This is the only video that explains all of the buttons on the Hercules mixers and how to use them. I love it. it is better than the academy video. I give it 5 thumbs up.
Great starter deck honestly. Played around with it and for starting out it is a really good value deal. Yes you miss out on certain knobs like dry/wet and mid EQ but as a beginner you are busy with learning other tricks then to perfectly finetune the EQ. If you are comfortable and have properly explored all the functions of this deck you should also be good enough to upgrade to more decked out decks, but it's a good starting point. I facepalm every time I see a brand new DJ buying something like the Rane One, you immediately get to one of the finer DJ controllers out there so there is little beyond that. It can also be straight up overwhelming.
A few hidden features i found using the non Mk2 Version of this Controller & Djuced software (not sure if they work in Serato): 1. If you hold the Shift button, you can quickly zoom through a song much faster then normally spinning the deck. (kinda obvious) 2. If you press Shift + Hot Que, it changes in to effects mode so all the pads will Toggle effects, and Shift + Stems (or Roll) will change it to Sample mode, allowing you to play your sampler samples. < You covered this one) 3. Most helpful feature i just randomly figured out, Is if you press Shift + Headphone button (on either side) It will change the Filter knob out for one of the other effects in the Mixer, which you can also customize. This becomes helpful for quickly finding a effect for a transition other then the filter, while allowing each deck to have their own filter effect individually.
just stumbled up on this vid and I'm glad! I bought this controller for almost a month already, still learning and your vid greatly gave me important inputs
Excellent review and feature guide. I was looking for a video like this for a while now. I feel this controller is really amazing and the price's sweet.
18:10 how in the F is your scratch so clean sounding there? When I try this without cutting with the crossfader, it sounds like I'm murdering a cat on this controller 😂
Use mine for a back up to my Numark ns6 2 .. Perfect to practice on and have in your laptop bag when travelling , just in case there is a gig going on where u are
Would love to see DJay Pro being compatible with this! Not sure why it isn't since the Inpuls 200 is as well as the Inpulse 300 MK2! Kind of feeling like I should get this anyway with the thought of holding it out till DJay Pro is compatible.... What do you think djkit?
Would this be good for a kid who wants to learn to DJ? He has NO musical experience but is an avid fan of DJ music and old school style rap music sampling, etc.. Could it be used to make sampling style music recordings, or is it just for DJ'ing? Thanks.
RCA cable I require is master out and aux in type.... So can you please let me know a set of RCA cable type I need buy for my Hercules dj inpluse controller 200. I require 2 out 1 in aux type...
Great news for VirtualDJ and Phase users. The Phase Essential can now work without RCA cables via its HID Protocol in latest Early Access Build 7816 You will need to update your Phase to latest firmware version 8.
@@rianaasm it will work with Serato Intro. To use with Serato Pro you need to have a paid for license. If you do have a license then make sure it's a relatively recent version you're running.
#djkit My DJ controller is 200 MK2. But this product is not connecting to the computer. Despite many efforts, there is no benefit. Please suggest some solution.
@@KPSGadgets depends on the software you're using. But what you're suggesting is more advanced than the basic abilities of this controller out the box. If you're using Serato lite then you'd have to upgrade to get more functions and the ability to remap the controls
They had that for years, and it's still an option to adjust mid through Djuced. But I have to disagree I think the filter knob is a nice change up, I use it alot more often then I ever used that mid knob. Edit: it's actually wait better then i thought it was. If you press the shift button and press either of the Headphone buttons (The buttons to que your headphones to a decks side) It actually changes out the effect of that filter knob on the fly, So it can be a reverb, cut effect, wash out, phaser or a filter. AND you can change out these effects to any you want.
This is the most helpful and through video I’ve seen thus far. Thank you!
Glad it was helpful! Don't forget to sub for more!
This is the only video that explains all of the buttons on the Hercules mixers and how to use them. I love it. it is better than the academy video. I give it 5 thumbs up.
Great starter deck honestly. Played around with it and for starting out it is a really good value deal. Yes you miss out on certain knobs like dry/wet and mid EQ but as a beginner you are busy with learning other tricks then to perfectly finetune the EQ.
If you are comfortable and have properly explored all the functions of this deck you should also be good enough to upgrade to more decked out decks, but it's a good starting point. I facepalm every time I see a brand new DJ buying something like the Rane One, you immediately get to one of the finer DJ controllers out there so there is little beyond that. It can also be straight up overwhelming.
A few hidden features i found using the non Mk2 Version of this Controller & Djuced software (not sure if they work in Serato):
1. If you hold the Shift button, you can quickly zoom through a song much faster then normally spinning the deck. (kinda obvious)
2. If you press Shift + Hot Que, it changes in to effects mode so all the pads will Toggle effects, and Shift + Stems (or Roll) will change it to Sample mode, allowing you to play your sampler samples. < You covered this one)
3. Most helpful feature i just randomly figured out, Is if you press Shift + Headphone button (on either side) It will change the Filter knob out for one of the other effects in the Mixer, which you can also customize. This becomes helpful for quickly finding a effect for a transition other then the filter, while allowing each deck to have their own filter effect individually.
you are great thank you! i wish they explained this in the official tutorials lol
just stumbled up on this vid and I'm glad! I bought this controller for almost a month already, still learning and your vid greatly gave me important inputs
Is it compatabkr and do I have to pay a subscription ?
Excellent review and feature guide. I was looking for a video like this for a while now. I feel this controller is really amazing and the price's sweet.
Wicked video mate! Ali G in da house!
Great video. Well done. Good to see all the functions!
This is supposed to be for learners your saying words that not many people might understand if they’re just getting into djing
That’s what I’m struggling with :( I need it dumbed down even more than this
18:10 how in the F is your scratch so clean sounding there? When I try this without cutting with the crossfader, it sounds like I'm murdering a cat on this controller 😂
😂😂
Use mine for a back up to my Numark ns6 2 .. Perfect to practice on and have in your laptop bag when travelling , just in case there is a gig going on where u are
hello, is it heavy to carry around? does it sound good with an event size monitor? thanks:)
that literally can happen, done that a couple times now with random afters
Is it good for beginner?
Good to know that Mixxx now supports Stems so that is another option for software.
Would love to see DJay Pro being compatible with this! Not sure why it isn't since the Inpuls 200 is as well as the Inpulse 300 MK2! Kind of feeling like I should get this anyway with the thought of holding it out till DJay Pro is compatible.... What do you think djkit?
this was insanely helpful, thanks! Also if you could comment on the quality and feel of the hardware that'd be great as well!
I have this controller and I just hit load as my start of the song hot cue 😂. Freeing your hot cue point to be anywhere you need it
Is it wireless and can you Connect to the speakers with bluetooth??
Can you use this controller w the djay app on iPhone?
RCA cable type used and it's specifications or guides please so i can plug into my new boat speaker party pal 390.
Would this be good for a kid who wants to learn to DJ? He has NO musical experience but is an avid fan of DJ music and old school style rap music sampling, etc.. Could it be used to make sampling style music recordings, or is it just for DJ'ing? Thanks.
@@svttodd if you the included djuced software it has more features and will be enough for most beginners
I used mixxx with that device
Can I play the audio though my computer? Rather than plugging speakers into the RCA ports?
You can, I do this for my family parties via Bluetooth speaker
@@PhnXFire2k23thanks for the information brother!
I don’t know if I want the mk2 or just the impulse 200 cuz mk2 doesn’t have mid volume but it does have everything els 😊
Can you use this with djay on iOS???
Never used any decks before wise to get this to learn
Awesome Very informative vid! Cheers!! 🍻
RCA cable I require is master out and aux in type.... So can you please let me know a set of RCA cable type I need buy for my Hercules dj inpluse controller 200. I require 2 out 1 in aux type...
Im looking the video to buy one, still sorting out from which brand i should get one and in my unprofessional view the mk2 looks cleaner to me.
Great news for VirtualDJ and Phase users.
The Phase Essential can now work without RCA cables via its HID Protocol in latest Early Access Build 7816
You will need to update your Phase to latest firmware version 8.
I can’t get my controller to work in Serato Pro, it works just fine in djuced tho, help?
@@rianaasm it will work with Serato Intro. To use with Serato Pro you need to have a paid for license.
If you do have a license then make sure it's a relatively recent version you're running.
is there a drawback for going for the 300 mk2? other than price
how to input sound?
#djkit My DJ controller is 200 MK2. But this product is not connecting to the computer. Despite many efforts, there is no benefit. Please suggest some solution.
How do I set a sample. I wanna take vocals for a base drop but nooooooooo fck me I guess
@@KPSGadgets depends on the software you're using.
But what you're suggesting is more advanced than the basic abilities of this controller out the box.
If you're using Serato lite then you'd have to upgrade to get more functions and the ability to remap the controls
@ im using Djuced but I also have sureto pro
Recommended
Just got mine and the software sign-up is giving so much trouble... I set it aside. Maybe I was too saucy trying to set it up.
Should have removed the filter and just made a 3 band eq
They had that for years, and it's still an option to adjust mid through Djuced. But I have to disagree I think the filter knob is a nice change up, I use it alot more often then I ever used that mid knob.
Edit: it's actually wait better then i thought it was. If you press the shift button and press either of the Headphone buttons (The buttons to que your headphones to a decks side) It actually changes out the effect of that filter knob on the fly, So it can be a reverb, cut effect, wash out, phaser or a filter. AND you can change out these effects to any you want.
@@GhettoWxzrd How do you change them out?
@@Finlay-wi7lh^
Bro need help
@@raiyanansari6030 how can we help?
A short video is below 10 minutes. This is a VERY LONG video. But thanks...
Haha, yea. Apologies about that! Rather do the job thoroughly though, right? 😂
just go to sleep.