Sir Driving gear(small-12 teeth) aur driven gear( big-24 teeth) ke bichme backlash rakhna he to hame konsa gear ki module ki hisab se rakhna he. Sir plz example Sath bataiye.
Sir can u explained , how u have arrived at the formula for calculating the backlash = 0.6 * teeth module . Will it be applicable for the newly machined gears only ?
Need a question on the backless. If drive and driven gear have different module so how we calculate accepted backless between both gear teeth. Pls suggest.
Very nice n very useful video. Thanks
Most welcome brother
Please like and subscribe there are number of such type of videos in this channel
Very Basic, It can be very deep
great ..👏👏👏
Thankyou
Very nice video ye koi mahi batata h best video
Very Informative..
Thankyou
So nice sir...
Thanks for making such type of informative video for those,who r not mech engineer& he is working in Cement Industry.
Most welcome brother please like and subscribe.
Very nice good discussion your talking is very good
good describe
Thanks proud of you and continue to new technically video's
Thanx for your love and support brother stay connected please subscribe and press bell icon There are number of such type of videos in this channel
Too good video sir
Thanx for watching
Very useful Post sir....
Thanx for watching please subscribe there are number of such type of videos in this channel.
Thanks nice information
Very nice.
Thankyou
As I'm working in steel industry, so this information is much more useful ..good job sir.
Plz Subscribe brother there is a lots of videos in my channel
Playlist Industrial and technical
Aapki company me koi vecansy hai kya
Plz sand your number
Thank sir ji
Most welcome
Awesome vedio...👌👌👍
Thankyou so much please like and subscribe ❤️
Very helpful v in my working place.
Thanx for watching please subscribe there are number of such type of videos in this channel.
Stay connected press bell icon for notifications
Again thank you so much for valuable information.
Most welcome
Thank You Best Information. .
Thankyou so much please like and subscribe ❤️😊
Informative bhai
Thanx for watching
Your videos are really beneficial.. continue the same affort really appreciate it
Thanx for watching please subscribe there are number of such type of videos in this channel stay connected.
Very helpful vedio clip sir 😍😍
Thankyou Shankar ji
Good information
Thanx for watching please subscribe brother
Good explanation
Thankyou so much
Super Explanation
Thanx for watching please subscribe if really you like it
Thanks bro good work
Most welcome brother
Sir can we measured module physically on gears, can you show it in this drawing
Sure you can measure it
Thanks so much
bahot badhiya 👍
Dhanyvaad
Very helpful
Please like & subscribe
Bahut jada use full h dear
Thanx dear
Thanks ❤
Welcome brother
Thanks🙏
Most welcome
Sare dought clear ho gya sir thank you sir
Thanx for watching please subscribe
Very useful for me...
Thanx for watching please subscribe there are number of videos like this in my channel
@@superfaststudyexperiment I already subscribed
1:57 Module: Pitch circle diameter in mm / Number of teeth
Thanks bro 👍✌️✌️
Most welcome
Subscribe kar dia hay sir
Thankyou ❤️ 😊
It is very helpful me
Thanx for watching brother
Bhaut badiya sir
Thanx for watching please subscribe
AGAR KISI GEARBOC KI Cd ka pta ratio ka pta h to no of teeth kaise nikaale
Thanku and very gud
Most welcome please like & subscribe.
oo. thank you very much
Most welcome 🤗 please like and subscribe.
Thank Sir ji......
Sir
If we have to develop 16 teeth gear an 49 teeth reduction gearbox how to calculate
nice
thak you for this valuable information.
Please subscribe my channel there are number of videos like this
Sir 0.06 and 4.5 why multiple kartehne
Is this is also aply in helical gear
Very gud bhai
Thankyou bhai
Good info
Thanx for watching please subscribe.
Thank you...brother
Most welcome brother 😊 ❤️
Nice information...
What is the minimum allowable root clearance and backlash.
Is it same For Worm gears and spiral gear
You are genious
Thankyou so much 😊❤️
Takeup pulley alignment of gear box and drum pulley par video banaiye
Bilkul banane ki kosis karunga Mitra
👍👍👍👌👌👌😊
Thankyou
Good
Thanks
Can we use this formula for all types of gears?
Thank you ❤
You're welcome 😊 please like and subscribe
nyc
Thankyou so much
👍👍👍
Good, how to compensate root clearance either by changing centre distance or changing root diameters?
Great
Thanx for watching please subscribe
thank you sir ...hum aapka video dakka clooer ka girth gear alignment kiya
it's proud movement for me that my viewers do Great and Big jobs in their respective field. Great job brother
Kitne Tpd ka cooler hai
@@superfaststudyexperiment 100 tpd
hum aapka video daily dakta hai
Super
Thankyou so much
Thq ji sir
Most welcome please like and subscribe.
Thanks❤❤❤ 🙏🙏
Most welcome brother please subscribe there are number of such type of videos in this channel
4:40 Backlash: 0.06 X Module
4.5, 0.06 ISO STANDARDS he ?
It can apply for all gear ?
very clearly and briefly explained , But some small spelling mistakes in the text
Jaldbaji me speling mistake ho gaya hai apne sahi kaha
Hello clearance nikalne me pinion and gear me se kiska module use karenge
Sir Driving gear(small-12 teeth) aur driven gear( big-24 teeth) ke bichme backlash rakhna he to hame konsa gear ki module ki hisab se rakhna he. Sir plz example Sath bataiye.
Dono hi gear agar mesh me hai to unka module same hi hoga mere dost
Mast he bhai
Best he brother well done full support
Backlash k स्पेलिंग गलत हो गया है मित्र हड़बड़ी में
@@superfaststudyexperiment hm dekha maine hadbadi main avi kabi ho jata he usko sudhar na badi bat hoti he
Sir can u plz suggest the solution
We are facing gear tooth failure in spur gear and last within a month we have replaced total 3nos gears
👌
How do we adjust Backlash by highlighting three teeth on the driven gear?
5:07 Root clearance: 4.5 X Backlash
Can't understand the module calculation because how backless is calculated with 50mm little confused
How many methods of taking backlash?
❤❤❤
Thx
Most welcome please subscribe
Sir pitch circule teeth ke top se yani gear ke outer dia se q nahi lete
Sir endfloat kia hota hy
Nice
Most welcome
Thank you sir
Most welcome
What's the 4.5 mm value
Thanks
Most welcome please subscribe There are number of such type of videos in this channel.
sirji pitch circle dia kaise nikalna hai??
🎉🎉
Sir can u explained , how u have arrived at the formula for calculating the backlash = 0.6 * teeth module .
Will it be applicable for the newly machined gears only ?
Got answer or not,,
Need a question on the backless. If drive and driven gear have different module so how we calculate accepted backless between both gear teeth. Pls suggest.
Firstly if two gear are in mesh it is necessary that both of them have same module.
@@superfaststudyexperiment Ohh I understand.
What is 0.06 and 4.5 ?
plz describe.
Sir, please tell me,
Which gear we can choose for module,
Pinion,or girth gear (small gear or big gear).
Both have same value you can select any one
If my drive gear is small and driven gear is big for which one I should calculate backlash on those condition
Tq bro
Most welcome
Bhai bearing pr koii vedio bnao
Already kafi sare video hai bhai
Sar ji muje help karo muje ek ger Box banana he pilis
Sir eye jo app bola ki back lesh ke formula 0.6×module
Sir kon se Gear ki module lenge
Spur gears
Bike ka engine ka Torque 1 Newton metre Hai To Uske wheel (tyre) Mein Kitna Newto metre torque lagega torque badega ya gatega
👍👍🇮🇳
Sir, pinion and girth gear root clearance kitna hona chahiye
Module k hisaab se ye formula laga k nikaal lijiye
Dear sir thanks sir 1 video gear indecision ki banaa do
Module m.. no. Of teeth se jo divide kr re h hm..wo teeth kiska hoga?? Drive gear ka ya driven gear ka??
Brother kabhi bhi jab do gear mesh me hote hai unka module same hota hai.
Kisi ka bhi le lo aap same आयेगा