Is there a reset to default on this? I think I may have adjusted other parameters by not knowing what I'm doing. If not, I think P01 would be the most likely to have been adjusted, could you provide the setting for that please?
Hi do you know what causes A41 and how to fix it. I have it servived and they go in the boiler and all time I have problems when they done the service. I brought the flow sensor which seems to be a magnetic switch. however looked in the boiler the connection looks good. its a optimax he31c is parameters same for that boiler?
F41 is poor circulation..first check the sensor on the left hand side of heatexchanger it's black and white it could be loose and not sitting on the pipe correctly.
@@theferroliman2067 do you have a part code and can i get to this by just removing the white cover? I checked the bottom sensor on the flow switch and a blue wire came out of that i have taped it back in to the connector but it still trips so im thinking its this sensor your talking about. Oh by the way its A41 not F41
You won't find one ...only the ferroli engineers have them .As homeowners have a tendency to fiddle around .Hence why I've shown the key parameters thats really any use anyone to actually change ...
You may need an engineer to repair this ...it could be anything . Sensors ,fan parts , stuck flowmeter if u have heating then u need to see if the tap light illuminates when the tap is turned on that'll answer a few questions if it does or doesn't
hi. I need to put the boiler in stand-by mode (as requested in the manual to change between natural gas to LPG) but I don't know how to do that. can you help me? thanks
You'll need to tell me what boiler u have as there's different ways of setting up the LPG in the parameters. Plus some need injectors replacing aswell .
@@ryanhall4083 if you bought you water heater as a natural gas type then u need someone gas safe registered to convert it as the injectors aren't LPG.And set up the circuit board for LPG aswell .
Doesn’t work on the HE 31c! P6 & P12 you can’t set up the % for number of radiators and P12 you can’t adjust the temperature of the hot water. I have HW but no CH and thought I would try and tell it how many radiators (2) it works to. As I found out, this doesn’t work!
This video isn't for that boiler...it's for other models domicondens, he 26c , íboiler, eurotherm If you listen from the start it tells you what boiler model it's for
@@zakariazizou1639 F05 will depend on which boiler model u have ... Pcb , fan , air pressure switch, clean fan or adjust fan Venturi ..are the possible problems
I have come to you on several occasions and you have always given me the answer, thanks
6:23 the fuse on the wall next to the boiler stopped working. We replaced it with a new fuse but our boiler won’t light up. It’s a farolli boiler.
Hi there, do you have the parameters list for a HE Plus 31C. I know they are factory set but it would be good to check the parameters . Many thanks
Is there a reset to default on this? I think I may have adjusted other parameters by not knowing what I'm doing. If not, I think P01 would be the most likely to have been adjusted, could you provide the setting for that please?
Did you figure out a way? I ve made the same mistake and now mine will go to 3 bar when turning on hot water and the heat will be on nonstop
Hi do you know what causes A41 and how to fix it. I have it servived and they go in the boiler and all time I have problems when they done the service. I brought the flow sensor which seems to be a magnetic switch. however looked in the boiler the connection looks good. its a optimax he31c is parameters same for that boiler?
F41 is poor circulation..first check the sensor on the left hand side of heatexchanger it's black and white it could be loose and not sitting on the pipe correctly.
@@theferroliman2067 do you have a part code and can i get to this by just removing the white cover? I checked the bottom sensor on the flow switch and a blue wire came out of that i have taped it back in to the connector but it still trips so im thinking its this sensor your talking about. Oh by the way its A41 not F41
Is there a document where all menus and options are described? Haven't been able to find one at their home page!
You won't find one ...only the ferroli engineers have them .As homeowners have a tendency to fiddle around .Hence why I've shown the key parameters thats really any use anyone to actually change ...
Great help bro,,thank you
Heating is working fine
اليجزيك بالخير شكرا نوريد مزيد الشرح
How to resolve A01 error. Other gas appliances are working fine.
Hi is it the same set up for ferroli optimax he plus 38c .please
شكرا جزيلا لك أستاذ
من فضلك كيف يتم معالجة المشكل f07
👍(A03 - Feroli BLUEHELIX PRO 25C)
Hi I have ferolli f24 Combi , we have no hot water coming from the boiler please help
You may need an engineer to repair this ...it could be anything . Sensors ,fan parts , stuck flowmeter if u have heating then u need to see if the tap light illuminates when the tap is turned on that'll answer a few questions if it does or doesn't
@@theferroliman2067 thanks
Please how to resolve F05 problem thank's
This fault needs an engineer visit ...it could be expensive guessing as it could be at least 4 different parts or adjustments
@@theferroliman2067 thank you for your help please which part can be changed
@@bellifanazim5857 it could be a circuit board, fan ,air pressure switch (if it has one) , a fan Venturi adjustment .
When I select parameter 6 I can only choose between one and three can you help.
hi. I need to put the boiler in stand-by mode (as requested in the manual to change between natural gas to LPG) but I don't know how to do that. can you help me? thanks
You'll need to tell me what boiler u have as there's different ways of setting up the LPG in the parameters. Plus some need injectors replacing aswell .
Same question mine is a sky eco 11l
@@ryanhall4083 if you bought you water heater as a natural gas type then u need someone gas safe registered to convert it as the injectors aren't LPG.And set up the circuit board for LPG aswell .
@@theferroliman2067 Thank you, I guess that will cost a fortune! Thanks for the help
@@theferroliman2067 I just double checked, this was the description Ferroli 11L LPG Room Sealed Water Heater & Flue Replace Morco F11
Please help me Unother problème a 15 chaudières ferroli diva
More information is in the description if you press the arrow/triangle button rhs
Dave Allum boilers
Hi
I have a ferroli f24
It's showing A01 fault
Do you know what to do?
when i select parameter 6 on mynodena 27c he i do not get a percentage of up to 100% i can only select between 1 and 7
This one doesn't cover the MODENA he ... You shouldn't need to adjust the output on a MODENA . Bit if you do, it's parameter 13 .
When I select parameter 6 I can only choose between one and three.
This is a demicondes f28 can you help .
Cheers.
F7 érror f7 érror
Bravo do you give me paramaitre ferrolli 😰😰😰😰
Hi how do I raise the temperature on my boiler too more than 50??
Error a3 ferroli?
my boiler display - - what to do ?
hi , i want all default parametrii on nr 1..to16 please
Nice
Doesn’t work on the HE 31c! P6 & P12 you can’t set up the % for number of radiators and P12 you can’t adjust the temperature of the hot water. I have HW but no CH and thought I would try and tell it how many radiators (2) it works to. As I found out, this doesn’t work!
This video isn't for that boiler...it's for other models domicondens, he 26c , íboiler, eurotherm
If you listen from the start it tells you what boiler model it's for
@@theferroliman2067 can you share which are the parameters for range rating the power on the HE PLUS 31c?
Have error f05.
Domicondens f28
Stp problème f 05 ferroli diva
This fault is normally a circuit board fault
@@theferroliman2067 It turns on and off, but most of the time is off
When placing the cover, it stops forever
@@zakariazizou1639 F05 will depend on which boiler model u have ... Pcb , fan , air pressure switch, clean fan or adjust fan Venturi ..are the possible problems
@@theferroliman2067 thanks very match gys ❤❤
Paramètres ferroli diva c32