The tutorial for TUOLI TL-SP2 mini thermal photo printer phone skin print machine

Step 1: Scan the QR code and install the APP
Step 2: Press and hold the power button for 1 second to turn on the printer, open the APP, click "Photo Printer ", and then select the corresponding phone model
Step 3: Select the backing film drawing, then choose to add photos and print
Step 4: When the WIFI indicator is yellow, press "No" to configure the network, and then press “the new printer” to proceed to the next step.
Step 5: Press the WIFI button three times in a row until the product searches for WIFI, then enter the WIFI password and proceed to the next step. After the network is successfully configured, the WIFI indicator light changes from yellow to blue.
Step 6: Select the printer, add the printer name, and then press Print. After the transfer progress reaches 100, wait for about 10 seconds and the printer will automatically print.
1.The print film must be kept clean and flat， Place a piece of print film each time.

2.Please turn off the power when not in use, Cover the print box to prevent dust from entering.

3.Please install the ribbon correctly
4. Put one sheet of printing paper at a time
5.The printing time of each photo should be more than 3 minutes apart. Continuous printing is not allowed (the reason is that the inside of the printer is 300 degrees instantaneous high temperature. Continuous printing will damage the machine and the ribbon)
More detail about TUOLI TL-SP2 thermal picture printer welcome inquiry
Tina [phone]
wa.me/message/...
Wechat ID : Tuoli-technology