At 05:18 in the video you can see that the copper coil is being sprayed with a cold gas medium. Note the spill on the table. Totally fake. You need a high pressure compressor, a condenser, drier, expansion valve or capillary tube and a evaporator.
You could had just sprayed compressed air or freon on it to ice it.😮 Learn how to make freon, liquid nitrogen or liquid helium ffor a cryo freeze or ac unit! On your induction heater as a all in 1 unit!❤
You inject weldman its use for welding or joint two objects instead of free freeon gas how it works without that. The weldman is getting cool if it's compressed in circulation
Also, what are you using as the thermal expansion valve? Is it that orifice you plug the rubber hose into? Or because the small coil is lower it is acting as a collector and just evaporating off?. This makes sense as the pump appears to be low pressure just to move fluid that collects. I wonder if it would benefit from an orifice as it may suffer a performance issue as is if tipped.
Tip: it works on the princepals of a steam engine pump. The fan blows the cold air off the tubing cooling it to operate the pumping action. Freezing the can or chilling it like a blast freezer!😮😮😮😮❤
At 05:18 in the video you can see that the copper coil is being sprayed with a cold gas medium. Note the spill on the table. Totally fake. You need a high pressure compressor, a condenser, drier, expansion valve or capillary tube and a evaporator.
Wrap soda can in wet paper towel and put in freezer. Ice cold in 15 minutes and you don't have to build anything.
You could had just sprayed compressed air or freon on it to ice it.😮
Learn how to make freon, liquid nitrogen or liquid helium ffor a cryo freeze or ac unit!
On your induction heater as a all in 1 unit!❤
Now days trending this one
How long does it last and doesn't burn?, Please answer
OK, very good❤ واقعا عادی ب.
واقعا عالی
It's fake! Where the fan getting airflow 😂?
هذه تسمى خدعة وضع الخردة في الفريزر قبل التصوير بدقائق 😂😂😂😂
لكن الاختراع ناجح يا اخي ومجرب
Nice
How can i fine motor freezer ?
You inject weldman its use for welding or joint two objects instead of free freeon gas how it works without that. The weldman is getting cool if it's compressed in circulation
its fake!!! new trand of bullshit
Deberías vender eso mini creación,te volverías millonario.
نصيحه
اذا صغرت من حجم الخرطوم الموصل بين لولب التبريد ولولب التسخين سوف يبرد بي سرعه فائقه
السلام عليكم
انت جربتها ؟ ولا الفيديو كذب؟
The dynamo used does not have any type of pressure
بسیار عالی و تشکر از ویدئو خوب آموزشی شما استاد گرامی.......آن اسپری دقیقآ چی بود متشکرم 🎉🎉🎉
Don't waste your resources people!
How did you fix that point where you injected the gas
Super glue
Okay, than you@@creativethinkideas
😂😂😂😂
This is fake. evaporator neednot fan but condenser need fan .in this circuit must be capillary tube.and a weak pump can not pressure as compressor.
Have you tried it yourself?
ما تفعله ليس في صالحنا، بل لزيادة سمعتك
I will ask one of the specialists in this field whether this experience is correct and I will tell you about it 5:57
What is the motor you are using as the compressor?
Also, what are you using as the thermal expansion valve? Is it that orifice you plug the rubber hose into? Or because the small coil is lower it is acting as a collector and just evaporating off?. This makes sense as the pump appears to be low pressure just to move fluid that collects. I wonder if it would benefit from an orifice as it may suffer a performance issue as is if tipped.
First view...😅
There is zero air compresed.
Boru çapı nedir? Denemek istiyorum.
It's fake!
Tip: it works on the princepals of a steam engine pump.
The fan blows the cold air off the tubing cooling it to operate the pumping action. Freezing the can or chilling it like a blast freezer!😮😮😮😮❤
There is a scratch of some kind
hahaha
What is the theory behind this?
The refrigeration cycle
What you are doing is not for our benefit, but rather to increase our reputation
Hi
fake 5:17?
No
This guy never responds he's only in it for the clicks.
no me jodas..... ¡ES HERMOSO!
4:30 ¿que es eso que le inyectas?
It is a type of gas used to refill lighters
Lol. This is clearly not real. Good job making fake videos just to get views.
big lie
FAKE !!!!!
Fake. absolutely fake 😂🤣
Legal 👍
Fake
Fake😂
Faltu
You ruin the channel when you put such fake nonsense on it.
Fake
Fake