Nissa sentra Carburator Cleaning and replacement of Floater

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ธ.ค. 2024

ความคิดเห็น • 49

  • @samartchaisanoi3477
    @samartchaisanoi3477 ปีที่แล้ว

    From Thailand 👍

  • @renalynrayah9660
    @renalynrayah9660 ปีที่แล้ว +1

    Sir saan banda u check ball planger nklagay

  • @fujiobass
    @fujiobass ปีที่แล้ว

    Thank you !

  • @Toyztoyztoy
    @Toyztoyztoy 11 หลายเดือนก่อน

    Where does the shine metal ball go?

  • @fray2j
    @fray2j 11 หลายเดือนก่อน +1

    Hello friend, i have same carburetor in my Nissan Sunny, the engine would stall and did not spray enough fuel so I opened the carburetor to clean dirt and unclog fuel passages, I assembled the carburetor but now it doesn't spray any fuel, any suggestions of what to do? Thank you

    • @fourjvlog1374
      @fourjvlog1374  11 หลายเดือนก่อน +1

      try to check the supply of fuel from mechanical fuel pump to carburator

    • @fray2j
      @fray2j 11 หลายเดือนก่อน

      @@fourjvlog1374 it is working, and when I cleaned the carburetor I emptied the reservoir inside it, and now I can see new fuel inside it through that little glass window so there is fuel inside, but it doesn't spray it

  • @ricardoancheta2591
    @ricardoancheta2591 2 ปีที่แล้ว

    gud blessed day, tga saan po Kyo bka puedi kyo n rin ang gumawa sa carburetor ng Nissan lec b13, thank s and God bless!

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      Brgy. Dalakit Catarman Northern samar po. Sir.

  • @michaelcasiple7492
    @michaelcasiple7492 ปีที่แล้ว

    Sir yong sakin po bagong general overhaul then oveehaul din caburador.binaba yong fuel tank binutasan linis loob.ang problema po sir first gear ang takbo po ay purot purot

    • @fourjvlog1374
      @fourjvlog1374  ปีที่แล้ว

      kmsta po sir sasakyan nyo ngayon lang ako nakareply.

  • @lloydcorpuz8894
    @lloydcorpuz8894 11 หลายเดือนก่อน

    Sir hindi nio po ba nilalagyan ng beta gray sa gasket na makapal?

  • @nickpandemic538
    @nickpandemic538 ปีที่แล้ว

    Taga san ka sir

  • @JovitaPosadas-lx9em
    @JovitaPosadas-lx9em 9 หลายเดือนก่อน

    ayaw po magmenor at namatay pag bitawan silenyador

  • @ortegalawrence45
    @ortegalawrence45 2 ปีที่แล้ว +1

    Sir ano code ng repair kit ginamit mo wala mabili dto samen eh

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      GA13 nissan sentra bro..

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      tignan mo ang certificate of registration makikita mo sa engine number kung GA13,B14, B13, ba ang model nga nissan sentra mo or kahit anong sasakyan.

  • @jaycelsobito3931
    @jaycelsobito3931 2 ปีที่แล้ว

    Ayos ahh 👏

  • @crazygamesyt7777
    @crazygamesyt7777 2 ปีที่แล้ว

    Nice bro

  • @charmagneamora7624
    @charmagneamora7624 2 ปีที่แล้ว

    Bos tanong lang diba may bolitas yan at spring na mallit saan makikita

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      Opo meron po. Hindi maipaliwanag, demo ang kailangan, kung saan direct talaga ang location. Soon gawan ko ng content.

  • @haideesantilla1702
    @haideesantilla1702 ปีที่แล้ว

    Boss matipid po ba ang nissan carburator type kaya po tumakbo nang 13 kilomtrs per 1 litro

    • @fourjvlog1374
      @fourjvlog1374  ปีที่แล้ว +1

      12 to 13 kilometers per 1 liter, pero nakadepindi pa rin po sa load yan.

  • @alkezarlomoljo890
    @alkezarlomoljo890 2 ปีที่แล้ว

    boss may washer po ba ung power jet at dapat tanso xa?

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      good evening boss, sa nissan sentra 1999 model walang washer, may sasakyan din na meron walang kaso kung tanso or anong klasing metal, ang mportante sa washer kung papalitan mo same pa rin ang kapal for example kung ilang melemeter ang kapal..thank you boss

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      pasubscribe na rin po boss malaking bagay po sa akin..maraming salamat.

  • @JovitaPosadas-lx9em
    @JovitaPosadas-lx9em 9 หลายเดือนก่อน

    one click nman po sya,kailangan lang apakan silenyador ng 1/4

    • @fourjvlog1374
      @fourjvlog1374  9 หลายเดือนก่อน

      palitan mo ng magnetic solenoid doon sa carburator.

  • @JovitaPosadas-lx9em
    @JovitaPosadas-lx9em 9 หลายเดือนก่อน

    good day po sir,hingi po sana ako payo ka modelo po ng kotse nyo sir ,umaandar nman sir,kaya lang po ayaw mag menor namamatay sir pag binitawan silenyador at palyado.

  • @bryanjaycinches2524
    @bryanjaycinches2524 2 ปีที่แล้ว

    Mgsend sana ako ng pic

  • @marcowenhuertas7955
    @marcowenhuertas7955 2 ปีที่แล้ว

    Boss pa help naman ako naghahanap din ako ng floater pang B13, sana masagot boss

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      makakahanap ka bossing sa mga nagbebenta na second hand parts.. doon lang din ako nakahanap..

  • @JovitaPosadas-lx9em
    @JovitaPosadas-lx9em 9 หลายเดือนก่อน

    pwede po call sir?kung pwede

  • @regornoznem1647
    @regornoznem1647 2 ปีที่แล้ว

    Good pm. boss pa tulong naman. Nilinis ko lang carb ng nissan b12 ko.nong pina andar ko na sa 5 minutes kong pag pa andar obos ung 2 liters ng gass k0, pano nangyri boss,, sana matulongan mo naman ako,, salamat sa sagot.

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      palitan mo ng repair kit bossing

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      proper tuning sa carburator after malinisan.

  • @crazygamesyt7777
    @crazygamesyt7777 2 ปีที่แล้ว

    👍👍😎😎👍👍

  • @princedelossantos9285
    @princedelossantos9285 2 ปีที่แล้ว

    ♥️❤️😍💪💪♥️🇵🇭

  • @bryanjaycinches2524
    @bryanjaycinches2524 2 ปีที่แล้ว

    Boss may fb ka ba my tatanong lng sana ako

  • @roiengalero3269
    @roiengalero3269 2 ปีที่แล้ว

    Maupay..

  • @Taylor-jq6rl
    @Taylor-jq6rl 2 ปีที่แล้ว

    pagawa nyo nalang sa carb specialist ang carb parang injector yan may specialist na nag cacalibrate nag totono maselan yan

    • @fourjvlog1374
      @fourjvlog1374  2 ปีที่แล้ว

      yes mas maganda po sa specialist , pero pag gusto matuto walang maselan at walang mawawala, madaling gawin, need lang magbasa sa mga libro,magtanong parang laging standard ang gawa, sa tuning 750 RPM tapos kung saan ma reach ang pinakamalakas na vacum