🙏 Watched the video yesterday and tried it today. It worked. Thank you so much. You save my time and money. I live in remote village. Nearest town is 5km away. Repair shop would have charged Rs50.
Thank you . Ask any problem, difficulty, when handling / repairing any technical home / workshop appliance, I shall guide you. Tell your friends, relations about my channel & url of this video.Thanks
if holding the central nut doesn't work....try holding the blades part with pliers!! holding nut didn't work with my jug but holding the whole blades worked!!!
Thank you very much Sir, for this video with precise instructions. Very helpful. It helped me to fix one jammed up and another tight blender. Thank you again !!!
It's not rusted, but my blender is very tight. It's too tight to rotate, i cannot rotate freely. I cleaned the blade many times, put oil on it, but still it is tight. I don't know how to fix it anymore. Please suggest what to do.
My smallest jar is not grinding anything, previously it was up working fine. What to be done? The white coupler and the blade rotates easily, but it does not come out. Please let me know what the problem is
Thank you very much...! For Bachelor's it was not that easy to clean the jar all the time... Especially if are with a lazy friend, so it has stuck. Now the problem was sloved... Thanks
Hi can you send me the link which you discussed in the video of washing the Jar after every use. My Chutney jar gets jammed frequently. I was able to fix the blade using your video. Thank you.
+tadepalli rao hello Mr Tadepalli there is no way you have to do the same thing as a showed in myvideo. you have to use force to remove that a coupler otherwise it will not come out, because it is been tightened by the motor force you to try to unscrew by using force using Player and and turning clockwise is the only way to take it out don't be afraid If It Breaks you replace it with a new one ok? let me know if you are happy thank you
tadepalli rao Hi All, please follow his instructions and after unscrewing coupler and blade, you should hit twice with a hammer from the inner side and twice from the outer side. Repeat this process a bit harder and the large screw will come out finally.
Thank you . Ask any problem, difficulty, when handling / repairing any technical home / workshop appliance, I shall guide you. Tell your friends, relations about my channel & url of this video.Thanks
Keep a round tube more then bush size, around the bush and supporting that tube on a hard surface hammer the shaft out of the bush if it doesn't come press or hammer the whole bush out of mixer base. Replace new bush and shaft assembly, lubricate using edible oil only in case of any doubt see my video th-cam.com/video/aZ_v4QqRknI/w-d-xo.html
Aagr nut /shaft ke aate=threads ghis gaye hai, to naye parts daliye. Poora grinder ka baryan mixer ki d ookan me sample dikhakar naye parts taiyyar rakhna. Aapka kaam poora hojane ke liye parts taiyyar hona bahut jaroori hai. Uprwale nut ko taait karne ke liye us size ka spanner / pakkad hona jaroori hai. Nut poora kas kar tait karna. Loose raha gaya to chalte chalte loose ho sakta hai. Bush aur shaft ke under sirf khaane ka tel hi daaliye . Machine oil mat daaliye, sehat ke liye bura hai. Aapko bahut shubhecchayen.
Threads in mixer, grinders are made other way , to keep them tight as the motor rotates. So, for unscrewing, it must be turned clockwise. Please try this, you will find. If turned anti clock wise ,it will get tightened &wont come out.
@@mybestesthobbies4347 To unscrew you turn clockwise the blades with your right hand , but from the other side, the base (we have a screw nail) we turn the nail counterclockwise with the right hand to unscrew ... isn't it??
You can open it any way. But if you open it from blade side, you must tighten the nut fully,using a spaner. If it remains loose, it may come off from the shaft. So it is better to remove coupler first.
Dear mr. Kosar Khan, aap mixchar ke upari bartan, jis me aap masala dalte ho, uske undar ek ghoomne wali dhar wali ,+ ya - jaisi blade = churi hogi wo agar shaft par Nut dheela ho kar nikul gayi ho, ya neeche ka motor ko jodne wala coupler-->plastic pankha garam honese pighal kar dandi ko nahi chalata ; aise kar nose-- motor blade ko ghuma nahi pa rahi hongi. AAp gaur se dekhiye. --> power band karke bartan nikal kar .ungliyon se pakad kar blade ko janchiye . Blade ke upar ka nut ghadi ke kato ki disha me kas kar ghomakar dekhiye. Ye nut jarabhi dheela nahi hona chahie. Blade ki dhar ko sambhalkar, blade pakkad me pakad kar nut ghadi jaisa ghumaiye. Agar tight nahi ho raha ho, ghoomta hi rahe, to samazna threads = aate kharab honge. jo jo purje = parts kharab ho, apne pas nye taiyar rakhiye. jarrorat pe badl deejiyy. Blade ki dhar hamesh tej honi chahiye. Tel sirf khaneka daliye. Poora kaam sawdhani se keejiye. Ye sab suzav, samaz kar aap ke mixer ka bartan bahut jaldi aur baarik katega,Bijlee kum lagegi, aur mixer kayam tikega.
Use a sharp, & same size good quality screw driver as 3 screws holding the jar to the bottom. Very carefully, turn each screw counter clockwise ,--> make sure not to slip the screw driver blade from the screw slot. after removal of screws, keep them safe. Now you can remove / separate both the jar & the base.
You must use a screwdriver with bigger diameter handle & apply more force. Be very careful, press down hard before turning.Do not let the driver blade slip, & damage screw head. If then the screw doesn't turn, or the head gets damaged, it must be drilled using a 1/16" inch size drill bit to remove the damaged screw head,then if all other screws come out, remove the jar, remove old cut screw, & use new screws.
Thank you so much... this video really helped me to fix my grinder blade. It wasn't rotate .. and finally your video helped me
God bless you,you saved me money for a new blender in this pandemic
I just followed the instructions today. The mixers is running smooth. Thnx!
🙏
Watched the video yesterday and tried it today. It worked. Thank you so much. You save my time and money. I live in remote village. Nearest town is 5km away. Repair shop would have charged Rs50.
Sir you've explained and showcased it very well . Thanks for uploading it ,it was truly very useful.
Thank you very much dear. Method is simply and workable. It save money and also increase life of mixer.
I watched and tried......it is really working.....Thank you sir you have saved my time and money....thanks a lot...
Thank you . Ask any problem, difficulty, when handling / repairing any technical home /
workshop appliance, I shall guide you. Tell your friends, relations
about my channel & url of this video.Thanks
Thank you sir. After watching this video, I was able to fix my blender🙏
Okkoomkio of kkk
Thank you so much sir.... I just Repaired my mixer jar after watching your video.... In this lockdown days.... Very helpful video.
Your English is soo good Sir.thank you for the video.
Sir my grinder jar is not opening to do this trick/solution.
What should I do?🙁
if holding the central nut doesn't work....try holding the blades part with pliers!!
holding nut didn't work with my jug but holding the whole blades worked!!!
Thank you very much Sir, for this video with precise instructions. Very helpful. It helped me to fix one jammed up and another tight blender. Thank you again !!!
Thanks man you are a savior. Today I repaired the jar completely on my own. Thank you so much. 🤗
It's not rusted, but my blender is very tight. It's too tight to rotate, i cannot rotate freely. I cleaned the blade many times, put oil on it, but still it is tight. I don't know how to fix it anymore. Please suggest what to do.
Thanks Bro I followed Ur Instruction It works Superb Bro Thanks
Thanku for this vedio... i just did with my mixi and it runs smoothly...
Thanks for ur valuable information.
Really ur video saved my time & money.
God Bless U.
Honestly, this video has been a Godsend!! Grateful to you! Thanks a lot.
Thanks for sharing such usefull tip..god bless you
Thanks Dear, I just repair my mixer jar, after your video... great job👍
Very helpful video...it really worked and my mixer blades are moving perfectly now :)
😮 wow 😮
I just fixed mine. Thanks 🙏🏻 a lot for detailed video with clear instructions.
Could you tell me if grinder jar is stuck little bit only after wet grinding.. I mean blade not moving freely... Plzz
Sir which company jar you are using in video??
Helpful, well shooted and precisely explained DIY video
Brother is It OK the shaft shrinking Up and down after following instructions?
Like all the other comments ... This saved me some money ... Thanks for the video.
Thank you sir! You saved me $100
Sir my sumeet grinder is stuck to the machine as it is made with cheap plastic the 2 black bits from jar and the machine . How do I remove the jar ?
My smallest jar is not grinding anything, previously it was up working fine. What to be done? The white coupler and the blade rotates easily, but it does not come out. Please let me know what the problem is
In my mixie ,saft is not coming out from the bush.I have kept the set in kerosin for long time but still it doesn't come out.now what can I do.
When I try to turn blades with hand it's working properly. But when I used with grinder Blades not rotating....how to fix it.
Thank you bro god bless u 🙏i did it with d help of dis video.
Thank you very much...!
For Bachelor's it was not that easy to clean the jar all the time...
Especially if are with a lazy friend, so it has stuck. Now the problem was sloved...
Thanks
Thanks for watching my channel / video. Ask question about your appliances, I shall guide you.Tell your friends & relations also. Let us help all.
You are all very welcome.
Sir meri mixi cup me mechanic ne fix check nut lga die hai an open nahi ho the kya keru
Is there any liquid to loose this jam..?
Hi can you send me the link which you discussed in the video of washing the Jar after every use. My Chutney jar gets jammed frequently. I was able to fix the blade using your video. Thank you.
Can i do some jugaad and replace ordinary mixie blade with blade from Panasonic Mixie?
Very helpfull, thank you so much... You save my money 😁
Can I open blade of Koryo mixer grinder in the same way?
what kind of washers you use to replace washers on the jars is it nylon, fibre, or ceramic washers, but not metal? washer
Great sir... It helps me alot and save my money
Sir, i mistakenly open upper screw clockwise of the blade.. how to refix this plz tell sir
Hi in my mixer jar niche Ka Jo black hai wo jammed hai to Mene bahut try Kiya but ho hi nai Raha to mein kya kru
Very useful video. Thank you sir
Good job brother 💜️💜️
Panasnic blender er bled jam khaler dekhaben
Very good vvideo sir you tell everthing very well
Sir,I tried this and the coupler is not rotating n it's very hard to turn it clockwise.I have used w40 but nothing did the trick.pls help
Coupler is also stuck.. Not moving.. What to do?
Iam not able to remove the coupler despite my turning clockwise , iam frightened to use pliers ,any tip you can Give?
Rao
+tadepalli rao hello Mr Tadepalli there is no way you have to do the same thing as a showed in myvideo. you have to use force to remove that a coupler otherwise it will not come out, because it is been tightened by the motor force you to try to unscrew by using force using Player and and turning clockwise is the only way to take it out don't be afraid If It Breaks you replace it with a new one ok? let me know if you are happy thank you
Jar cover jam how to open
How to open
tadepalli rao Hi All, please follow his instructions and after unscrewing coupler and blade, you should hit twice with a hammer from the inner side and twice from the outer side. Repeat this process a bit harder and the large screw will come out finally.
@@mybestesthobbies4347 it helped me 😊😊 tq
Which oil sir
Thank you..its so helpfull..
Excellent video...
Your instruction worked for me ! Thanks from Alberta Canada
This is really helpful
Sir peeche ka coupler b nhi khul rhaa ..wo bhi jam ho rkha h
I followed all instructions but still it is jammed. I put coconut oil overnight and next day tried to remove it.
Spare parts available store and place
Very helpful video sir...
Thank you..
Thanks bro it is working supper now🙏🙏
Sir i am unable to open the bottom(first step) WAt can i do
Thanks for the tip Sir.
पुरानी गोपी मिक्सी में सोकेट कैसे लगाएं तथा बुश में साफ्ट फंस गई है ।केरोसिन में रखने के बाद भी साफ्ट नहीं निकल रही है।क्या कारों
Thank you for this video! I've had this problem and glad I looked up the net and found you to help. Trying this tomorrow :)
Thank you . Ask any problem, difficulty, when handling / repairing any technical home /
workshop appliance, I shall guide you. Tell your friends, relations
about my channel & url of this video.Thanks
in case of any difficulty, you are welcome
Who is watching it this corona virus lockdown 👍
Me
Very nice video
The behind part of the mixer is stuck n not moving tried oiling it but still not able to remove. But the blade is removed.
Keep a round tube more then bush size, around the bush and supporting that tube on a hard surface hammer the shaft out of the bush if it doesn't come press or hammer the whole bush out of mixer base. Replace new bush and shaft assembly, lubricate using edible oil only
in case of any doubt see my video
th-cam.com/video/aZ_v4QqRknI/w-d-xo.html
Please see other replies. Force open,do what ever needed. It must be removed,& new parts replced.
Well explained. God bless you.
Very Helpfull thank you so much
Very helpful video, thanks😃😃
Great video thanks sir
Excellent, thank you
sir mere grinder ki andar ke cutter ki slip ho gi h
mixer jar ka blead khul gya hai upar se kya o fir se keise thik hoga nhi ksa rha hai
Aagr nut /shaft ke aate=threads ghis gaye hai, to naye parts daliye. Poora grinder ka baryan mixer ki d ookan me sample dikhakar naye parts taiyyar rakhna. Aapka kaam poora hojane ke liye parts taiyyar hona bahut jaroori hai. Uprwale nut ko taait karne ke liye us size ka spanner / pakkad hona jaroori hai. Nut poora kas kar tait karna. Loose raha gaya to chalte chalte loose ho sakta hai. Bush aur shaft ke under
sirf khaane ka tel hi daaliye .
Machine oil mat daaliye, sehat ke liye bura hai. Aapko bahut shubhecchayen.
Thanks for sharing your knowledge
Sir the cutters aren't coming out
They just keep rotating
Thank you for this video
How to fix loose blade?
Thanks a lot. Helpful video.
Mera niche wala v nhi khul rha h how to open it..???
Thanks for sharing. However, I had to turn counterclockwise - usual for opening/unscrewing!!
Threads in mixer, grinders are made other way , to keep them tight as the motor rotates. So, for unscrewing, it must be turned clockwise. Please try this, you will find. If turned anti clock wise ,it will get tightened &wont come out.
@@mybestesthobbies4347 To unscrew you turn clockwise the blades with your right hand , but from the other side, the base (we have a screw nail) we turn the nail counterclockwise with the right hand to unscrew ... isn't it??
Very helpful, thank u
Excellent. Thx.
sir what if i open blades then i remove this tube from coupler side ?
you can do that also if possible, from whichever side shaft can come out; remove it.
You can open it any way. But if you open it from blade side, you must tighten the nut fully,using a spaner. If it remains loose, it may come off from the shaft. So it is better to remove coupler first.
amazing thanks a lot
Thank you!
Tq for the usefull tips...
sir hmari mixchar me jb ham koi bhi msala ya adrak lahsun dalte hai to vo kyu nhi chalri aur masala nhi dalre to chal ri hai plzzz riplay jarur de
ab uski hilaneki takat nahi Rahi 😂😂😂😂
Dear mr. Kosar Khan, aap mixchar ke upari bartan, jis me aap masala dalte ho, uske undar ek ghoomne wali dhar wali ,+ ya - jaisi blade = churi hogi wo agar shaft par Nut dheela ho kar nikul gayi ho, ya neeche ka motor ko jodne wala coupler-->plastic pankha garam honese pighal kar dandi ko nahi chalata ; aise kar nose-- motor blade ko ghuma nahi pa rahi hongi. AAp gaur se dekhiye. --> power band karke bartan nikal kar .ungliyon se pakad kar blade ko
janchiye . Blade ke upar ka nut ghadi ke kato ki disha me kas kar ghomakar dekhiye. Ye nut jarabhi dheela nahi hona chahie. Blade ki dhar ko sambhalkar, blade pakkad me pakad kar nut ghadi jaisa ghumaiye. Agar tight nahi ho raha ho, ghoomta hi rahe, to samazna threads = aate kharab honge. jo jo purje = parts kharab ho, apne pas nye taiyar rakhiye. jarrorat pe badl deejiyy. Blade ki dhar hamesh tej honi chahiye. Tel sirf khaneka daliye. Poora kaam sawdhani se keejiye. Ye sab suzav, samaz kar aap ke mixer ka bartan bahut jaldi aur baarik katega,Bijlee kum lagegi, aur mixer kayam tikega.
Uski takat bahut hai ' Khandani takatwar hai. Aap samazkar adab se uski dekh bhal keejiye. Aapki bhut sewa karega.
nice video. ..it helped me alot
Great Idea Sir. Thanks
Thanks for your video
thanks sir. ,am trouble this problem many times
Very nice
Very gud
Thank you so much
Thankxx
Awesome!!! thanks for your help
How to remove struked mixer jar screws and how remove jar back part
Remove 3 screws carefully, without damage. Top jar/container & the base will be separated.
Use a sharp, & same size good quality screw driver as 3 screws holding the jar to the bottom. Very carefully, turn each screw counter clockwise ,--> make sure not to slip the screw driver blade from the screw slot. after removal of screws, keep them safe. Now you can remove / separate both the jar & the base.
You must use a screwdriver with bigger diameter handle & apply more force. Be very careful, press down hard before turning.Do not let the driver blade slip, & damage screw head. If then the screw doesn't turn, or the head gets damaged, it must be drilled using a 1/16" inch size drill bit to remove the damaged screw head,then if all other screws come out, remove the jar, remove old cut screw, & use new screws.