Dam....that was quite nice...I watched all that and wanted to see more. The term "do more with less" is very fitting in this situation. Good stuff right there B...
i set up all 4 in my adj light bridge one, and look fantastic, thanks brian you do awesome job explain everybody, with yours videos how to set up, this small, but great lights.
Brian, I thought it was great! I just bought a pocket spot and can't wait till it arrives. I am new to this, somewhat, but familiar enough to know what it takes to make a show like this. Great Job!
Awesome! Thank You so much for the explanation using this at my next show, just order two extra ADJ Pocket Inno spot. Could you do the same set up with the new ADJ Pocket Inno Scan and Roll?
you know what would be realey cool if there comes an adj inno pocket scan whit all the same features as the spot but then its a scanner and then for a good price because i think that the inno scan led is to expensive and i liked the comscan but it diddn't have seperate color and gobo wheel and that would be nice in a scanner to
Hi Brian! What's your suggestion between de ADJ Inno Pocket and the Chauvet Intimidator 150 (mobile DJ)? Is the higher price of the Chauvet worth it? Thanks!
Does the order of wiring matter when doing this show? I know master is first (out) to the next light , next light. But can I connect in any order master to 3rd light to 2nd light to forth light. And still get this show . Like dmx , order doesn’t matter , wiring order. Thank in advance for any help you can give
I like these little fixtures, but what is the best configuration to use them? I mean is it better to use them on a table. floor, or speaker? I think they are to small to put on top of a totem because they would look like a toy, but if you put them down too low, they will flash in people's eyes. Maybe on a horizontal truss or T-bar, or vertically on a totem. I would get some, but I don't know if they will look strange when I use regular moving heads or regular sized of fixtures. Maybe it's just me being OCD, but I do like to have some balance to the look of the fixtures themselves.
Hey Brian, love those lights. Actualy I have a question about them. For now, I have 2 Inno spot LED. I wondered if it's possible to master slave them as you did with 2 Inno pocket spots? The inno Spot LED would be the master since this one got the UC3 connection. The 2 inno pocket spot would be in the middle.
Usually, master / slave is only going to work properly with identical fixtures. You can try it & see how it goes. I have no idea how they will act or if there will be errors.
Hey Brian, thank you for this vid.. I am getting 4 pocket spots, to go with my rest of the ADJ bunch ( hex p5 and so forth ) As I am watching vids on setups of these movers, I saw this one, and it got me sold :) I am working with my dmx 3 and was wondering if these lights will react in " sound mode" good on the techno party's I light up... Like my HEX P5 spots, even on the lowest setting they react very violently.. These seem to get a good movement on audio... Does that also go on "loud" music ? Thanks again for these vids, and thanks for answering ;)Best Regards, Gijs ( The Netherlands )
Hey nice video, quick question about the pocket inno spots, do yours all startup with the clicking noise whilst booting, then when they are on they are fine??
Yes you have to daisy chain them with DMX cables, but just use the master slave mode on the fixtures. No DMX control needed if you use the pre-set shows.
For such a relatively small fixture, they give out some kick! :)
Thanks for showing this awesome video Brian.
This video just sold me!! I am getting some of these bad boys!!!
They look amazing and are perfect for me who puts all my equipment in my car. Thanks for the great ideas, Brian
Dam....that was quite nice...I watched all that and wanted to see more. The term "do more with less" is very fitting in this situation. Good stuff right there B...
So bright and compact these would look great on totems or truss totems
Awesome show and lights
Very nice I have two and this video is going to help me finally setup a nice show thanks! Keep up the awesome videos!
Just ordered 4 of these to go with my 2 x-move 25r's. Great video as normal Brian thanks.
Superbright superfast these lights are just fantastic
I did the same thing and suspended all 4 of mine and was blown away by how good the sound active was on these units
i set up all 4 in my adj light bridge one, and look fantastic, thanks brian you do awesome job explain everybody, with yours videos how to set up, this small, but great lights.
Great programming, loved the snappy movements and what an awesome venue!
Brian,
I thought it was great! I just bought a pocket spot and can't wait till it arrives. I am new to this, somewhat, but familiar enough to know what it takes to make a show like this. Great Job!
How to setup inno spot light
Awesome display, just bought two waiting for delivery keep me posted o more (UK)
I own 4 of then, very happy how they look thanks brain you really help a lot. dj aldi
Really amazing that this is sound active. Impressive!
Nice video Brian! I own 2 now I have to go get at least 2 more.
Pretty dam amazing!!!!! Nice work.
amazing . you are awesome bud
Another cool video...Thanks
I did a light show with those modes and it was the bomb
249 incl tax in the netherlands, the other version, flat mirror is 169 euro! also seem features
No DMX programming? I'm loving it.
Cool show was that an in built show or did you program/dmx it... nice effect for $300 each I see you had it on Show 0 - on second viewing
Awesome! Thank You so much for the explanation using this at my next show, just order two extra ADJ Pocket Inno spot. Could you do the same set up with the new ADJ Pocket Inno Scan and Roll?
Pretty awesome.
Nice setup with the lights. But, which one is1-2-3-4? Keep up the awesome work!
you know what would be realey cool if there comes an adj inno pocket scan whit all the same features as the spot but then its a scanner and then for a good price because i think that the inno scan led is to expensive and i liked the comscan but it diddn't have seperate color and gobo wheel and that would be nice in a scanner to
Are they the Global Truss f-34 in the background of the video
Hi Brian! What's your suggestion between de ADJ Inno Pocket and the Chauvet Intimidator 150 (mobile DJ)? Is the higher price of the Chauvet worth it? Thanks!
Does the order of wiring matter when doing this show? I know master is first (out) to the next light , next light. But can I connect in any order master to 3rd light to 2nd light to forth light. And still get this show . Like dmx , order doesn’t matter , wiring order. Thank in advance for any help you can give
Great space....
I like these little fixtures, but what is the best configuration to use them? I mean is it better to use them on a table. floor, or speaker? I think they are to small to put on top of a totem because they would look like a toy, but if you put them down too low, they will flash in people's eyes. Maybe on a horizontal truss or T-bar, or vertically on a totem. I would get some, but I don't know if they will look strange when I use regular moving heads or regular sized of fixtures. Maybe it's just me being OCD, but I do like to have some balance to the look of the fixtures themselves.
The light they produce is really what makes them "big", if that makes any sense. You can always mount them on tripods
Do the inno pocket spots slow down in sound active mode for slower paced songs or would I need to use dmx control? @briansredd
Hey Brian,
love those lights.
Actualy I have a question about them. For now, I have 2 Inno spot LED. I wondered if it's possible to master slave them as you did with 2 Inno pocket spots? The inno Spot LED would be the master since this one got the UC3 connection. The 2 inno pocket spot would be in the middle.
Usually, master / slave is only going to work properly with identical fixtures. You can try it & see how it goes. I have no idea how they will act or if there will be errors.
Can you do this with other ADJ fixtures where there get slaved together on different shows settings?
Hey Brian, thank you for this vid.. I am getting 4 pocket spots, to go with my rest of the ADJ bunch ( hex p5 and so forth ) As I am watching vids on setups of these movers, I saw this one, and it got me sold :) I am working with my dmx 3 and was wondering if these lights will react in " sound mode" good on the techno party's I light up... Like my HEX P5 spots, even on the lowest setting they react very violently.. These seem to get a good movement on audio... Does that also go on "loud" music ? Thanks again for these vids, and thanks for answering ;)Best Regards, Gijs ( The Netherlands )
considering they go about the same price with the adj inno scanners. i think the scanners are a better choice
Yeah scanners are pretty cool too. It just depends on what you want to do. For moving heads price wise, these are the best deal out there by far
its cool I need some
So good..
How exactly step by step do you program and set this up? Do you use a computer or controller?
it's all built in programming. th-cam.com/video/WQ9lpWut0Dc/w-d-xo.html
I have 2 and I need to get 2 more
I think that if you want make a video with every ligyt fixture you have. You can do every thing with dmx and you have great controler and fixtures:)
Honestly, it would look a mess & I doubt my 100 amp service would support it. Light shows are less about quantity & all about applications
Hey nice video, quick question about the pocket inno spots, do yours all startup with the clicking noise whilst booting, then when they are on they are fine??
Yeah they are a bit loud when they calibrate.
You should here my Martin Acrobats go through their set-up phase; very loud!
Is there a function on these to only project to the front and over the crowd.
They have 5 built in shows which move them in various configurations. One or two of the shows are more front focused.
This video may help you th-cam.com/video/ohgKfsgUPOw/w-d-xo.html
What does it look like without smoke
You'll loose your aerial effect, but still see all the Gobos on the walls, floor & ceiling
any way to slow down the sound to active mode for bands
bc69006900 Yes, sensitivity can be set from 0-100%. This demo is probably out of the box with sensitivity of 90%
Were any DMX cables used?
Yes you have to daisy chain them with DMX cables, but just use the master slave mode on the fixtures. No DMX control needed if you use the pre-set shows.
$$$$$$$
Great Idea. I have six of this gobos BeeTopper I will try with all six together Thank You
Very nice I have two and this video is going to help me finally setup a nice show thanks! Keep up the awesome videos!