Once again, a good job explaining how to properly care for and use a Ventrac feature. After seeing the dry mud fall out, it looks like it would be a good idea for maintenance purposes for users to periodically remove the outer wheels and clean out all debris that may have collected between them and the inner wheels rather than never remove the outer wheels even if there otherwise is no reason to take them off.
Very good advice. I hadn't thought of vines getting intertwined between the wheels. Thanks for the tip. Is there any particular torque wrench you recommend?
@@bluecordprecisiongrading2504 I got the 4520Z. The Y is hard to find right now. Got the dual wheels, power bucket/grapple, 72” flail mower, tough cut mower and power rake. Really trying to do my research on the power rake, that’s what I’m excited to play with. Have a long steep driveway and after 20 years of snow and sand there’s mounds to each side of the driveway I want to bring down. Also have a few gravel driveways that go to barns I’d like to clean up.
@@bluecordprecisiongrading2504do you have one of each? Felt like yours way a Y. I just know some guys that make their own diesel. If shit gets too wild, making your own juice might be the only way to make it go 😂
Good Morning - I get a lot out of your videos and I appreciate your candor. I’ve ordered a Ventrac 4500Y and am anxiously awaiting the delivery (about 4 weeks out at this point). I have a couple of questions for you. 1) As I’m getting the double wheel kit as well, I’d like to get the PVC caps to have on hand . They appear to be about 2”, but it would be great to know for certain. 2) I see you carry a sidearm. I assume it’s for snakes as your area of the country has an abundance of copperheads and rattle snakes. 3) Having only learned of the VenTrac less than a month ago, I’m still in learning mode. I’ve ordered the bucket with grapple, power rake, terra rake, 6’ plow, canopy, rear hitch / hydraulics and some other stuff. I’m not in business, but am retired and doing my best to maintain 5 very sloped acres safely. Looking forward, is there anything that pops out as being missing from my inventory? Again, you’re appreciated and thank you for your service! John T
Hi, John. Have you had a chance to demo a Ventrac first? Even if you have, you're going to love it more than you realize! 1. The caps come with the dual wheel kit so there's no need to buy them separately. 2. As far as my sidearm, I carry it for a number of reasons. For every aspect of my life I'm prepared for as much as I can be. 3. The Power Rake can do what the Terra Rake does and a whole lot more so I never saw the need to buy a Terra Rake but that's my preference. As far as anything being "missing" from your inventory is dictated by what you're planning to do. I see you didn't list a mower of any kind. I have a 72" Finish Cut and Tough Cut. I hope that I answered your questions. Please feel free to reach out whenever you like. -Bradley
Thank you for the information! Yes, I had a demo, but I knew before that happened that we were going to get one. I’ve spent the last ten years working our property and transformed it significantly, but I’ve taken it as far as I can both physically and mechanically - everything that’s left requires more oomph than I’ve had. REALLY looking forward to getting it! I forgot the tough cut - that’s what I’ll be mowing with until more areas are “lawn worthy” - I have a zero-turn, but because of the slopes I’m restricted by the “pucker factor” element. Our soil structure is very rocky and soil needs to be amended to provide a good base for a lawn. Amen to being prepared! It’s one of many reasons why we’re in Idaho. We’d appreciate any advice you might want to throw our way. Again, a hearty thank you!
@@johnt2190 I get quite a few calls from other Ventrac owners and I'm happy to talk with them and to you if you need it. Idaho is a great place! I've been through there on my drive back from Fairbanks to Philly.
@@johnt2190 how’s it going after having it a year? I just ordered mine, went with the 4520Z, diesel “Y” is hard to get right now. Got dual wheel kit, a Power Bucket/Grapple, Tough Cut, 72” Flail and Power Rake. I’m in New Hampshire, so hills and rocks everywhere but when I demoed last fall the thing was amazing. I used the tough cut and the flail mower. So impressive. Would love to hear how your year went with it.
Noted but for the wheels that will not spin off ccw, I had to install my Versa loader, attach a strap around the outer tire wheel assembly and set strap to when you push bucket forward it grabs tire in a ccw rotation.
Once again, a good job explaining how to properly care for and use a Ventrac feature. After seeing the dry mud fall out, it looks like it would be a good idea for maintenance purposes for users to periodically remove the outer wheels and clean out all debris that may have collected between them and the inner wheels rather than never remove the outer wheels even if there otherwise is no reason to take them off.
I do take them off when mud or vines get caught in there as the valve stem can get damaged if you don't
Very good advice. I hadn't thought of vines getting intertwined between the wheels. Thanks for the tip. Is there any particular torque wrench you recommend?
Glade I found your channel am looking at a ventrac Purchase hopefully this year
Thank you! I hope that you're enjoying the videos I'm making. Please be sure and subscribe! Ventrac is a GREAT machine!
Good stuff!
Got my order in…looking forward to playing with my new machine.
That's awesome. What did you order?
@@bluecordprecisiongrading2504 I got the 4520Z. The Y is hard to find right now.
Got the dual wheels, power bucket/grapple, 72” flail mower, tough cut mower and power rake. Really trying to do my research on the power rake, that’s what I’m excited to play with. Have a long steep driveway and after 20 years of snow and sand there’s mounds to each side of the driveway I want to bring down. Also have a few gravel driveways that go to barns I’d like to clean up.
@@JoeFidler the Z is better anyway... in my opinion
@@bluecordprecisiongrading2504do you have one of each? Felt like yours way a Y. I just know some guys that make their own diesel. If shit gets too wild, making your own juice might be the only way to make it go 😂
@@bluecordprecisiongrading2504 I love your videos.
Actually the whole Ventrac community of TH-camrs is fun to watch. Super solid content.
Good Morning - I get a lot out of your videos and I appreciate your candor. I’ve ordered a Ventrac 4500Y and am anxiously awaiting the delivery (about 4 weeks out at this point). I have a couple of questions for you.
1) As I’m getting the double wheel kit as well, I’d like to get the PVC caps to have on hand . They appear to be about 2”, but it would be great to know for certain.
2) I see you carry a sidearm. I assume it’s for snakes as your area of the country has an abundance of copperheads and rattle snakes.
3) Having only learned of the VenTrac less than a month ago, I’m still in learning mode. I’ve ordered the bucket with grapple, power rake, terra rake, 6’ plow, canopy, rear hitch / hydraulics and some other stuff. I’m not in business, but am retired and doing my best to maintain 5 very sloped acres safely. Looking forward, is there anything that pops out as being missing from my inventory?
Again, you’re appreciated and thank you for your service!
John T
Hi, John. Have you had a chance to demo a Ventrac first? Even if you have, you're going to love it more than you realize!
1. The caps come with the dual wheel kit so there's no need to buy them separately.
2. As far as my sidearm, I carry it for a number of reasons. For every aspect of my life I'm prepared for as much as I can be.
3. The Power Rake can do what the Terra Rake does and a whole lot more so I never saw the need to buy a Terra Rake but that's my preference.
As far as anything being "missing" from your inventory is dictated by what you're planning to do. I see you didn't list a mower of any kind. I have a 72" Finish Cut and Tough Cut.
I hope that I answered your questions. Please feel free to reach out whenever you like. -Bradley
Thank you for the information! Yes, I had a demo, but I knew before that happened that we were going to get one. I’ve spent the last ten years working our property and transformed it significantly, but I’ve taken it as far as I can both physically and mechanically - everything that’s left requires more oomph than I’ve had. REALLY looking forward to getting it! I forgot the tough cut - that’s what I’ll be mowing with until more areas are “lawn worthy” - I have a zero-turn, but because of the slopes I’m restricted by the “pucker factor” element. Our soil structure is very rocky and soil needs to be amended to provide a good base for a lawn. Amen to being prepared! It’s one of many reasons why we’re in Idaho. We’d appreciate any advice you might want to throw our way. Again, a hearty thank you!
@@johnt2190 I get quite a few calls from other Ventrac owners and I'm happy to talk with them and to you if you need it. Idaho is a great place! I've been through there on my drive back from Fairbanks to Philly.
@@johnt2190 how’s it going after having it a year?
I just ordered mine, went with the 4520Z, diesel “Y” is hard to get right now. Got dual wheel kit, a Power Bucket/Grapple, Tough Cut, 72” Flail and Power Rake. I’m in New Hampshire, so hills and rocks everywhere but when I demoed last fall the thing was amazing. I used the tough cut and the flail mower. So impressive. Would love to hear how your year went with it.
Nice video. Thanks for sharing. What type of grease do you use on the threads?
The same grease that Ventrac recommends for the fittings, a Lithium Complex NLGI #2. I like to keep things simple
Thanks
Noted but for the wheels that will not spin off ccw, I had to install my Versa loader, attach a strap around the outer tire wheel assembly and set strap to when you push bucket forward it grabs tire in a ccw rotation.
Interesting! That thing must have really been frozen on there! I'm not sure how much force those hub extensions can take before they bend
@@bluecordprecisiongrading2504 heck yea, all four hubs were like that, I put some anti-seize on threads so hopefully next time spin off by hand
@@randallray9324 anything to make life alittle easier the next time!
would you recommend fluid in your tires or would it make it too hard for you to take them off and on?
I have done this for years and still have some tires filled with ballast for the dual wheel kit and some without
Is the thread protector a threaded pvc cap or a purpose made tool?
It's just a threaded PVC pipe plug :)
Would I get the caps with the trackter all so
The white caps come with the dual wheel kit
It takes way to long to power wash between the tires. Looks like I should just remove them to clean.
That's how I do it most of the time
What are some common reasons for going 4 wheels vs 8?
Not many. The most common for me is a more narrow track to get into tighter spaces. I run 8 wheels almost all the time
Once in a while I have a stump grinding where I take the time to spin them off but I do most stump grinding work with them on
Shorter on sidewalks when plowing. The outer wheels will hang off the curb.
Sir my name is George sir so what is the size is the sockets sir
I use a 27mm socket for the draw bolts