Ramp1 - 200f to 1020F no hold. ramp2 -69F to 1145F no hold, Ramp 3-200F to 2000F no hold, Ramp 4- 108F to 2225F 11minute hold, Ramp 5 -9999F to 2000F no hold, Ramp 6- 145F to 1750F hold 45 minutes, or ,1hour for Randys red. ramp 7 -69F to 1700 for extra crystals in Rutile glazes and Randys red. End.
Loved Jacqueline’s pieces…will we see the tile wall piece(s) complete/assembled in the near future? Also amazed at how flat the pcs remained after firing….I struggle with warping on my flat/tile pcs and even dinner plates…how do you keep them from warping?
Love all your videos. I’m about to try my first batch of Randy’s Red glaze based on your video, have you tried it using Gillespie Borate replacing the Gerstley Borate? Did you make other changes?Thanks for all you do, hoping to visit this summer!
I had some trouble with the substitute so just mix a small batch. It may have been my mistake but I am not sure. I ended up adding extra EPK and iron oxide to make it work. I then mixed up a batch with my remaining Gerstley Borate and it worked fine.
Vaughn--- Not sure if at some point you were into mason stains. - I use mason stains (MS) for flowers and leaves. I fight with all the greens. Often my beautiful mint green becomes ugly brown once clear glaze is applied. I've tried Amaco clear, zinc free and finally matte clear to maintain the green color. No luck. I mix my MS with b-mix to the desired color value, bisque at 04 and fire at cone 5. I've checked all of kilns and they're fine. Any guesses or suggestions?
It could be Gerstley Borate, Mason Stain calls it Gastley Borate, it changes the colour response of their stains. There is a book on colour response to different glaze chemicals, If you do not have it look it up on Amazon Glazes cone 6 by Michael Bailey. I have a copy of it but it would involve a lot of testing. You can call Mason Stain directly and ask them, they have a technical dept.
They need to be sharp, the points can bend over which makes them stick to glaze more, those need to be straightened. I also glaze thin on the Botton by wiping the base on a water saturated sponge before dipping in glaze.
Incredible results! LOVE, LOVE, LOVE those berry bowls💕
Happy to (finally 😅) see a kiln unloading video. The mug are spectacular, as always.
interesting way to attach the wide handle...on the trays... cool
beautiful , love the colors..
So great! So cute! All the best :D
Vaughan, I always look for your new videos. They always inspire me. Would you mind sharing your Cone 6 glazing schedule. TIA from Ontario.
Ramp1 - 200f to 1020F no hold. ramp2 -69F to 1145F no hold, Ramp 3-200F to 2000F no hold, Ramp 4- 108F to 2225F 11minute hold, Ramp 5 -9999F to 2000F no hold, Ramp 6- 145F to 1750F hold 45 minutes, or ,1hour for Randys red. ramp 7 -69F to 1700 for extra crystals in Rutile glazes and Randys red. End.
Very nice!
Спасибо большое за вашу работу 🌹 Я включаю ваше видео и сразу появляется вдохновение работать☀ Желаю вам благополучия и прекрасного настроения 🌅
Всегда пожалуйста. Нам всем повезло, что в нашей жизни есть гончарное дело, которое связывает нас с 5000-летней историей производителей глины.
Loved Jacqueline’s pieces…will we see the tile wall piece(s) complete/assembled in the near future?
Also amazed at how flat the pcs remained after firing….I struggle with warping on my flat/tile pcs and even dinner plates…how do you keep them from warping?
Slow drying is key using a damp cupboard, also weighting the edges of the tiles and have them sitting on a porous surface.
I like “umph” in a bowl 😊
Your tankards are awesome!
Beautiful tankards! Can I ask what you use to sign and do you have a video of this I could see?
LUG 1 underglaze.
Love all your videos. I’m about to try my first batch of Randy’s Red glaze based on your video, have you tried it using Gillespie Borate replacing the Gerstley Borate? Did you make other changes?Thanks for all you do, hoping to visit this summer!
I had some trouble with the substitute so just mix a small batch. It may have been my mistake but I am not sure. I ended up adding extra EPK and iron oxide to make it work. I then mixed up a batch with my remaining Gerstley Borate and it worked fine.
@@Vsmithpots Thank you so much!
Vaughn--- Not sure if at some point you were into mason stains. - I use mason stains (MS) for flowers and leaves. I fight with all the greens. Often my beautiful mint green becomes ugly brown once clear glaze is applied. I've tried Amaco clear, zinc free and finally matte clear to maintain the green color. No luck. I mix my MS with b-mix to the desired color value, bisque at 04 and fire at cone 5. I've checked all of kilns and they're fine. Any guesses or suggestions?
It could be Gerstley Borate, Mason Stain calls it Gastley Borate, it changes the colour response of their stains. There is a book on colour response to different glaze chemicals, If you do not have it look it up on Amazon Glazes cone 6 by Michael Bailey. I have a copy of it but it would involve a lot of testing. You can call Mason Stain directly and ask them, they have a technical dept.
@@Vsmithpots Thanks so much for the info. I WILL solve the problem--- Florida Pam
What do you do to keep your stilts from sticking to the bottoms?
They need to be sharp, the points can bend over which makes them stick to glaze more, those need to be straightened. I also glaze thin on the Botton by wiping the base on a water saturated sponge before dipping in glaze.
22:00 is the big mixing bowl still available? With matte green inside
Yes, I have not put it into the showroom yet, it is $95CA.
I'm emailing you about it! Thank you so much ❣️💙