AC Energy Meter Using Arduino With Code and Circuit || Proteus Simulation
ฝัง
- เผยแพร่เมื่อ 3 ก.พ. 2023
- In this video you will learn about AC Energy Meter Using Arduino.
How to measure AC Energy With Arduino.
How to measure AC Voltage With Arduino.
How to measure AC Current With Arduino.
How to measure AC Power With Arduino.
Measure AC Energy with Arduino - AC Energy Meter.
AC Energy Measurement using Arduino.
Measure AC Energy using Arduino.
Arduino AC Energy meter Project.
Measuring Energy with Arduino.
AC Energy Measurement.
How can I measure AC Energy with my Arduino?
Arduino 220V AC Power meter.
Simple AC Energy Meter with Arduino.
Electricity Energy Meter using Arduino.
Make A Simple Arduino Energy Meter.
Make an AC Wattmeter using Arduino UNO.
Simple Arduino Home Energy Meter.
AC Electricity Energy Meter.
Arduino Energy meter.
Arduino Code & Proteus Circuit Download Link:
drive.google.com/file/d/1hvHb...
EmonLib-master Library for Arduino Download Link:
drive.google.com/file/d/18GC6...
Measure AC Current With Arduino:
• Measure AC Current Wit...
AC Voltage Measurement With Arduino:
• AC Voltage Measurement...
Measure DC Current Using Arduino & ACS712 Sensor:
• Measure DC Current Usi...
Measure DC Voltage Using Arduino:
• Measure DC Voltage Usi...
Related Videos:
• Arduino Tutorials
If you need any help contact me or Leave your comments below.
My Facebook Page: / sparkeeprojects
Join My Facebook Group for More Projects:
groups/never... - วิทยาศาสตร์และเทคโนโลยี
Good job
Thanks for Watching
Great work bro🤘
Thanks for Your Appreciation.
Thank you... Kindly add frequency on the display.... More helpful for me.... Thanku
Frequency option is also available in the library, kindly enable that. Thanks
@@thebrightlight9472 Thanku
Sir can you please help on the build up of the circuit and the components used to design energy metering system circuit
How can I help you.?
Fabulous
Thanks 👍
I know some student bought the elements and wired them all as you explained but still facing problems that the LCD doesn't work though same code and design as yours.
Any suggestions?
Thanks
You may have some loose or incorrect wiring then.
Hello Sir thanks for this video but i'm facing issue whenever i'm changing load resistance it is displaying same value of current on LCD, but the value from ammeter is different
Thanks for appreciating my work.
The ACS712 current sensor used in this video features three modules with varying current measurement capabilities: 5A, 20A, and 30A. Each module is designed to accurately measure currents up to its designated maximum: 5A for the 5A module, 20A for the 20A module, and 30A for the 30A module. The issue you're experiencing may be due to using the 5A module sensor and the circuit current exceeds 5A. To resolve this, adjust the resistance value to ensure the current remains below 5A. If you need to measure currents up to 30A, consider upgrading to the ACS712-30A sensor module, which can accurately measure currents up to 30A. Please note that the sensor used in the video demonstration is limited to measuring currents up to 5A. For measuring higher currents, you'll need to select the appropriate sensor module (20A or 30A) based on your specific requirements.
we do we need to attach another ac source with current sensor ??
No. Supply will be the same
Thanks a lot for the video
Can you explain that circuit with transformer?
Kindly watch the video. Everything is explained with details. If need more help let me know. Thanks
@@thebrightlight9472 Thanks. I got the answer. I was thinking about the capacitance and resistor values actually. I got the answer. Thanks
Capacitor, Resistors and Transformer values are explained in video with details. Thanks 😊
Thanks bro 🙏
Welcome
Can I get an English version? Your work is amazing
Thanks for Appreciation. You can use the subtitle Option. I think Now-a-days TH-cam have the option to automatically play the videos with English subtitles.
Subtitle can't activate it sir
@@thebrightlight9472 Only get the option of subtitles in Hindi. That's a pity really.
"Unable to open HEX file 'C:\Users\Hp\AppData\Local\Temp\arduino_build_30989/AC_Energy_Meter_Code.ino.hex'"....I keep getting this as fatal execution error... please guide me sir
Kindly don't copy the inverted comma's (" ") with the Hex file address.
Can you add grief data and send it to the phone? If so, please help me
You can download the data from the video description.
sir insert buzzer when after current limit low and high
You can add it
sir can you tell which software you are using ?
I'm using Proteus 7. You can download from here:
th-cam.com/video/ET-tTFbq1OE/w-d-xo.html
The link you have provided for the code was not opening.
Open it with WinRar file
Dear, What about power factor? Ac power not complete without powerfactor
You can add that feature as well.
Arduino keeps asking me to select a board type .. What should I do
Select the relevant board
Woowww sir nice project but can you please tell that the energy reading is saved?
Thanks for Appreciation. For energy saving you can use the EEPROM. EEPROM is a permanent memory in Arduino.
@@thebrightlight9472 thanks but please can you tell me how to do so
You can get help from Google. Just search for how to save values in EEPROM. You will get everything.
Ok thank you very much
You're Welcome
Can you tell how to implement this circuit on bread board
As shown in video
I dont understand how to make it on bread board how to use currenct sensor on bread board please can you help
Method is same is in simulation
What is the size of your LCD
20x4 LCD
Sir agar koi load lagana hai, to wo kaha connect kare circuit me?
AC Source (220V) k sat connect kr lo.
@@thebrightlight9472 thank you sir
You're Welcome
How to view the output in thingspeak?
Interface ESP8266 Module and add the code for it. Then you can upload the data to ThingSpeak
@@thebrightlight9472 thank you sir
@@thebrightlight9472 is there any video related to it which u have uploaded?
Sorry till I don't have any video.
Can you send me hex file?
Arduino code is available in the video description, kindly download from there, open it in Arduino IDE and then generate the Hex file from there.
hellow sir
can u inform me how to add bluetooth and connect it with my smartphone ?
or blynk instead ?
I will mark video on it and will share with you.
@@thebrightlight9472 thank you
i'll be waiting for it
my lcd shows in power in minus and energy in minus
Kindly follow the proper wiring and Code. Also you can download my simulation file and code from the link available in the video description.
@@thebrightlight9472 SIR EVERYTHING LOOK OK PROPER WIRING BUT VALUE IN MINUS
@@thebrightlight9472 THANKS SIR I USE 50K RESISTANCE ON SENSOR SUPPLY, THEREFORE THE VALUE IN MINUS, NOW I SET THE RESISTANCE IN 50 OHM, NOW ITS WORKING.😍
That's why I was saying that follow the proper wiring and code. Congratulations that your circuit is working now.
Please keep in mind that the circuits or codes that I upload here are in 100% working mode, and you will need to just follow the step by step method. 😊 😊
Wow...nice work sir. Can I get your contact email please?
Thanks for Appreciation.
Please tell me here. How can I help you.?
@@thebrightlight9472 I am trying to make an energy consumption monitoring simulation as like our household used with out off energy meter. I have made little bit modification by adding a push button switch in between load and current sensor of your simulation project. But, millis() is running always unable to reset or stop as and when required according to load on /off. Added some condition in sketch but unable to solve. Please help me to sort out this issue.
For that you should to use the "TimerOne" Library. By using this library you can start and stop the millis() according to your own requirements. Please watch my below video. I have used the TimerOne Library in this video and explained that how it works. Also you can download the said library from the video description. If need more help, let me know. Thanks
Video Link is:
th-cam.com/video/J6wxrxvV2zE/w-d-xo.html
@@thebrightlight9472 thank you so much
You Welcome
i need whatsap number for more detail
i make energy meter with auto changeover 2nd energy meter
I don't use it
@@thebrightlight9472 i need help any messanger use