Hi Lior, I placed the motor as a subassembly, speed of the motor is controlled by a drive constraint. The power however isn't possible to control in the assembly environment. You can only do that in Dynamic Simulation within Autodesk Inventor.
Great Job, You are the best modeler I've seen on you tube, if I want to make my own gearbox to follow along with this tutorial does the bearing journals need to be a certain distance or will the spur gear design calculate the distance?
Hi Aaron, I'm fine thanx :D. My laptop has 16 gb of ram and it has an i7 processor & an NVIDEA Quadro 3000. I noticed your graphics card isn't Autodesk certified, check your inbox to see where to check that. If you use certified graphics hardware and correct drivers, will improve performance a lot, keep in mind that this video is speeded up about 30% to reduce time. Further, make sure you create your own (small) content center library. Hope this helps, performance problems can be complex
Gut gemacht, aber der Durchmesser der Achse der Spannrolle am Langloch sollte größer sein, da sonst die Last in radialer Richtung m.E. zu groß wird (Lochleibungsdruck). Trotz Schrägverzahnung sollten noch Distanzbuchsen auf den Wellen neben den Zahnrädern sein. Die mit dem Schraubengenerator erstellten Schrauben am Gehäuse sehen so aus, als ob die Scheiben nicht aufdem Flansch aufliegen.
Hello how are you? what are the characteristics of your cpu and gpu? runs extremely fluid, I have 8gb of ram to 1333mhz, AMD Athlon II x4 640 and Geforce GTX GPU = 2 Sc 660 - SLI and did not run as smooth as you would appreciate your response and help. PS: Sorry for my English but not yet mastered both. Greetings from Venezuela
as it does to make moves together, we need to do calculations or have to connect everything in Inventor? is in assembly that connects or is in animation?
i am using Autodesk Inventor 2014, i want use bearing generator but when i click update there are nothing bearing choise, is there component that must be installed to use bearing generator tools ?
Im looking for someone who can help me with a design in autodesk. Ive got the basic plans on paper but need someone to create a working 3D model for me. Any help will be appreciated
Hey man...so I have a project that i want to run by you...i will pay you up to $150 to create it.... I have the sketches and measurements. It shouldnt take you long.... Anyway...let me know if you are interested! This is no joke by the way...I really want to get this project off the ground and could use the help.
This is absolutely awesome. In 13 minutes I've learnt more than in few weeks of blindly trying to do this myself.
Please do more!
Great work, man. I'm studying mechanical engineering, and this video is one of best invertor videos on TH-cam, trust me. All congratulations!
Hi Lior, I placed the motor as a subassembly, speed of the motor is controlled by a drive constraint. The power however isn't possible to control in the assembly environment. You can only do that in Dynamic Simulation within Autodesk Inventor.
Now I must do gearbox to school and I do video (tutorial) too.. :) Nice tutorial :-)
haha, good luck with it
Very nice ! Thank you for sharing !
thank you!!
Great.... Cooolll.... very very nice work
You are a teacher!!!
Great but quick tutorial!
thanks
Great Job, You are the best modeler I've seen on you tube, if I want to make my own gearbox to follow along with this tutorial does the bearing journals need to be a certain distance or will the spur gear design calculate the distance?
Nice Job!
Very nice job.
Hi Aaron, I'm fine thanx :D. My laptop has 16 gb of ram and it has an i7 processor & an NVIDEA Quadro 3000. I noticed your graphics card isn't Autodesk certified, check your inbox to see where to check that. If you use certified graphics hardware and correct drivers, will improve performance a lot, keep in mind that this video is speeded up about 30% to reduce time. Further, make sure you create your own (small) content center library. Hope this helps, performance problems can be complex
Gut gemacht, aber der Durchmesser der Achse der Spannrolle am Langloch sollte größer sein, da sonst die Last in radialer Richtung m.E. zu groß wird (Lochleibungsdruck). Trotz Schrägverzahnung sollten noch Distanzbuchsen auf den Wellen neben den Zahnrädern sein. Die mit dem Schraubengenerator erstellten Schrauben am Gehäuse sehen so aus, als ob die Scheiben nicht aufdem Flansch aufliegen.
You are a CAD master
Very good
Ohh man my gratulation, realy great skills what you have
wow man great job, are you making tutorial videos?
great toolkit
very very good..
Dear,
Good evening.
Is it possible to send me the complete set with all the parts?
Using packaging.
Thank you.
esta genial gracias por compartir
Thank you!
superb!!!
thanks!
Good work. How did you create name plate on the motor?
That's perfect
Muito bom!
Thanx!!
awsome!
thanks ..
the bearings not moving
& how you do the motion without inventor studio ?
Hello how are you? what are the characteristics of your cpu and gpu? runs extremely fluid, I have 8gb of ram to 1333mhz, AMD Athlon II x4 640 and Geforce GTX GPU = 2 Sc 660 - SLI and did not run as smooth as you would appreciate your response and help.
PS: Sorry for my English but not yet mastered both. Greetings from Venezuela
as it does to make moves together, we need to do calculations or have to connect everything in Inventor? is in assembly that connects or is in animation?
can i get motor or must create it!?
verry nice. can I have the Inventor parts for my students?
did you make all the parts?? how to make the motor?? the blue one
why the building environment is so beautiful ??? i thought it is only that beautiful when we render. can anyone teach me ??
is it trustfull? the design calculator results...?
How do you get that key to drive the puley? my key is spinning but not the pulley???
It should drive the pully by default, I can take a look at it if you want. Send me your mail adres and I'll reply to you
Thank you for the video but where I can find the files please ?
how do i import items i can use in my project such as your motor ?
and set them on my rms and power
i am using Autodesk Inventor 2014, i want use bearing generator but when i click update there are nothing bearing choise, is there component that must be installed to use bearing generator tools ?
thank you!
could you please send me a downloadable link for my practice
How did you set up the background to be white?
WoW
where do you bring the motor??
great ˆˆ
Is there any way to do this in Catia V5?
what pc specs do you use ?
is de design tabb included in student version ??
CAN YOU DO THAT IN SOLIDWORKS???
Do you first draw the box?
how do you made the enviroment?
u have drawing or .ipt file?
WOW
hi,can you help me to do the gear box form the begging for my study
may can you help me to do the gear box
Hello, i am a teacher,
Can i have the complete project off this project?
Where do you live?
The environments are default
Hi there, just google for free 3D cad models, you will find a lot of them. 3dcontentcentral is a good one
it's seminal!
why without voice, it's not that clear to see the menus and command
Could you please send me thecharacteristics of you cpu too?
They told us it is not very useful to put the 2 keys 180 degrees from one another
Nice try, but it's not much good without at least simple commentary and is rushed and hard to follow anyway.
me pueden enviar el plano por favor para hacerlo
Im looking for someone who can help me with a design in autodesk. Ive got the basic plans on paper but need someone to create a working 3D model for me. Any help will be appreciated
goody
nothing special there, just add some shadows
Hey man...so I have a project that i want to run by you...i will pay you up to $150 to create it.... I have the sketches and measurements. It shouldnt take you long.... Anyway...let me know if you are interested! This is no joke by the way...I really want to get this project off the ground and could use the help.
sorry man, don't do voice overs :D
gosu
check your inbox
I can help, pm me
No audio :( no instructions... this isn't what I call a tutorial
It isnt a tutorial to begin with gtfo
Thanx!!
CAN YOU DO THAT IN SOLIDWORKS???
how did you do the motor?
could you please send me a downloadable link for my practice
Thnx!!