor ..Hi yogesh
This video can explain in hindi
Sagar Jadhao
Thank god for this video. Piece of shit lead at my work gatekeeping.
Ok
please tell in Hindi language